Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEERL0003 Mapping and Delivery Guide
Conduct in-service safety testing of electrical cord connected equipment and cord assemblies

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEERL0003 - Conduct in-service safety testing of electrical cord connected equipment and cord assemblies
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to conduct in-service safety testing of electrical cord connected equipment and cord assemblies.It includes working safely, using portable appliance tester (PAT), identifying faults, applying tagging, arranging for repair of faulty equipment and complete testing documentation.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in suitable workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated suitable workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

relevant and appropriate materials, tools, facilities. equipment and personal protective equipment (PPE) currently used in industry

resources that reflect current industry practices in relation to conducting in-service safety testing of electrical cord connected equipment and cord assemblies

applicable documentation, including workplace procedures, equipment specifications, regulations, codes of practice and operation manuals.
Prerequisites/co-requisites
Competency Field Restricted Licensing
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to test cord connected apparatus and cord assemblies
  • Work health and safety (WHS)/occupational health and safety (OHS) procedures for a given work area are identified, obtained and applied
       
Element: WHS/OHS risk control work preparation measures and procedures are followed
       
Element: Advice is sought from relevant person/s to ensure work is effectively coordinated with others
       
Element: Cord connected apparatus and cord assemblies to be tested are obtained in accordance with workplace procedures
       
Element: PAT device is checked for correct operation and safety in accordance with relevant industry standards and workplace procedures
       
Element: Test cord connected apparatus and cord assemblies
  • WHS/OHS risk control work measures and procedures are followed
       
Element: Measures are followed to ensure that cord connected apparatus and cord assemblies to be tested are not connected to the electrical supply in accordance with relevant industry standards
       
Element: Electrical safety requirements and parameters are applied to ensure correct test results are in accordance with relevant industry standards
       
Element: Visual inspection and checks of the cord connected apparatus and cord assemblies are carried out in accordance with workplace procedures to detect any abnormal damage or fault
       
Element: Approval is obtained in accordance with workplace procedures from relevant person/s before any contingencies are implemented
       
Element: PAT routines are followed to test cord connected apparatus and cord assemblies in accordance with workplace procedures
       
Element: Unsafe cord connected apparatus and cord assemblies are identified from test results in accordance with workplace procedures
       
Element: Testing is undertaken effectively to minimise waste of energy and damage to apparatus
       
Element: Tag cord connected apparatus and cord assemblies and document testing activities
  • WHS/OHS work completion risk control measures and procedures are followed
       
Element: Worksite is cleaned and made safe in accordance with workplace procedures
       
Element: Cord connected apparatus and cord assemblies are tagged in accordance with workplace procedures for their safety status
       
Element: Arrangements are made for unsafe cord connected apparatus and cord assemblies to be repaired by relevant person/s
       
Element: Safety testing activities are documented in accordance with relevant industry standards and workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying appropriate tagging

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including using risk control measures

connecting cords and apparatus to the testing device

dealing with unplanned events in accordance with problem-solving techniques and workplace procedures

documenting testing activities, including workplace register

identifying safe and unsafe cords and apparatus

preparing to test cord connected apparatus and cord assemblies

preparing and using the portable appliance tester (PAT)

safety testing of electrical cord connected equipment and cord assemblies

tagging tested cord connected apparatus and cord assemblies and document testing activities

using test results to determine the safety status.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

Australian Standards and Commonwealth/state/territory legislation and regulations including:

Australian Standard AS/NZS 3760 In-service safety inspection and testing of electrical equipment

Commonwealth/state/territory WHS/OHS Acts and regulations

limitations of work that can be undertaken

codes of practice and associated guidance material

risk management principles

basic electrical testing concepts, including:

basic electrical circuits

functions of electrical circuit

conductors and insulators

basic electrical supply system

relationship of electrical quantities

effects of electrical currents

methods/devices used to negate or minimise electrical shock

PAT

PAT maintenance and calibration

electrical equipment and cord assemblies testing, including:

classification of electrical equipment

inspection of electrical equipment (visual inspections)

using PAT:

earth continuity testing

insulation resistance testing

polarity testing (extension cords and IEC cords)

testing and tagging documentation requirements, including:

risk assessment documentation

frequency of inspection and testing

tagging of equipment

records maintenance

electrical cord testing and tagging documentation requirements

electrical equipment and cord assemblies testing

electrical testing concepts

problem-solving techniques

relevant job safety assessments or risk mitigation processes

relevant legislation and regulations

relevant manufacturer specifications

relevant testing and tagging of portable and cord connected electrical apparatus

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace policies and procedures.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

In-service safety testing must include the following:

at least two different electrical cords and three different items of cord connected equipment with safety faults, including:

a device containing an element

a device containing a motor

a device containing metal oxide varistors (MOV)

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS)/occupational health and safety (OHS) procedures for a given work area are identified, obtained and applied 
 
 
 
 
WHS/OHS risk control work measures and procedures are followed 
 
 
 
 
 
 
 
WHS/OHS work completion risk control measures and procedures are followed 
 
 
 
 

Forms

Assessment Cover Sheet

UEERL0003 - Conduct in-service safety testing of electrical cord connected equipment and cord assemblies
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEERL0003 - Conduct in-service safety testing of electrical cord connected equipment and cord assemblies

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: