Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
MSMPER201 Mapping and Delivery Guide
Monitor and control work permits
Version 1.0
Issue Date: June 2024
Qualification | - |
Unit of Competency | MSMPER201 - Monitor and control work permits |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | This unit of competency covers the skills and knowledge required to monitor a work situation in which the activity is conducted under a permit to work. The individual will be required to monitor the work situation for conformance to the permit and immediately intervene if the parameters of the permit are not met or work proceeds outside the boundaries set by the permit. This role is typically carried out by the plant operator for that area or other suitably qualified person. The role of ‘hole watcher’ and ‘fire watcher’ are covered by MSMPER202 Observe permit workThis unit of competency carries a high level of responsibility and the level and area of responsibility of the role is typically prescribed by the permit process. This unit of competency applies to the activities and functions associated with work carried out in a hazard controlled environment. Not all sites/plants will have all permits. Some sites will call permits by other names, e.g. clearances.No licensing, legislative or certification requirements apply to this unit at the time of publication. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. Competency must be achieved before performing this work unsupervised. Therefore this unit will typically be assessed off the job. Where assessment is undertaken on the job appropriate supervision and safety precautions must be provided. The unit should be assessed holistically and the judgement of competence shall be based on a holistic assessment of the evidence. The collection of performance evidence: should provide evidence of the ability to perform over the range of situations which might be expected to be encountered, including typical disruptions to normal, smooth work conditions must include the use of typical permits may use industry-based simulation particularly where safety, lack of opportunity or significant cost is an issue. Off-the-job assessment must sufficiently reflect realistic operational workplace conditions that cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills. Assessment in a simulated environment should use evidence collected from one or more of: walk-throughs demonstration of skills industry-based case studies/scenarios ‘what ifs’. Knowledge evidence may be collected concurrently with performance evidence (provided a record is kept) or through an independent process, such as workbooks, written assessments or interviews (provided a record is kept). Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate. Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit. The regulatory framework will be reflected in workplace policies and procedures and is not required to be independently assessed. Foundation skills are integral to competent performance of the unit and should not be assessed separately. As a minimum, assessors must satisfy the Standards for Registered Training Organisations 2015 assessor requirements. |
||
Prerequisites/co-requisites | |||
Competency Field | Work control systems |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Identify and monitor permit conditions |
|