Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEENEEJ176A Mapping and Delivery Guide
Install and commission hydrocarbon refrigeration systems, components and associated equipment
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEENEEJ176A - Install and commission hydrocarbon refrigeration systems, components and associated equipment |
---|---|---|---|
Description | 1) 1.1) This unit covers specialised procedures for the installation and commissioning of refrigeration equipment using Hydrocarbon as the refrigerant. It encompasses working safely and to installation standards matching equipment, location, components and piping to given specifications. After installation, to commission the complete system including: pre commissioning tests, starting the system, ensuring correct refrigerant charge, basic air or water balancing, adjusting components and controls to efficient operation. Completing all necessary installation and commissioning documentation. | ||
Employability Skills | 3)This unit contains Employability SkillsThe required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements. | ||
Learning Outcomes and Application | 4) This competency standard is suitable for employment-based programs under an approved contract of training at the AQF level of the qualification in which the unit is first packaged or higher.The unit may be selected as an elective from the relevant schedule (see qualification packaging rules) provided that all prerequisite units are undertaken or addressed through recognition processes.This unit may be included in a skill set provided that it is listed in the schedule of electives (see Qualification Framework) and all prerequisite units are undertaken or addressed through recognition processes.Delivery and assessment of this unit should be undertaken within regard to the requirements of License to Practice (1.2 above), Prerequisite Competencies and Literacy and Numeracy skills (2 above) and the recommendations for concurrent assessment and relationship with other units (9.5 below).Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships.Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control and lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting, risk safety measures etc. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | Prerequisite Unit(s)2) 2.1) CompetenciesGranting competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed.UEENEEJ113A Commission air conditioning and refrigeration systemsUEENEEJ174A Apply safety awareness and legal requirements for hydrocarbon refrigerantsUEENEEJ175A Service and repair self contained hydrocarbon air conditioning and refrigeration systemsUEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipmentUEENEEP017A Locate and rectify faults in low voltage composite appliances using set proceduresUEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplaceUEENEEE102A Fabricate, assemble and dismantle utilities industry componentsUEENEEE103A Solve problems in ELV single path circuitsUEENEEE105A Fix and secure electrotechnology equipmentUEENEEE107A Use drawings, diagrams, schedules, standards, codes and specificationsUEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology workUEENEEJ102A Prepare and connect refrigerant tubing and fittingsUEENEEJ103A Establish the basic operating conditions of vapour compression systemsUEENEEJ104A Establish the basic operating conditions of air conditioning systemsUEENEEJ106A Install refrigerant pipe work, flow controls and accessoriesUEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipmentUEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerantsUEENEEJ110A Select refrigerant piping, accessories and associated controlsUEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systemsUEENEEJ194A Solve problems in low voltage refrigeration circuitsUEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiringUEENEEP017A Locate and rectify faults in low voltage composite appliances using set proceduresand UEENEEJ174A Apply safety awareness and legal requirements for hydrocarbon refrigerantsand UEENEEJ155A Service refrigeration appliancesUEENEEJ054B Find and rectify faults in appliance motors and associated controlsUEENEEJ062B Find and rectify faults in appliance motors and associated controlsUEENEEJ102A Prepare and connect refrigerant tubing and fittingsUEENEEJ195A Establish the basic operating conditions of vapour compression systems - appliancesand UEENEEG006A Solve problems in single and three phase low voltage machinesUEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplaceUEENEEE102A Fabricate, assemble and dismantle utilities industry componentsUEENEEE104A Solve problems in d.c. circuitsUEENEEE105A Fix and secure electrotechnology equipmentUEENEEE107A Use drawings, diagrams, schedules, standards, codes and specificationsUEENEEG101A Solve problems in electromagnetic devices and related circuitsUEENEEG102A Solve problems in low voltage a.c. circuitsUEENEEG106A Terminate cables, cords and accessories for low voltage circuitsor UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systemsUEENEEE107A Use drawings, diagrams, schedules, standards, codes and specificationsUEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerantsUEENEEJ194A Solve problems in low voltage refrigeration circuitsUEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplaceUEENEEE103A Solve problems in ELV single path circuitsor UEENEEJ111A Diagnose and rectify faults in air conditioning and refrigeration systems and componentsUEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipmentUEENEEP017A Locate and rectify faults in low voltage composite appliances using set proceduresUEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplaceUEENEEE102A Fabricate, assemble and dismantle utilities industry componentsUEENEEE103A Solve problems in ELV single path circuitsUEENEEE105A Fix and secure electrotechnology equipmentUEENEEE107A Use drawings, diagrams, schedules, standards, codes and specificationsUEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology workUEENEEJ102A Prepare and connect refrigerant tubing and fittingsUEENEEJ103A Establish the basic operating conditions of vapour compression systemsUEENEEJ104A Establish the basic operating conditions of air conditioning systemsUEENEEJ106A Install refrigerant pipe work, flow controls and accessoriesUEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipmentUEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerantsUEENEEJ110A Select refrigerant piping, accessories and associated controlsUEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systemsUEENEEJ194A Solve problems in low voltage refrigeration circuitsUEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiringNote: UEENEEJ113A - Those holding a 'Certificate III in Refrigeration and Air Conditioning trade qualification or equivalent" meet the requirements of these units and their pre-requisite requirements. | ||
Competency Field | 2.2) Literacy and numeracy skillsParticipants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 'Literacy and Numeracy' Reading 4 Writing 4 Numeracy 4 |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare to install and commission Hydrocarbon refrigeration systems |
| |||||||
Element: Install Hydrocarbon refrigeration systems. |
| |||||||
Element: Commission Hydrocarbon systems |
| |||||||
Element: Complete installation and commissioning work |
|