Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPMNT318 Mapping and Delivery Guide
Conduct generator mechanical maintenance

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPMNT318 - Conduct generator mechanical maintenance
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to conduct mechanical maintenance on an electrical generating unit.A power generation facility typically maintains several independent generating units which can be brought online or taken offline as demand fluctuates in the system. Regular maintenance ensures that all electrical generating units are operating to maximum efficiency. Competency in this unit requires the ability to plan work, remove associated equipment, perform generator maintenance, replace generator associated equipment and to report on all completed work tasks. Individuals will, in general, work under supervision in an electrical, electronic, and/or mechanical equipment repair workshop or on site.Power generation maintenance personnel are typically trained and authorised to receive permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Maintenance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Complete work
  • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
  • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
  • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
  • Work completion details are finalised, in accordance with workplace procedures
       
Element: Plan and prepare for work
  • Requirements including scope of work and assigned tasks are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
       
Element: Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
       
Element: Resources are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
       
Element: Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
       
Element: Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
       
Element: Work is planned, sequenced and prioritised, in accordance with workplace procedures
       
Element: Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
       
Element: Work area is prepared, in accordance with workplace procedures
       
Element: Remove associated equipment
  • Work notations are confirmed, in accordance with workplace procedures
       
Element: Associated generator equipment is disconnected, in accordance with workplace procedures
       
Element: Associated generator equipment is removed, in accordance with workplace procedures
       
Element: Associated generator equipment is inspected for abnormalities, in accordance with workplace procedures
       
Element: Perform generator maintenance
  • Generator maintenance is performed, in accordance with workplace procedures and manufacturers' specification
       
Element: Generator is dismantled, clearly marked for identification and relevant data or sketches are noted or drawn, in accordance with workplace procedures
       
Element: Components are prepared for reassembly, in accordance with manufacturers' drawings or manuals and workplace procedures
       
Element: New components are inspected, in accordance with workplace procedures, to ensure compliance with manufacturers' specification
       
Element: Dimensional inspection is performed, in accordance with workplace procedures, on generator and components to ensure compliance with manufacturers' specifications
       
Element: Components are reassembled for testing, in accordance with workplace procedures and manufacturers' specification
       
Element: Components are levelled, aligned and coupled, in accordance with workplace procedures and manufacturers' specification
       
Element: Replace generator associated equipment
  • Associated generator equipment is replaced and connected, in accordance with workplace procedures
       
Element: Generator is rotated and checks are carried out, in accordance with workplace procedures, to ensure operating conditions are in accordance with manufacturers' specifications
       
Element: Modifications outside of manufacturers' specifications are approved by appropriate personnel and are documented, in accordance with workplace procedures
       
Element: Final inspection is completed, in accordance with workplace procedures
  • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
       
Element: Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
       
Element: Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
       
Element: Work completion details are finalised, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work is completed and appropriate personnel are notified, in accordance with workplace procedures 
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures 
Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures 
Work completion details are finalised, in accordance with workplace procedures 
Requirements including scope of work and assigned tasks are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures 
 
 
 
 
 
 
 
Work notations are confirmed, in accordance with workplace procedures 
 
 
 
Generator maintenance is performed, in accordance with workplace procedures and manufacturers' specification 
 
 
 
 
 
 
Associated generator equipment is replaced and connected, in accordance with workplace procedures 
 
 
Work is completed and appropriate personnel are notified, in accordance with workplace procedures 
 
 
 

Forms

Assessment Cover Sheet

UEPMNT318 - Conduct generator mechanical maintenance
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPMNT318 - Conduct generator mechanical maintenance

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: