Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
PMASMELT260 Mapping and Delivery Guide
Form carbon anodes
Version 1.0
Issue Date: June 2024
Qualification | - |
Unit of Competency | PMASMELT260 - Form carbon anodes |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | This unit of competency covers the skills and knowledge required to form carbon anodes as used in the aluminium smelting or similar process. This unit of competency applies to operators who are required to operate and monitor the carbon paste preparation and delivery equipment, carbon anode forming and cooling equipment and ancillary equipment; apply re-start, start-up and shutdown procedures; isolate and de-isolate plant; and recognise and respond to 'out-of-parameter' issues.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate. The operator would be part of a team during start-up and shutdown procedures. This unit of competency does not require the operation of a central control panel.No licensing, legislative or certification requirements apply to this unit at the time of publication. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. The unit should be assessed holistically and the judgement of competence based on a holistic assessment of the evidence. The collection of performance evidence: should occur over a range of situations which include typical disruptions to normal, smooth operation of an operating plant will typically include a supervisor/third-party report focusing on consistent performance and problem recognition and solving. A supervisor/third-party report must be prepared by someone who has a direct, relevant, current relationship with the person being assessed and who is in a position to form a judgement on workplace performance relevant to the unit of competency must include the use of an appropriate industrial item of equipment requiring demonstration of operation, start-up and shutdown procedures and responding to problems may use industry-based simulation for part only of the unit where safety, lack of opportunity or significant cost is an issue. Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills. Assessment in a simulated environment should use evidence collected from one or more of: walk-throughs pilot plant operation demonstration of skills industry-based case studies/scenarios ‘what ifs’. Knowledge evidence may be collected concurrently with performance evidence (provided a record is kept) or through an independent process, such as workbooks, written assessments or interviews (provided a record is kept). Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate. Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit. The regulatory framework will be reflected in workplace policies and procedures and is not required to be independently assessed. Foundation skills are integral to competent performance of the unit and should not be assessed separately. Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator. In addition, the assessor or anyone acting in subject matter expert role in assessment must demonstrate both technical competency and currency. If the assessor cannot demonstrate technical competency and currency they must assess with a subject matter expert who does meet these requirements. Technical competence can be demonstrated through one or more of: relevant VET or other qualification/Statement of Attainment appropriate workplace experience undertaking the type of work being assessed under routine and non-routine conditions appropriate workplace experience supervising/evaluating the type of work being assessed under routine and non-routine conditions Currency can be demonstrated through one or more of: being currently employed undertaking the type of work being assessed being employed by the organisation undertaking the type of work being assessed and having maintained currency in accordance with that organisation’s policies and procedures having consulted/had contact with an organisation undertaking the type of work being assessed within the last twelve months, the consultation/contact being related to assessment conducting on-the-job training/assessments of the type of work being assessed being an active member of a relevant professional body and participating in activities relevant to the assessment of this type of work |
||
Prerequisites/co-requisites | |||
Competency Field | Operations |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Plan and prepare for operations |
| |||||||
Element: Identify and control hazards | ||||||||
Element: Ensure appropriate authorisations have been obtained/issued | ||||||||
Element: Identify work flow path (interruptions or bottlenecks) blockage | ||||||||
Element: Conduct pre-start requirements to procedures |
| |||||||
Element: Conduct isolation as appropriate for pre-start inspections | ||||||||
Element: Prepare equipment for operation | ||||||||
Element: Complete routine equipment checklists | ||||||||
Element: Complete reports as required for equipment inspections | ||||||||
Element: Conduct operations to procedures |
| |||||||
Element: Monitor equipment operation and check operational variables are within parameters | ||||||||
Element: Verify equipment performance throughout the process | ||||||||
Element: Adjust equipment/variables in accordance with procedures | ||||||||
Element: Apply operating principles to resolve problems and take action | ||||||||
Element: Shut down carbon anode forming equipment as required | ||||||||
Element: Conduct routine housekeeping activities | ||||||||
Element: Recognise and respond to emergencies should one arise | ||||||||
Element: Complete records as required for equipment operation and performance | ||||||||
Element: Isolate and de-isolate plant | ||||||||
Element: Make safe for required work | ||||||||
Element: Check plant is ready to be returned to service | ||||||||
Element: De-isolate and prepare plant for return to service |