The Range of Variables provides information about the context in which the unit of competency is carried out. It allows for different work practices and work and knowledge requirements as well as for differences between organisations and workplaces. The following variables may be present for this particular unit:
Maintenance may include:
inspections, lubrication, cleaning and adjustments
routine repairs
identification and replacement of worn parts
confirmation of operational effectiveness
back-ups
changing user codes.
Security equipment and systems may include:
detection devices, audible/visual warning devices
cameras, monitors and control equipment
control panels, intercoms
wireless equipment, car alarms
electronic readers, electronic recognition controls
locks and locking systems
grills, lighting, boom gates, turnstiles
bank pop-up screens
smoke detection devices
electric/mechanical fire safety and fire locking systems
power supplies, batteries
security doors and door controls.
Security systems may be:
electronic
mechanical
computerised
procedural.
Equipment may include:
personal protective equipment
electronic instruments and equipment
diagnostics and testing equipment
installation tools and equipment
staple guns, ladders, cherrypickers
generators, extension cords, torches and lighting
mobile phones and communications equipment
cameras, computers
motor vehicles.
Security systems may be:
electronic
mechanical
computerised
procedural.
Work order information may include:
work schedules and completion dates
job requirements and tasks
specific client requirements
access to site and specific site requirements
resource requirements
OHS requirements
compliance with relevant legislation
budget allocations
warranties and service information.
Tools and equipment may include:
compute, software, back-up disks
test equipment (multimeter)
hand tools, fixing tools, crimp tools, IDC tools
strippers, router, file, drill, power saw
lockpick, pick gun, followers
glass break tester, spirit level
soldering iron, welder
ladder, hoist, drop sheet, batteries
personal protective equipment
communications equipment.
Materials may include:
resistors, parts and components
wire and cable, fixings, solder, insulation tape
springs, pins, oil, silicon, grease
glass cleaner/lens cleaner
glue, paint, patch materials
sealing compound, cleaning compounds
electronic components.
Risks and hazards may include:
non-compliance with building codes and regulations
exposed electrical wiring
manual handling
chemical hazards (battery corrosion)
exposure to:
asbestos
dust
noise
live power
vermin
water
glass fibre
building debris
natural and other gas build-up.
OHS policies and procedures may relate to:
hazardous and risk assessment mechanisms
implementation of safety regulations
safety training
safety systems incorporating:
work clearance procedures
isolation procedures
gas and vapour
monitoring/testing procedures
use of protective equipment and clothing
use of codes of practice.
Organisational requirements may relate to:
legal and organisational operational policies and procedures
operations manuals, induction and training materials
insurance policy agreements
client and organisational confidentiality requirements
organisational goals, objectives, plans, systems and processes
employer and employee rights and responsibilities
own role, responsibility and delegation
quality and continuous improvement processes and standards
client service standards
defined resource parameters
OHS policies, procedures and programs
emergency and evacuation procedures
duty of care, code of conduct, code of ethics
access and equity policy, principles and practice
records and information systems and processes
communication channels and reporting procedures.
Personal protective clothing and equipment may include:
masks, safety glasses, head protection, ear muffs
safety boots, knee pads
gloves
witches hats, flashing lights
warning signs and tapes
fire extinguisher
first aid kit.
Safe operating practices may include:
working safely around electrical wiring, cables and overhead power lines
working safely around tools and equipment
hazard recognition
emergency procedures
awareness of electrical hazards
following confined spaces procedures
administering first aid .
Applicable legislation, codes and national standards may relate to:
compliance with Australian building codes and regulations
compliance with Australian Communications Authority (ACA) cabling standards
relevant Commonwealth/State/Territory legislation which affect organisational operation:
Occupational Health and Safety and safe work practices
environmental issues
equal employment opportunity
industrial relations
anti-discrimination and diversity
licensing arrangements
Australian Standards, quality assurance and certification requirements
relevant industry Codes of Practice
trade practices, award and enterprise agreements
privacy requirements, freedom of information.
Access may involve:
use of access code
disablement of system
removal of housing
access token, keys
phone line access, modem.
Disruptions may affect:
security
time
access
noise
use of communications equipment
business operations.
Appropriate person(s) may include:
clients
site managers
project managers
engineers and technicians
technical experts
line managers/supervisors
colleagues
regulatory personnel
security consultants.
Documentation may relate to:
work log
service/maintenance records
equipment/system problems/faults
warranty conditions and allowances
recommendations for repairs
operational checks and maintenance conducted
testing and commissioning results
parts and components replaced, materials used
costings, receipts, invoice.
The Range of Variables provides information about the context in which the unit of competency is carried out. It allows for different work practices and work and knowledge requirements as well as for differences between organisations and workplaces. The following variables may be present for this particular unit:
Maintenance may include:
inspections, lubrication, cleaning and adjustments
routine repairs
identification and replacement of worn parts
confirmation of operational effectiveness
back-ups
changing user codes.
Security equipment and systems may include:
detection devices, audible/visual warning devices
cameras, monitors and control equipment
control panels, intercoms
wireless equipment, car alarms
electronic readers, electronic recognition controls
locks and locking systems
grills, lighting, boom gates, turnstiles
bank pop-up screens
smoke detection devices
electric/mechanical fire safety and fire locking systems
power supplies, batteries
security doors and door controls.
Security systems may be:
electronic
mechanical
computerised
procedural.
Equipment may include:
personal protective equipment
electronic instruments and equipment
diagnostics and testing equipment
installation tools and equipment
staple guns, ladders, cherrypickers
generators, extension cords, torches and lighting
mobile phones and communications equipment
cameras, computers
motor vehicles.
Security systems may be:
electronic
mechanical
computerised
procedural.
Work order information may include:
work schedules and completion dates
job requirements and tasks
specific client requirements
access to site and specific site requirements
resource requirements
OHS requirements
compliance with relevant legislation
budget allocations
warranties and service information.
Tools and equipment may include:
compute, software, back-up disks
test equipment (multimeter)
hand tools, fixing tools, crimp tools, IDC tools
strippers, router, file, drill, power saw
lockpick, pick gun, followers
glass break tester, spirit level
soldering iron, welder
ladder, hoist, drop sheet, batteries
personal protective equipment
communications equipment.
Materials may include:
resistors, parts and components
wire and cable, fixings, solder, insulation tape
springs, pins, oil, silicon, grease
glass cleaner/lens cleaner
glue, paint, patch materials
sealing compound, cleaning compounds
electronic components.
Risks and hazards may include:
non-compliance with building codes and regulations
exposed electrical wiring
manual handling
chemical hazards (battery corrosion)
exposure to:
asbestos
dust
noise
live power
vermin
water
glass fibre
building debris
natural and other gas build-up.
OHS policies and procedures may relate to:
hazardous and risk assessment mechanisms
implementation of safety regulations
safety training
safety systems incorporating:
work clearance procedures
isolation procedures
gas and vapour
monitoring/testing procedures
use of protective equipment and clothing
use of codes of practice.
Organisational requirements may relate to:
legal and organisational operational policies and procedures
operations manuals, induction and training materials
insurance policy agreements
client and organisational confidentiality requirements
organisational goals, objectives, plans, systems and processes
employer and employee rights and responsibilities
own role, responsibility and delegation
quality and continuous improvement processes and standards
client service standards
defined resource parameters
OHS policies, procedures and programs
emergency and evacuation procedures
duty of care, code of conduct, code of ethics
access and equity policy, principles and practice
records and information systems and processes
communication channels and reporting procedures.
Personal protective clothing and equipment may include:
masks, safety glasses, head protection, ear muffs
safety boots, knee pads
gloves
witches hats, flashing lights
warning signs and tapes
fire extinguisher
first aid kit.
Safe operating practices may include:
working safely around electrical wiring, cables and overhead power lines
working safely around tools and equipment
hazard recognition
emergency procedures
awareness of electrical hazards
following confined spaces procedures
administering first aid .
Applicable legislation, codes and national standards may relate to:
compliance with Australian building codes and regulations
compliance with Australian Communications Authority (ACA) cabling standards
relevant Commonwealth/State/Territory legislation which affect organisational operation:
Occupational Health and Safety and safe work practices
environmental issues
equal employment opportunity
industrial relations
anti-discrimination and diversity
licensing arrangements
Australian Standards, quality assurance and certification requirements
relevant industry Codes of Practice
trade practices, award and enterprise agreements
privacy requirements, freedom of information.
Access may involve:
use of access code
disablement of system
removal of housing
access token, keys
phone line access, modem.
Disruptions may affect:
security
time
access
noise
use of communications equipment
business operations.
Appropriate person(s) may include:
clients
site managers
project managers
engineers and technicians
technical experts
line managers/supervisors
colleagues
regulatory personnel
security consultants.
Documentation may relate to:
work log
service/maintenance records
equipment/system problems/faults
warranty conditions and allowances
recommendations for repairs
operational checks and maintenance conducted
testing and commissioning results
parts and components replaced, materials used
costings, receipts, invoice.