Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

PUADEFDV010B Mapping and Delivery Guide
Employ power tools in an underwater environment

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency PUADEFDV010B - Employ power tools in an underwater environment
Description This unit covers the competency required to use power tools in an underwater environment. This includes the operation (from the surface) of the compressor.The unit also includes selecting appropriate tools for the work task, inspecting them for serviceability and correctly operating the tools, with particular attention to safety.Competence will need to be demonstrated in the surface operation of the compressor.The diver will be responsible for the recovery of any wastes arising from the work task to ensure the preservation of the environment. Finally, the tools (and compressor) must be de serviced and stored appropriately for ongoing use.Note: This Unit of Competency relates, in part, to the existing standards of the Australian Diver Accreditation Scheme (ADAS). All information was correct at the time of development of this Unit of Competency; however, any diver seeking ADAS accreditation should consult ADAS and not rely on the information contained in this unit.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application The application of this unit in the workplace - the environments, complexities and situations involved - will be written during Phase II of the Review of the PUA00 Public Safety Training Package.This text will be useful for the purposes of job descriptions, recruitment advice or job analysis; where possible, it will not be too job specific to allow other industries to import it into other Training Packages, where feasible.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Prerequisite Unit/sPUADEFDV001B Dive using self contained underwater breathing apparatus in open water to 30 metresPUADEFDV008B Employ hand tools in an underwater environment
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to use power tools underwater
  • Work task, worksite data and work object are determined and analysed to determine the specific requirements for power tools
  • Work plan is developed consistent with the dive plan
  • Power tools and protective equipment are selected, inspected and prepared
  • Compressor and associated leads and hoses are selected, inspected and prepared
  • Power tools, compressor, and associated leads and hoses are secured safely to/from the dive site
  • Access obstructions and other hazards are assessed and action is taken to remove/reduce the risk
  • Occupational health and safety (OH&S) requirements and recognised safety precautions are applied in accordance with standard procedures, manufacturers' instructions and legislation
       
Element: Operate power tools underwater
  • Power tools are secured on self during the dive for ease of accessibility and lack of interference with mobility and dive equipment
  • Safe route for leads and hoses is established
  • Work-safe area is established and the location and safety of divers is confirmed prior to commencing work task/s
  • Power tools are operated underwater ensuring management of their associated hazards
  • Operator maintenance is conducted at the worksite on power tools, leads and hoses
  • Power tools are temporarily disconnected and rendered safe to evaluate the work task
       
Element: Operate the compressor
  • Pre-start checks are performed, and hoses and leads are connected
  • Pressure is developed gradually without surging and compressor is stabilised and trimmed to required work output
  • Routine operational checks are conducted and warning signs are diagnosed and addressed
  • Compressor is shut down
  • Emergency shut down is conducted
       
Element: Conclude power tool operations
  • Environmental impact arising from the use of power tools is minimised and waste products are recovered
  • Power tools, leads and hoses are de-serviced after use
  • Compressor is de-serviced after use
  • Equipment log books are completed
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessment must confirm the ability to:

attend to personal and collective safety

consider the environmental impact as part of the dive plan

lift either:

air – clear mud from hole of half a cubic metre or

water – clear mud from hole of half a cubic metre

operate any four of the following:

power wrench, including changing sockets on site; tightening and loosening nuts

drill, including drilling a hole in steel plate; changing bits on site

disc cutter, including cutting steel or concrete; changing disc on site

jack hammer, including breaking concrete

chainsaw, including cutting wooden beams 230 x 100 mm

angle grinder, including cleaning and smoothing a fillet; chamfering a 12 mm plate; changing disc on site

scrubber, including cleaning 2 m2 of horizontal and vertical surface

operate a pneumatic or hydraulic compressor including:

connecting hoses and leads

connecting to the power supply

adjusting output power

switching the compressor on/off.

Consistency in performance

Competency should be demonstrated during a number of work tasks using the power tools outlined in the Critical Aspects of Evidence.

Context of and specific resources for assessment

Context of assessment

Competency should be assessed in the ocean supported by questioning on shore or aboard vessels.

When practicable, assessment should relate to the diver’s vocational focus.

Specific resources for assessment

Access to a complete range of diving, safety and accessory equipment; power tools; and compressor, leads and hoses.

Guidance information for assessment

Information that will assist or guide assessment will be written during Phase II of the Review of the PUA00 Public Safety Training Package.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level, required for this unit.

Required Skills

ability to dive

conduct general operator maintenance

diagnose equipment faults

employ power tools and equipment

take remedial actions

Required Knowledge

dive equipment

dive physics

equipment (compressor, power tools, hoses and leads):

causes and remedies for surging

control of output

effects of temperature and compression ratio pressure/temperature relationships and effects on condensation (e.g. moisture and/or gas)

methods of resolving problems

principles of operation

physics of operation

general occupational/diving safety awareness

oceanography

relevant references and Australian Standards

use of compressor

use of power tools on land

work hazards

The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.

Work task may include

Bending

Chiselling

Cleaning/de-rusting

Cutting

Fastening

Grinding

Hammering

Nailing

Stapling

Tightening and loosening bolts and screws

Twisting

Worksite data may include

Composition of work object

Condition of work object

Current

Depth

Gradient

Hazards

Obstacles

Work object may include

Anchorage

Cable

Cement slab/foundation

Composition such as:

aluminium

fibreglass

high and low alloy steels

high and low carbon steels

mild steel

stainless steel

timber

Condition

Pipe

Sheet (hull)

Submerged object e.g. vehicle, boat

Support/strut

Power tools may include (hydraulic or pneumatic)

Angle grinders

Drills

Jackhammers

Nail guns

Pneumatic wrenches

Sanders

Saws

Screwdrivers

Water jet

Protective equipment may include

Boots

Ear protection

Gloves

Selecting, inspecting and preparing power tools and protective equipment may include

Honing

Loading

Oiling/greasing

Sharpening

Compressor may include

Hydraulic

Pneumatic

Selecting, inspecting and preparing compressor may include

Checking fluids

Fuelling

Pre-start checks

Action to remove/reduce the risk may include

Erecting signage

Using patrol/sentry craft

Operation of pneumatic/ hydraulic tools may include

General:

changing power settings and directions

changing tools

replacing (drill) bits, belts and blades

Specific:

bending

chiselling

cleaning/de-rusting

cutting fastening

grinding

hammering

nailing

smashing

sucking

tightening and loosening bolts and screws

twisting

Hazards may include

Fall zone of objects being worked on

Impact of power tool on dive equipment (e.g. hoses, gauges, communications)

Operational zone of power tool

Release of fuels and associated chemical contaminants resident at the worksite

Operator maintenance of pneumatic/hydraulic tools may include

Removing blockages and work debris from the tool

Tightening tool fittings after prolonged use

Routine operational checks may include

Fluids

Fuel

Pressure

Temperature

Warning signs may include

Feed variations

Rise/fall in temperature

Smoke

Surging (rise/fall in power)

Unusual noise

Unusual smell (e.g. oil)

Environmental impact may include

Contamination of surrounding water (e.g. leaking oil)

Physical damage to reef and associated floor eco-systems (e.g. coral)

Visual pollution of waste material (e.g. concrete and metal parts)

De-servicing may include

Drying

Logging work details into equipment logs

Oiling/greasing

Washing in fresh water

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work task, worksite data and work object are determined and analysed to determine the specific requirements for power tools 
Work plan is developed consistent with the dive plan 
Power tools and protective equipment are selected, inspected and prepared 
Compressor and associated leads and hoses are selected, inspected and prepared 
Power tools, compressor, and associated leads and hoses are secured safely to/from the dive site 
Access obstructions and other hazards are assessed and action is taken to remove/reduce the risk 
Occupational health and safety (OH&S) requirements and recognised safety precautions are applied in accordance with standard procedures, manufacturers' instructions and legislation 
Power tools are secured on self during the dive for ease of accessibility and lack of interference with mobility and dive equipment 
Safe route for leads and hoses is established 
Work-safe area is established and the location and safety of divers is confirmed prior to commencing work task/s 
Power tools are operated underwater ensuring management of their associated hazards 
Operator maintenance is conducted at the worksite on power tools, leads and hoses 
Power tools are temporarily disconnected and rendered safe to evaluate the work task 
Pre-start checks are performed, and hoses and leads are connected 
Pressure is developed gradually without surging and compressor is stabilised and trimmed to required work output 
Routine operational checks are conducted and warning signs are diagnosed and addressed 
Compressor is shut down 
Emergency shut down is conducted 
Environmental impact arising from the use of power tools is minimised and waste products are recovered 
Power tools, leads and hoses are de-serviced after use 
Compressor is de-serviced after use 
Equipment log books are completed 

Forms

Assessment Cover Sheet

PUADEFDV010B - Employ power tools in an underwater environment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

PUADEFDV010B - Employ power tools in an underwater environment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: