Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPMNT305 Mapping and Delivery Guide
Maintain industrial fans

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPMNT305 - Maintain industrial fans
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to maintain and/or overhaul industrial fans. It may involve fault finding, diagnosis, repair and may require the removal and replacement of rotating elements with modulating controls.Industrial fanstypically provide a large flow of air or gas to power or cool a power generation facility's plant and equipment. The diagnosis and repair of faults requires the systematic investigation of any industrial fan malfunction.Competency in this unit requires the ability to plan work, remove industrial fans for maintenance, maintain industrial fans, replace and/or install industrial fans and to report on all completed work tasks. Individuals will, in general, work under supervision in an electrical, electronic and/or mechanical equipment repair workshop or on site.Power generation maintenance personnel are typically trained and authorised to receive permits to work. No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Maintenance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Complete work
  • Work is completed, and appropriate personnel are notified, in accordance with workplace procedures
  • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
  • Tools and equipment are maintained and stored, in accordance with workplace procedures
  • Work completion details are finalised, in accordance with workplace procedures
       
Element: Plan and prepare for work
  • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
       
Element: Occupational Health and Safety(OHS)/Work, Health and Safety (WHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are reviewed in preparation for work
       
Element: Resources for work activities are obtained and inspected for compliance with job specification
       
Element: Relevant plans, drawings and manuals are selected and used, in accordance with the workplace procedures
       
Element: Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
       
Element: Work is planned, sequenced and prioritised, in accordance with workplace procedures
       
Element: Potential hazards are identified, and risk control measures are selected and implemented, in accordance with workplace procedures
       
Element: Work area is prepared, in accordance with workplace procedures
       
Element: Remove industrialfan for maintenance
  • Isolations are confirmed, where appropriate, in accordance with workplace procedures
       
Element: Industrial fans are disconnected, in accordance with workplace procedures
       
Element: Industrial fans are removed, in a manner which will assist in replacement, in accordance with workplace procedures
       
Element: Industrial fans are inspected for abnormalities, in accordance with workplace procedures
       
Element: Maintain industrial fans
  • Maintenance is performed on industrial fans, in accordance with manufacturers' specification and workplace procedures
       
Element: Components are disassembled or assembled and preliminary balance of equipment is obtained, maintained and adjusted by assembling components of an appropriate weight, in accordance with workplace procedures and manufacturers' specification
       
Element: Sketches are made, data noted and components are marked for identification or reassembly, in accordance with workplace procedures
       
Element: New components are obtained and inspected for compliance with manufacturers' specification, in accordance with workplace procedures
       
Element: Dimensional inspection is performed with precision measuring devices to ensure compliance with manufacturers' specifications and results are recorded, in accordance with workplace procedures
       
Element: Industrial fans are reassembled, applying appropriate principles and techniques, in accordance with workplace procedures and manufacturers' specifications
       
Element: Modifications or alterations to industrial fans are undertaken, in accordance with workplace procedures
       
Element: Replaceorinstall industrialfans
  • Equipment is prepared for industrial fan replacement, in accordance with workplace procedures
       
Element: Industrial fans are replaced, in accordance with workplace procedures and manufacturers' specification
       
Element: Industrial fans are levelled, aligned, coupled and connected, in accordance with workplace procedures
       
Element: All fastenings are torqued, in accordance with workplace procedures and manufacturers' specification
       
Element: Machinery, plant and industrial fans are given a test run, monitored and adjusted, as required, in accordance with workplace procedures and manufacturers' specification
  • Work is completed, and appropriate personnel are notified, in accordance with workplace procedures
       
Element: Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
       
Element: Tools and equipment are maintained and stored, in accordance with workplace procedures
       
Element: Work completion details are finalised, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work is completed, and appropriate personnel are notified, in accordance with workplace procedures 
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures 
Tools and equipment are maintained and stored, in accordance with workplace procedures 
Work completion details are finalised, in accordance with workplace procedures 
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures 
 
 
 
 
 
 
 
Isolations are confirmed, where appropriate, in accordance with workplace procedures 
 
 
 
Maintenance is performed on industrial fans, in accordance with manufacturers' specification and workplace procedures 
 
 
 
 
 
 
Equipment is prepared for industrial fan replacement, in accordance with workplace procedures 
 
 
 
Work is completed, and appropriate personnel are notified, in accordance with workplace procedures 
 
 
 

Forms

Assessment Cover Sheet

UEPMNT305 - Maintain industrial fans
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPMNT305 - Maintain industrial fans

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: