Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIIOGF201D Mapping and Delivery Guide
Carry out deck operations

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIIOGF201D - Carry out deck operations
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to apply carry out deck operations in Drilling.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for deck operations
  • Access, interpret and apply documentation and procedures for carrying out deck operations and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential hazards, risks and environmental issues and implement control measures
  • Select and wear personal protective equipment appropriate to the work activities
  • Resolve coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated
  • Confirm availability and status of necessary permits Confirm availability of necessary auxiliary utilities
       
Element: Carry out deck operations
  • Carry out deck operations safely
  • Identify faults and take appropriate corrective actions within functional responsibility
  • Attend to spillages
  • Conform to safe working practices
       
Element: Assist drill crew as directed
  • Place and tier tubulures in racks
  • Measure and label tubulures and record details
  • Operate air tugger winches
  • Assist with positioning blow out prevention (BOP) over moonpool
  • Assists crane operator in supplying marine riser and moving tools to the drill floor
       
Element: Operate pneumatic and electric power tools
  • Operate pneumatic and electric power tools
  • Identify faults with equipment and repair or report to relevant personnel
       
Element: Provide labour for loading and discharge of helicopters as directed
  • Use approved safety approach sectors for access to and from the aircraft
  • Fuel aircraft under the direction of the aircraft captain and using approved fuelling procedures
  • Lift/move baggage and cargo between rig and helicopter using correct lifting techniques
       
Element: Provide labour for making up drilling mud
  • Read, interpret, confirm and apply mud safety data sheet
  • Apply correct lifting techniques for handling of sack material
       
Element: Conduct housekeeping activities
  • Clean, check, maintain and store plant, tools and equipment
  • Report issues identified with plant, tools and equipment
       
Element: Plan and prepare for deck operations
  • Access, interpret and apply documentation and procedures for carrying out deck operations and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential hazards, risks and environmental issues and implement control measures
  • Select and wear personal protective equipment appropriate to the work activities
  • Resolve coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated
  • Confirm availability and status of necessary permits Confirm availability of necessary auxiliary utilities
       
Element: Carry out deck operations
  • Carry out deck operations safely
  • Identify faults and take appropriate corrective actions within functional responsibility
  • Attend to spillages
  • Conform to safe working practices
       
Element: Assist drill crew as directed
  • Place and tier tubulures in racks
  • Measure and label tubulures and record details
  • Operate air tugger winches
  • Assist with positioning blow out prevention (BOP) over moonpool
  • Assists crane operator in supplying marine riser and moving tools to the drill floor
       
Element: Operate pneumatic and electric power tools
  • Operate pneumatic and electric power tools
  • Identify faults with equipment and repair or report to relevant personnel
       
Element: Provide labour for loading and discharge of helicopters as directed
  • Use approved safety approach sectors for access to and from the aircraft
  • Fuel aircraft under the direction of the aircraft captain and using approved fuelling procedures
  • Lift/move baggage and cargo between rig and helicopter using correct lifting techniques
       
Element: Provide labour for making up drilling mud
  • Read, interpret, confirm and apply mud safety data sheet
  • Apply correct lifting techniques for handling of sack material
       
Element: Conduct housekeeping activities
  • Clean, check, maintain and store plant, tools and equipment
  • Report issues identified with plant, tools and equipment
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for deck operations

1.1. Access, interpret and apply documentation and procedures for carrying out deck operations and ensure the work activity is compliant

1.2. Obtain, read, interpret, clarify and confirm work requirements

1.3. Identify and address potential hazards, risks and environmental issues and implement control measures

1.4. Select and wear personal protective equipment appropriate to the work activities

1.5. Resolve coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated

1.6. Confirm availability and status of necessary permits Confirm availability of necessary auxiliary utilities

2. Carry out deck operations

2.1 Carry out deck operations safely

2.2. Identify faults and take appropriate corrective actions within functional responsibility

2.3. Attend to spillages

2.4. Conform to safe working practices

3. Assist drill crew as directed

3.1. Place and tier tubulures in racks

3.2. Measure and label tubulures and record details

3.3. Operate air tugger winches

3.4. Assist with positioning blow out prevention (BOP) over moonpool

3.5. Assists crane operator in supplying marine riser and moving tools to the drill floor

4. Operate pneumatic and electric power tools

4.1. Operate pneumatic and electric power tools

4.2. Identify faults with equipment and repair or report to relevant personnel

5. Provide labour for loading and discharge of helicopters as directed

5.1. Use approved safety approach sectors for access to and from the aircraft

5.2. Fuel aircraft under the direction of the aircraft captain and using approved fuelling procedures

5.3. Lift/move baggage and cargo between rig and helicopter using correct lifting techniques

6. Provide labour for making up drilling mud

6.1. Read, interpret, confirm and apply mud safety data sheet

6.2. Apply correct lifting techniques for handling of sack material

7. Conduct housekeeping activities

7.1. Clean, check, maintain and store plant, tools and equipment

7.2. Report issues identified with plant, tools and equipment

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies applicable documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of carrying out deck operations including:

apply legislative, organisation and site requirements and procedures for carrying out deck operations

carry out duties of a crane chaser/dogger according to company and statutory requirements

demonstrates completion of carrying out deck operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

selecting and fitting correct stinger/slings appropriate for crane load

placing, measuring, labelling and recording details of tubulures

operate power tools

wearing appropriate personal protective clothing and equipment during operation of power tools

assisting in running/recovery of bop stack

assisting in supply of marine riser and equipment to drill floor

assisting in loading/discharge and fuelling of helicopter

assisting Derrickman in making up drilling mud

reading and interpreting standard operating procedures, work instructions and data sheets

The candidate must demonstrate knowledge of the following in applying the carry out deck operations through:

completeing deck operations

applying company and statutory safety guidelines, procedures and practices

applying safe operating procedures

using equipment operations

following reporting procedures

understanding reasons for identification and care of samples including storage and transport

complying with occupational health, safety and environment requirements and procedures

using of safety data sheet (SDS)

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for deck operations

1.1. Access, interpret and apply documentation and procedures for carrying out deck operations and ensure the work activity is compliant

1.2. Obtain, read, interpret, clarify and confirm work requirements

1.3. Identify and address potential hazards, risks and environmental issues and implement control measures

1.4. Select and wear personal protective equipment appropriate to the work activities

1.5. Resolve coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated

1.6. Confirm availability and status of necessary permits Confirm availability of necessary auxiliary utilities

2. Carry out deck operations

2.1 Carry out deck operations safely

2.2. Identify faults and take appropriate corrective actions within functional responsibility

2.3. Attend to spillages

2.4. Conform to safe working practices

3. Assist drill crew as directed

3.1. Place and tier tubulures in racks

3.2. Measure and label tubulures and record details

3.3. Operate air tugger winches

3.4. Assist with positioning blow out prevention (BOP) over moonpool

3.5. Assists crane operator in supplying marine riser and moving tools to the drill floor

4. Operate pneumatic and electric power tools

4.1. Operate pneumatic and electric power tools

4.2. Identify faults with equipment and repair or report to relevant personnel

5. Provide labour for loading and discharge of helicopters as directed

5.1. Use approved safety approach sectors for access to and from the aircraft

5.2. Fuel aircraft under the direction of the aircraft captain and using approved fuelling procedures

5.3. Lift/move baggage and cargo between rig and helicopter using correct lifting techniques

6. Provide labour for making up drilling mud

6.1. Read, interpret, confirm and apply mud safety data sheet

6.2. Apply correct lifting techniques for handling of sack material

7. Conduct housekeeping activities

7.1. Clean, check, maintain and store plant, tools and equipment

7.2. Report issues identified with plant, tools and equipment

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply documentation and procedures for carrying out deck operations and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential hazards, risks and environmental issues and implement control measures 
Select and wear personal protective equipment appropriate to the work activities 
Resolve coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated 
Confirm availability and status of necessary permits Confirm availability of necessary auxiliary utilities 
Carry out deck operations safely 
Identify faults and take appropriate corrective actions within functional responsibility 
Attend to spillages 
Conform to safe working practices 
Place and tier tubulures in racks 
Measure and label tubulures and record details 
Operate air tugger winches 
Assist with positioning blow out prevention (BOP) over moonpool 
Assists crane operator in supplying marine riser and moving tools to the drill floor 
Operate pneumatic and electric power tools 
Identify faults with equipment and repair or report to relevant personnel 
Use approved safety approach sectors for access to and from the aircraft 
Fuel aircraft under the direction of the aircraft captain and using approved fuelling procedures 
Lift/move baggage and cargo between rig and helicopter using correct lifting techniques 
Read, interpret, confirm and apply mud safety data sheet 
Apply correct lifting techniques for handling of sack material 
Clean, check, maintain and store plant, tools and equipment 
Report issues identified with plant, tools and equipment 
Access, interpret and apply documentation and procedures for carrying out deck operations and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential hazards, risks and environmental issues and implement control measures 
Select and wear personal protective equipment appropriate to the work activities 
Resolve coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated 
Confirm availability and status of necessary permits Confirm availability of necessary auxiliary utilities 
Carry out deck operations safely 
Identify faults and take appropriate corrective actions within functional responsibility 
Attend to spillages 
Conform to safe working practices 
Place and tier tubulures in racks 
Measure and label tubulures and record details 
Operate air tugger winches 
Assist with positioning blow out prevention (BOP) over moonpool 
Assists crane operator in supplying marine riser and moving tools to the drill floor 
Operate pneumatic and electric power tools 
Identify faults with equipment and repair or report to relevant personnel 
Use approved safety approach sectors for access to and from the aircraft 
Fuel aircraft under the direction of the aircraft captain and using approved fuelling procedures 
Lift/move baggage and cargo between rig and helicopter using correct lifting techniques 
Read, interpret, confirm and apply mud safety data sheet 
Apply correct lifting techniques for handling of sack material 
Clean, check, maintain and store plant, tools and equipment 
Report issues identified with plant, tools and equipment 

Forms

Assessment Cover Sheet

RIIOGF201D - Carry out deck operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIOGF201D - Carry out deck operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: