Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIINHB222 Mapping and Delivery Guide
Assist sonic drilling operations

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIINHB222 - Assist sonic drilling operations
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to assist in the sonic drilling process and collect sonic samples. It applies to those working in drillers assistant roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Mandatory conditions for assessment of this unit are stipulated below. The assessment must:

include access to:

personal protective equipment

equipment required to assist sonic drilling

be conducted in a safe environment; and,

be assessed in the context of this sector's work environment; and,

be assessed in compliance with relevant legislation/regulation and using policies, procedures and processes directly related to the industry sector for which it is being assessed; and,

confirm consistent performance can be applied in a range of relevant workplace circumstances.

Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated work environment* provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.

Assessor requirements

Assessors must be able to clearly demonstrate current and relevant industry knowledge and experience to satisfy the mandatory regulatory standards as set out in the Standards for Registered Training Organisations (RTOs) 2015/Australian Quality Training Framework mandatory requirements for assessors current at the time of assessment and any relevant licensing and certification requirements. This includes:

vocational competencies at least to the level being delivered and assessed

current industry skills directly relevant to the training and assessment being provided

current knowledge and skills in vocational training and learning that informs their training and assessment

formal relevant qualifications in training and assessment

having knowledge of and/or experience using the latest techniques and processes

possessing the required level of RII training product knowledge

having an understanding and knowledge of legislation and regulations relevant to the industry and to employment and workplaces

demonstrating the performance evidence, and knowledge evidence outlined in this unit of competency, and

the minimum years of current** work experience after competency has been obtained as specified below in an industry sector relevant to the outcomes of the unit.

It is also acceptable for the appropriately qualified assessor to work with an industry expert to conduct assessment together and for the industry expert to be involved in the assessment judgement. The industry expert must have current industry skills directly relevant to the training and assessment being provided. This means the industry subject matter expert must demonstrate skills and knowledge from the minimum years of current work experience after competency has been obtained as specified below, including time spent in roles related to the unit being assessed:

Industry sector

AQF indicator level***

Required assessor or industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Infrastructure

1

1 year

2

2 years

Drilling, Coal Mining, Extractive (Quarrying), Metalliferous Mining and Civil Infrastructure

3-6

3 years

Other sectors

Where this unit is being assessed outside of the resources and infrastructure sectors assessor and/or industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no industry standard is specified should comply with any relevant regulation.

*Guidance on simulated environments has been stipulated in the RII implementation guide located on VETNet.

**Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting a minimum number of site assessments as determined by the relevant industry sector, across various locations.

*** While a unit of competency does not have an AQF level, where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered as the AQF indicator level for assessment purposes.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare to assist sonic drilling
  • Obtain, interpret and confirm work requirements
  • Access, interpret and apply documentation required to conduct sonic drilling operations and confirm work activity is compliant
  • Identify and minimise environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures
  • Select and wear personal protective equipment required for work activity
  • Communicate with other personnel at site according to work requirements and confirm briefings and handover details are communicated and received
  • Load, unload and move tools and equipment
  • Confirm adequate consumables are available for the drilling program
  • Confirm drill site is free of trip hazards
  • Connect water according to site requirements
       
Element: Assist in sonic drilling process
  • Inspect core barrels, rods, casing, bits, threads and associated equipment for damage and fatigue from sonic vibration
  • Prepare drill string and casing string in readiness for tripping and drilling
  • Inspect rod handling equipment for damage and/or wear
  • Use mechanical lifting device to transfer drill rods and casing to/from rod handling equipment and/or mast
  • Assist driller in tripping rods and casing in/out of hole
  • Prepare sufficient poly bags, trays, and/or PVC splits for sample presentation
  • Assist driller to setup for sample retrieval
  • Designate appropriate area for sample placement and presentation
  • Confirm core barrel is not too hot to touch
  • Guide sample into polybag/tray/PVC split
  • Clearly label sample depth
  • Lay sample out in designated area for presentation
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

assist sonic drilling on at least two occasions, including:

setting up and packing up of sonic drill site

retrieving, marking-up and laying out sonic sample

assisting in tripping rods and casing in and out of hole

inspecting core barrels, rods, casing, bits and other downhole equipment

During the above, the candidate must:

locate and apply legislation, documentation, policies and procedures required to assist sonic drilling

implement the requirements, procedures and techniques for assisting sonic drilling, including:

keeping work area clean

selecting and wearing required protective clothing and equipment

conducting pre-operational checks

reporting immediately any malfunction or equipment failure

work with others to assist sonic drilling that meets required outcomes, including:

organising work activities to meet all task requirements

communicating with others to receive and clarify work instructions

reporting regularly to and work as directed by the driller.

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

key policies, procedures and established requirements for assisting sonic drilling, including those for:

work health and safety

emergencies

identifying hazards relevant to sonic drilling

environmental considerations

housekeeping

types of sonic core barrels, bits, casing and shoes (left hand and right hand threads)

line of fire hazards associated with sonic drilling sample removal.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Obtain, interpret and confirm work requirements 
Access, interpret and apply documentation required to conduct sonic drilling operations and confirm work activity is compliant 
Identify and minimise environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures 
Select and wear personal protective equipment required for work activity 
Communicate with other personnel at site according to work requirements and confirm briefings and handover details are communicated and received 
Load, unload and move tools and equipment 
Confirm adequate consumables are available for the drilling program 
Confirm drill site is free of trip hazards 
Connect water according to site requirements 
Inspect core barrels, rods, casing, bits, threads and associated equipment for damage and fatigue from sonic vibration 
Prepare drill string and casing string in readiness for tripping and drilling 
Inspect rod handling equipment for damage and/or wear 
Use mechanical lifting device to transfer drill rods and casing to/from rod handling equipment and/or mast 
Assist driller in tripping rods and casing in/out of hole 
Prepare sufficient poly bags, trays, and/or PVC splits for sample presentation 
Assist driller to setup for sample retrieval 
Designate appropriate area for sample placement and presentation 
Confirm core barrel is not too hot to touch 
Guide sample into polybag/tray/PVC split 
Clearly label sample depth 
Lay sample out in designated area for presentation 

Forms

Assessment Cover Sheet

RIINHB222 - Assist sonic drilling operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIINHB222 - Assist sonic drilling operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: