Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSFUP3008 Mapping and Delivery Guide
Apply finishing techniques to upholstered furniture

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MSFUP3008 - Apply finishing techniques to upholstered furniture
Description
Employability Skills
Learning Outcomes and Application This unit of competency covers hand finishing upholstered furniture by the application of concealed and decorative finishing techniques.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must:

hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors

have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification

be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.

Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.

Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.

Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.

Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.

Access is required to appropriate sewing equipment, hardware, fabrics and a work order.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for work
  • Job requirement is identified from work order or other instructions, including any special requirements for finishing
  • Required materials, upholstered components to be finished, and appropriate tools and equipment are identified from work order
  • Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • Items to be finished are assembled in an appropriate work area and inspected for appropriate quality
  • Appropriate tools, equipment and finishing materials and hardware are selected
       
Element: Apply finishing techniques
  • Finishing techniques are applied in accordance with workplace procedures
  • Problems are notified following workplace procedures
  • Finished upholstered item is inspected against work requirement with unsatisfactory finish being redirected for re-working
       
Element: Complete work
  • Finished work is package/stored/tagged and despatched to the next process following workplace procedures
  • Any required documentation is completed and processed following workplace procedures
  • Tools and equipment used are cleaned, maintained as required and stored in accordance with workplace procedures
  • Work area is cleaned with waste and scrap being removed/recycled in accordance with workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Job requirement is identified from work order or other instructions, including any special requirements for finishing

1.2

Required materials, upholstered components to be finished, and appropriate tools and equipment are identified from work order

1.3

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.4

Items to be finished are assembled in an appropriate work area and inspected for appropriate quality

1.5

Appropriate tools, equipment and finishing materials and hardware are selected

2

Apply finishing techniques

2.1

Finishing techniques are applied in accordance with workplace procedures

2.2

Problems are notified following workplace procedures

2.3

Finished upholstered item is inspected against work requirement with unsatisfactory finish being redirected for re-working

3

Complete work

3.1

Finished work is package/stored/tagged and despatched to the next process following workplace procedures

3.2

Any required documentation is completed and processed following workplace procedures

3.3

Tools and equipment used are cleaned, maintained as required and stored in accordance with workplace procedures

3.4

Work area is cleaned with waste and scrap being removed/recycled in accordance with workplace procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Hand sew at least two (2) different items of upholstered furniture using differing sewing techniques, such as cushion mouth and outback

Apply two (2) other finishing techniques to items of upholstered furniture, one (1) concealed and one (1) decorative

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Work requirements including workplace standards

Identification of techniques and procedures for the finishing processes

Fabric types, common faults and inspection procedures

Methods to be used with different fabric types

Design features of upholstered items in relation to the finishing techniques to be used

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Job requirement is identified from work order or other instructions, including any special requirements for finishing

1.2

Required materials, upholstered components to be finished, and appropriate tools and equipment are identified from work order

1.3

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.4

Items to be finished are assembled in an appropriate work area and inspected for appropriate quality

1.5

Appropriate tools, equipment and finishing materials and hardware are selected

2

Apply finishing techniques

2.1

Finishing techniques are applied in accordance with workplace procedures

2.2

Problems are notified following workplace procedures

2.3

Finished upholstered item is inspected against work requirement with unsatisfactory finish being redirected for re-working

3

Complete work

3.1

Finished work is package/stored/tagged and despatched to the next process following workplace procedures

3.2

Any required documentation is completed and processed following workplace procedures

3.3

Tools and equipment used are cleaned, maintained as required and stored in accordance with workplace procedures

3.4

Work area is cleaned with waste and scrap being removed/recycled in accordance with workplace procedures

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Finishing techniques include:

decorative techniques:

braiding

gimping

close and open studding

single and double piping and banding

concealed techniques:

straight edge

shark's teeth

hand sewing techniques, which may be used in both decorative and concealed finishing:

flange cord

cord and ruching

the closure of items, such as cushions

external backs of upholstered furnishings

Tools and equipment include:

a range of needles and threads

tack hammers

hammers and hot melt glue gun

Materials include:

fabrics

leather

upholstery nails

gimping

metal trim

piping and vinyl

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices:

safety glasses/goggle

hair nets

ear muffs/plugs

gloves

footwear and protective clothing

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirement is identified from work order or other instructions, including any special requirements for finishing 
Required materials, upholstered components to be finished, and appropriate tools and equipment are identified from work order 
Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work 
Items to be finished are assembled in an appropriate work area and inspected for appropriate quality 
Appropriate tools, equipment and finishing materials and hardware are selected 
Finishing techniques are applied in accordance with workplace procedures 
Problems are notified following workplace procedures 
Finished upholstered item is inspected against work requirement with unsatisfactory finish being redirected for re-working 
Finished work is package/stored/tagged and despatched to the next process following workplace procedures 
Any required documentation is completed and processed following workplace procedures 
Tools and equipment used are cleaned, maintained as required and stored in accordance with workplace procedures 
Work area is cleaned with waste and scrap being removed/recycled in accordance with workplace procedures 

Forms

Assessment Cover Sheet

MSFUP3008 - Apply finishing techniques to upholstered furniture
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFUP3008 - Apply finishing techniques to upholstered furniture

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: