Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

TLIW3026A Mapping and Delivery Guide
Operate stand alone signalling/point control equipment

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency TLIW3026A - Operate stand alone signalling/point control equipment
Description This unit involves the skills and knowledge required to physically operate stand alone signalling/point control equipment on a rail network as a part of rail work activities, in accordance with legislative and regulatory requirements. It includes following policies, procedures and protocols of the access provider. Licensing or certification requirements are not applicable to this unit.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application Persons achieving competence in this unit will need to fulfil the legislated rail safety requirements including acts and regulations from the applicable state or territory together with any nationally approved compliance codes and/or guidelines.It involves the application of the access provider's policies, procedures and protocols related to applying rail safety requirements to work activities.Work is performed following established procedures, with accountability and responsibility for self and others in achieving the prescribed outcomes within the limits of responsibility of the worker concerned.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Not Applicable
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Use stand alone signalling control equipment
  • Signalling/point control equipment is identified and confirmed with network control officer
  • Authority to operate signalling/point control equipment is obtained from network control officer
  • Appropriate personal protective equipment (PPE) is worn in accordance with access provider's and organisational requirements
  • Track environment is accessed safely in accordance with workplace procedures
  • A situational awareness is maintained to identify any changed circumstances
  • Stand alone signalling control equipment is operated safely and in accordance with any local instructions
  • Route is set and confirmed as correct to facilitate safe rail vehicle movement
  • Communications with network control officer is maintained using appropriate communication protocols and systems in accordance with workplace procedures
  • Unsafe situations and/or emergencies are identified and appropriate action is taken in accordance with workplace procedures
       
Element: Restore stand alone signalling control equipment
  • Network control officer is informed when rail vehicle/s are clear of fouling points
  • Stand alone signalling/point control equipment is restored to correct position
  • Restoration is confirmed with network control officer
  • Where required, signalling/point control equipment is locked and secured in accordance with workplace procedures
  • Any identified faults in the equipment are reported in accordance with workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:

the underpinning knowledge and skills

relevant legislation and workplace procedures

other relevant aspects of the range statement

the timeframes typically expected for the work function and industrial environment

Compliance with site safety plans, OH&S regulations and other regulatory requirements

Assessment must include exercises which demonstrate competent performance of the following in a range of situations:

explaining procedures to maintain communication with network control officer

selecting and wearing appropriate personal protective equipment

correctly operating stand alone signalling and point control equipment

conducting a situational awareness

correctly restoring stand alone signalling and point control equipment

demonstrating locking and, where required, securing stand alone signalling control equipment in accordance with workplace procedures

Context of and specific resources for assessment

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Resources for assessment include:

a range of relevant exercises and/or other simulated practical and knowledge assessment, and/or

access to an appropriate range of relevant operational situations in the workplace

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment, and

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

Method of assessment

Assessment of this unit must be undertaken by a registered training organisation

Assessment of knowledge must be conducted through appropriate written/oral tests

Practical assessment must occur:

through activities in an appropriately simulated environment, and/or

in an appropriate range of situations in the workplace

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

REQUIRED KNOWLEDGE AND SKILLS

This describes the essential knowledge and skills and their level required for this unit.

Required knowledge:

Access provider's and organisational policies, procedures and protocols

Rail terminology as defined by the applicable access provider

Access provider's policies, procedures and protocols in the event of identified unsafe situations or emergencies within workplace role

Operational communication protocols and systems

Recognition of points, signals and location features

Required skills:

Communicate effectively with individuals and work groups

Follow workplace policies, procedures and protocols

Conduct a situational awareness assessment

Use required personal protective equipment conforming to organisational standards

Identify unsafe situations and emergencies

Operate points and signal controls

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Work locations may include:

rail corridor

danger zone:

running line

sidings/yards

platforms/buildings

Terminology will be:

as defined by the applicable track safeworking system and operating procedures

Work may occur:

by day or night, under varied weather conditions and situations

Situational awareness will be:

as defined within the workplace procedures

as defined in the risk assessment for situational awareness including:

view - line of sight

direction of approaching trains

speed of approaching trains

position of safety

changed local conditions

Network control officer may be:

network controller

train controller

area controller

signaller

Communications may include:

receive and pass on verbal messages/information

report unsafe situations and respond to emergencies

general safety and emergency messages

Communication protocols and systems may include:

general safety

transmitting and receiving messages:

identification

standard radio terms

phonetic alphabet

testing communications equipment

emergency messages

Safety clothing and equipment may include:

high visibility clothing

protective footwear

hearing protection

Rail vehicles may include:

trains

road/rail vehicles

track machines

Stand alone signalling equipment may include:

dual control point machines

ground frames

switchlocks

plunger lock points

small signal boxes

quadrant levers

master keys

tokens

Annett keys

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Signalling/point control equipment is identified and confirmed with network control officer 
Authority to operate signalling/point control equipment is obtained from network control officer 
Appropriate personal protective equipment (PPE) is worn in accordance with access provider's and organisational requirements 
Track environment is accessed safely in accordance with workplace procedures 
A situational awareness is maintained to identify any changed circumstances 
Stand alone signalling control equipment is operated safely and in accordance with any local instructions 
Route is set and confirmed as correct to facilitate safe rail vehicle movement 
Communications with network control officer is maintained using appropriate communication protocols and systems in accordance with workplace procedures 
Unsafe situations and/or emergencies are identified and appropriate action is taken in accordance with workplace procedures 
Network control officer is informed when rail vehicle/s are clear of fouling points 
Stand alone signalling/point control equipment is restored to correct position 
Restoration is confirmed with network control officer 
Where required, signalling/point control equipment is locked and secured in accordance with workplace procedures 
Any identified faults in the equipment are reported in accordance with workplace procedures 

Forms

Assessment Cover Sheet

TLIW3026A - Operate stand alone signalling/point control equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TLIW3026A - Operate stand alone signalling/point control equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: