Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPMNT302 Mapping and Delivery Guide
Install and maintain industrial pipe work

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPMNT302 - Install and maintain industrial pipe work
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to undertake work associated with the installation, maintenance and fabrication of industrial pipe work, which may also involve fault finding and repairs.Industrial piping is used to convey fluids, liquids and gases from one location to another. Pipe fabrication is the process of making and assembling industrial pipe work to suit each power generation facility's requirements. Competency in this unit requires the ability to plan work, fabricate and install industrial pipe work, maintain industrial pipe work and to report on all completed work tasks. Individuals will, in general, work under supervision in an electrical, electronic and/or mechanical equipment repair workshop or no site Power generation maintenance personnel are typically trained and authorised to receive permits to work. No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Maintenance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Complete work
  • Work is completed, and appropriate personnel notified, in accordance with workplace procedures
  • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
  • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
  • Work completion details are finalised, in accordance with workplace procedures
       
Element: Plan and prepare for work
  • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
       
Element: Occupational Health and Safety (OHS)/Work, Health and Safety (WHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
       
Element: Resources are obtained and inspected for compliance with job specification
       
Element: Relevant plans, drawings and manuals are selected and used, in accordance with the work procedures
       
Element: Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
       
Element: Work is planned, sequenced and prioritised, in accordance with workplace
       
Element: Potential hazards are identified, and risk control measures, are selected and implemented, in accordance with workplace procedures
       
Element: Work area is prepared, in accordance with workplace procedures
       
Element: Fabricate and install pipe work
  • Isolations are confirmed, where appropriate, in accordance with workplace procedures
       
Element: Pipe runs are identified, calculations performed and sketches made of planned installation in accordance with workplace procedures
       
Element: Pipe work is fabricated, using appropriate techniques and equipment, in accordance with workplace procedures
       
Element: Pipe work is levelled and aligned, and installed or coupled, in accordance with the workplace procedures
       
Element: Maintain industrial pipework
  • Pipe work found to be faulty is repaired and replaced to conform to site requirements or manufacturers' specifications, in accordance with workplace procedures
       
Element: Pipe work modifications and alterations are undertaken, in accordance with workplace procedures, site requirements and manufacturers' specifications
       
Element: Machinery and/or plant is returned to service, and pipe work is monitored and adjusted, in accordance with workplace procedures
  • Work is completed, and appropriate personnel notified, in accordance with workplace procedures
       
Element: Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
       
Element: Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
       
Element: Work completion details are finalised, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work is completed, and appropriate personnel notified, in accordance with workplace procedures 
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures 
Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures 
Work completion details are finalised, in accordance with workplace procedures 
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures 
 
 
 
 
 
 
 
Isolations are confirmed, where appropriate, in accordance with workplace procedures 
 
 
 
Pipe work found to be faulty is repaired and replaced to conform to site requirements or manufacturers' specifications, in accordance with workplace procedures 
 
Work is completed, and appropriate personnel notified, in accordance with workplace procedures 
 
 
 

Forms

Assessment Cover Sheet

UEPMNT302 - Install and maintain industrial pipe work
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPMNT302 - Install and maintain industrial pipe work

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: