Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIIOGN201E Mapping and Delivery Guide
Carry out rig lease operations

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIIOGN201E - Carry out rig lease operations
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to apply carry out rig lease operations in drilling.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy the Standards for Registered Training Organisations (RTOs) 2015/AQTF mandatory competency requirements for assessors; and industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other units of competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this unit of competency, and through the minimum years of current* work experience specified below in an industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an industry subject matter expert. The industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the industry sector, including time spent in roles related to the unit being assessed; and,

assessor and industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or industry sector as follows:

Industry sector

AQF** Level

Required assessor or industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this unit is being assessed outside of the Resources and Infrastructure Sectors, assessor and/or industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and, where no industry standard is specified, should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered to indicate the AQF level.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for rig lease operations
  • Access, interpret and apply documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify, address and report potential hazards, risks and environmental issues and implement control measures
  • Select and wear personal protective equipment appropriate to the work activities
  • Adhere to coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated
  • Place and tier tubular in appropriate racks
  • Measure, label and record tubular
       
Element: Operate pneumatic and electric power tools
  • Operate pneumatic and electric power tools
  • Identify faults with equipment and repair or report to relevant personnel
       
Element: Assist drill crew in running and recovery of blow out prevention stack
  • Assist winch operator as directed
  • Assist in positioning blow out prevention equipment
  • Assist crew by supplying tools to the drill floor as required
       
Element: Provide labour for loading and unloading transport
  • Use approved safety approach
  • Use correct lifting techniques
       
Element: Provide labour for making up drilling mud
  • Access and interpret safety data sheet
  • Use correct manual handling techniques
  • Use safety equipment correctly in event of personal contact with hazardous materials
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for rig lease operations

1.1. Access, interpret and apply documentation and ensure the work activity is compliant

1.2. Obtain, read, interpret, clarify and confirm work requirements

1.3. Identify, address and report potential hazards, risks and environmental issues and implement control measures

1.4. Select and wear personal protective equipment appropriate to the work activities

1.5. Adhere to coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated

1.6. Place and tier tubular in appropriate racks

1.7. Measure, label and record tubular

2. Operate pneumatic and electric power tools

2.1. Operate pneumatic and electric power tools

2.2. Identify faults with equipment and repair or report to relevant personnel

3. Assist drill crew in running and recovery of blow out prevention stack

3.1. Assist winch operator as directed

3.2. Assist in positioning blow out prevention equipment

3.3. Assist crew by supplying tools to the drill floor as required

4. Provide labour for loading and unloading transport

4.1. Use approved safety approach

4.2. Use correct lifting techniques

5. Provide labour for making up drilling mud

5.1. Access and interpret safety data sheet

5.2. Use correct manual handling techniques

5.3. Use safety equipment correctly in event of personal contact with hazardous materials

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include that the candidate:

locates and applies applicable documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of rig lease operations including:

identifying, addressing and reporting potential hazards and risks

controlling identified hazards

identifying, addressing and reporting environmental issues

preparing written records and reports

rectifying and/or reporting faults and malfunctions

works effectively with others to undertake and complete rig lease operations that meets all of the required outcomes including:

complying with written and verbal reporting requirements and procedures

communicating clearly and concisely with others to receive and clarify work instructions

communicating clearly and concisely with others to resolve coordination requirements prior to commencing and during work activities

demonstrates completion of rig lease operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

selecting and fitting correct stinger/slings appropriate for loads

transferring equipment by forklift

placing, measuring, labelling and recording details of tubular

assisting in running/recovery of blow out prevention stack

operating air tugger winch if required

assisting in supply of transport equipment to drill floor and loading/unloading

mixing drilling fluid

The candidate must demonstrate knowledge of the following in carrying out rig lease operations through:

compliance with legislative, organisation and site requirements and procedures for carrying out rig lease operations for:

identification and management of risks

identification and management of environmental issues

set up for work activity

site isolation, signage and erecting barriers

work health and safety

identification of faults, all plant, tools and equipment to carry out tasks

specifications for work

drill floor operations

safe operational practices undertaking numerical tasks involving measurement, e.g. tapes, rulers, calibration devices

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for rig lease operations

1.1. Access, interpret and apply documentation and ensure the work activity is compliant

1.2. Obtain, read, interpret, clarify and confirm work requirements

1.3. Identify, address and report potential hazards, risks and environmental issues and implement control measures

1.4. Select and wear personal protective equipment appropriate to the work activities

1.5. Adhere to coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated

1.6. Place and tier tubular in appropriate racks

1.7. Measure, label and record tubular

2. Operate pneumatic and electric power tools

2.1. Operate pneumatic and electric power tools

2.2. Identify faults with equipment and repair or report to relevant personnel

3. Assist drill crew in running and recovery of blow out prevention stack

3.1. Assist winch operator as directed

3.2. Assist in positioning blow out prevention equipment

3.3. Assist crew by supplying tools to the drill floor as required

4. Provide labour for loading and unloading transport

4.1. Use approved safety approach

4.2. Use correct lifting techniques

5. Provide labour for making up drilling mud

5.1. Access and interpret safety data sheet

5.2. Use correct manual handling techniques

5.3. Use safety equipment correctly in event of personal contact with hazardous materials

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify, address and report potential hazards, risks and environmental issues and implement control measures 
Select and wear personal protective equipment appropriate to the work activities 
Adhere to coordination requirements with others at the site prior to, during and on completion of work activities and ensure briefings/handover details are communicated 
Place and tier tubular in appropriate racks 
Measure, label and record tubular 
Operate pneumatic and electric power tools 
Identify faults with equipment and repair or report to relevant personnel 
Assist winch operator as directed 
Assist in positioning blow out prevention equipment 
Assist crew by supplying tools to the drill floor as required 
Use approved safety approach 
Use correct lifting techniques 
Access and interpret safety data sheet 
Use correct manual handling techniques 
Use safety equipment correctly in event of personal contact with hazardous materials 

Forms

Assessment Cover Sheet

RIIOGN201E - Carry out rig lease operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIOGN201E - Carry out rig lease operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: