Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIIOGD401E Mapping and Delivery Guide
Rig up, conduct pre-spud operations and rig down

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIIOGD401E - Rig up, conduct pre-spud operations and rig down
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to rig up, conduct pre-spud operations and rig down in drilling.This unit applies to those working in supervisory roles. They generally perform tasks involving a broad range of varied activities most of which are complex and non-routine and are responsible for the quantity and quality of the output of others.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Mandatory conditions for assessment of this unit are stipulated below. The assessment must:

include access to:

personal protective equipment

equipment required to rig up, conduct pre-spud operations and rig down

be conducted in a safe environment; and,

be assessed in the context of this sector's work environment; and,

be assessed in compliance with relevant legislation/regulation and using policies, procedures and processes directly related to the industry sector for which it is being assessed; and,

confirm consistent performance can be applied in a range of relevant workplace circumstances.

Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated work environment* provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.

Assessor requirements

Assessors must be able to clearly demonstrate current and relevant industry knowledge and experience to satisfy the mandatory regulatory standards as set out in the Standards for Registered Training Organisations 2015/Australian Quality Training Framework mandatory requirements for assessors current at the time of assessment and any relevant licensing and certification requirements. This includes:

vocational competencies at least to the level being delivered and assessed

current industry skills directly relevant to the training and assessment being provided

current knowledge and skills in vocational training and learning that informs their training and assessment

formal relevant qualifications in training and assessment

having knowledge of and/or experience using the latest techniques and processes

possessing the required level of RII training product knowledge

having an understanding and knowledge of legislation and regulations relevant to the industry and to employment and workplaces

demonstrating the performance evidence, and knowledge evidence outlined in this unit of competency, and

the minimum years of current** work experience after competency has been obtained as specified below in an industry sector relevant to the outcomes of the unit.

It is also acceptable for the appropriately qualified assessor to work with an industry expert to conduct assessment together and for the industry expert to be involved in the assessment judgement. The industry expert must have current industry skills directly relevant to the training and assessment being provided. This means the industry subject matter expert must demonstrate skills and knowledge from the minimum years of current work experience after competency has been obtained as specified below, including time spent in roles related to the unit being assessed:

Industry sector

AQF indicator level***

Required assessor or industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Infrastructure

1

1 year

2

2 years

Drilling, Coal Mining, Extractive (Quarrying), Metalliferous Mining and Civil Infrastructure

3-6

3 years

Other sectors

Where this unit is being assessed outside of the resources and infrastructure sectors assessor and/or industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no industry standard is specified should comply with any relevant regulation.

*Guidance on simulated environments has been stipulated in the RII Companion Volume Implementation Guide located on VETNet.

**Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting a minimum number of site assessments as determined by the relevant industry sector, across various locations.

*** While a unit of competency does not have an AQF level, where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered as the AQF indicator level for assessment purposes.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to rig up, conduct pre-spud operations and rig down
  • Obtain, interpret and confirm work requirements
  • Access, interpret and apply documentation required to rig up, conduct pre-spud operations and rig down and confirm work activity is compliant
  • Identify and minimise environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures
  • Select and wear personal protective equipment required for work activities
  • Communicate with other personnel at site according to work requirements and confirm briefings and handover details are communicated and received
  • Carry out pre rig-up procedure inspections within scope of own role
  • Coordinate movement of load and sequence of installation and location
  • Check equipment for damage and loss by moving contractor and report and BI
  • Receive and action rig manager authorisation to commence rig-up to spud operations
  • Receive detailed verbal and written instructions on use and type of mud from the operator and distribute
  • Identify potential rig-up problems and take corrective action as required
  • Keep rig manager informed of operations
       
Element: Prepare for drilling of surface hole/subsea hole
  • Check drilling and hoist equipment, report any damage to rig manager and record
  • Conduct equipment checks for nippling-up or cross-checked with relevant procedures
  • Check handling equipment for correct sizing and confirm fit for purpose
  • Confirm availability of and inspect, clean, calibrate and record tubulars according to manufacturer specifications
  • Check well control equipment according to manufacturer specifications
  • Identify special tool requirements and check if fit for purpose and approved for use
       
Element: Prepare for pre-spud operations
  • Lock rod racks with drill rod and position drill collars
  • Inspect casing running tools for safety and fitness-for-purpose and rectify and report faults and malfunctions as required
  • Record casing tallies and report
       
Element: Conduct operations as per drilling program
  • Determine optimum circulating and penetration rates and check deviations are in accordance with operators drilling program
  • Check mud cleaning equipment and screens for integrity and correct operation according to workplace procedures
  • Check drilling fluid quantities with sufficient being in reserve to kill well and keep hole on full trip
  • Record mud properties on tour report
  • Operate all equipment according to manufacturer specifications and company procedures
  • Maintain a sound working relationship with third party contractors
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

rig-up, conduct pre-spud operations and rig down on at least two occasions, including:

identifying potential rig-up problems

checking drilling and hoist equipment

determining optimum circulating and penetration rates and checking deviations

receiving and actioning authorisation to commence drilling

identifying potential rig-down operations

carrying out supervision of rig up, pre-spud and rig down operations that meets required outcomes.

During the above, the candidate must:

locate and apply required documentation, policies and procedures

implement the requirements, procedures and techniques to rig up, conduct pre-spud operations and rig down, including:

identifying, addressing and reporting potential hazards and risks

checking equipment for damage and loss by the moving contractor and reporting as required

preventing usage of damaged equipment as required

identifying, addressing and reporting environmental issues

work with others to plan, prepare and conduct rig up, pre-spud and rig down operations to meet required outcomes, including:

resolving coordination requirements with others at the site prior to commencing and during work activities

carrying out pre rig-up procedure inspections within scope of own role

coordinating movement of load and sequence of installation and location according to rig movement plan

preparing for and organising work activities to meet task requirements

communicating with others to receive and clarify work instructions

using a range of communication techniques and aids to advise others of work activity and exclusion zones.

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

key legislation required for rigging up, conducting pre-spud operations and rigging down

key policies, procedures and established requirements for rigging up, conducting pre-spud operations and rigging down, including those for:

identifying and managing risks

identifying, addressing and reporting environmental issues

setting up work activity

site isolation, signage and erecting barriers

work health and safety

selecting all plant, tools and equipment to carry out tasks and checking for faults

carrying out work to specifications

communication techniques relevant to work activities

troubleshoot during drilling program

carrying out calculations, including:

quantities

up-hole velocity

specific gravity

volume

hydrostatic pressures

optimum circulating and penetration rates.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Obtain, interpret and confirm work requirements 
Access, interpret and apply documentation required to rig up, conduct pre-spud operations and rig down and confirm work activity is compliant 
Identify and minimise environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures 
Select and wear personal protective equipment required for work activities 
Communicate with other personnel at site according to work requirements and confirm briefings and handover details are communicated and received 
Carry out pre rig-up procedure inspections within scope of own role 
Coordinate movement of load and sequence of installation and location 
Check equipment for damage and loss by moving contractor and report and BI 
Receive and action rig manager authorisation to commence rig-up to spud operations 
Receive detailed verbal and written instructions on use and type of mud from the operator and distribute 
Identify potential rig-up problems and take corrective action as required 
Keep rig manager informed of operations 
Check drilling and hoist equipment, report any damage to rig manager and record 
Conduct equipment checks for nippling-up or cross-checked with relevant procedures 
Check handling equipment for correct sizing and confirm fit for purpose 
Confirm availability of and inspect, clean, calibrate and record tubulars according to manufacturer specifications 
Check well control equipment according to manufacturer specifications 
Identify special tool requirements and check if fit for purpose and approved for use 
Lock rod racks with drill rod and position drill collars 
Inspect casing running tools for safety and fitness-for-purpose and rectify and report faults and malfunctions as required 
Record casing tallies and report 
Determine optimum circulating and penetration rates and check deviations are in accordance with operators drilling program 
Check mud cleaning equipment and screens for integrity and correct operation according to workplace procedures 
Check drilling fluid quantities with sufficient being in reserve to kill well and keep hole on full trip 
Record mud properties on tour report 
Operate all equipment according to manufacturer specifications and company procedures 
Maintain a sound working relationship with third party contractors 

Forms

Assessment Cover Sheet

RIIOGD401E - Rig up, conduct pre-spud operations and rig down
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIOGD401E - Rig up, conduct pre-spud operations and rig down

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: