Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPMNT402 Mapping and Delivery Guide
Conduct complex levelling and alignment

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPMNT402 - Conduct complex levelling and alignment
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to conduct levelling and the advanced alignment of power generation plant and machinery, this may include high speed rotating plant.Levellingis the process in which differences in height between two or more points are determined. Alignmentis placing or arranging in a straight line, this can include adjusting parts of a mechanism to produce a required relationship or orientation.Competency in this unit requires the ability to plan and prepare work, perform alignments andcomplete all work tasks. Individuals will, in general, work as a maintenance operative in a power generation facility. Power generation maintenance personnel are typically trained and authorised to receive permits to work. No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Maintenance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Perform alignment
  • Isolations for work are confirmed, in accordance with workplace procedures
  • Measurements are taken, and recorded, to facilitate compliance with manufacturers' specifications and job requirements
  • Levelling and alignment calculations are performed, and sketches are made, in accordance with workplace procedures
  • Power generation plant and machinery is levelled and aligned, and adjustments are made, in accordance with workplace procedures, to ensure compliance with manufacturers' specifications
  • Final alignment inspections are undertaken, and fastenings are torqued, in accordance with workplace procedures and manufacturers' specifications
  • Power generation plant and machinery is test run, monitored and adjusted, in accordance with workplace procedures and manufacturers' specifications
       
Element: Complete work
  • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
  • Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
  • Tools and equipment are maintained and stored in accordance with workplace procedures
  • Work completion details are finalised, in accordance with workplace procedures
       
Element: Plan and prepare for work
  • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
       
Element: Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
       
Element: Resources are obtained and inspected, in accordance with workplace procedures for compliance with job specification
       
Element: Relevant plans, drawings and manual are selected and used, in accordance with workplace procedures
       
Element: Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with the job specification
       
Element: Work is planned, sequenced and prioritised, in accordance with workplace procedures
       
Element: Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
       
Element: Work area is prepared, in accordance with workplace procedures
  • Isolations for work are confirmed, in accordance with workplace procedures
       
Element: Measurements are taken, and recorded, to facilitate compliance with manufacturers' specifications and job requirements
       
Element: Levelling and alignment calculations are performed, and sketches are made, in accordance with workplace procedures
       
Element: Power generation plant and machinery is levelled and aligned, and adjustments are made, in accordance with workplace procedures, to ensure compliance with manufacturers' specifications
       
Element: Final alignment inspections are undertaken, and fastenings are torqued, in accordance with workplace procedures and manufacturers' specifications
       
Element: Power generation plant and machinery is test run, monitored and adjusted, in accordance with workplace procedures and manufacturers' specifications
  • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
       
Element: Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
       
Element: Tools and equipment are maintained and stored in accordance with workplace procedures
       
Element: Work completion details are finalised, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Isolations for work are confirmed, in accordance with workplace procedures 
Measurements are taken, and recorded, to facilitate compliance with manufacturers' specifications and job requirements 
Levelling and alignment calculations are performed, and sketches are made, in accordance with workplace procedures 
Power generation plant and machinery is levelled and aligned, and adjustments are made, in accordance with workplace procedures, to ensure compliance with manufacturers' specifications 
Final alignment inspections are undertaken, and fastenings are torqued, in accordance with workplace procedures and manufacturers' specifications 
Power generation plant and machinery is test run, monitored and adjusted, in accordance with workplace procedures and manufacturers' specifications 
Work is completed and appropriate personnel are notified, in accordance with workplace procedures 
Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures 
Tools and equipment are maintained and stored in accordance with workplace procedures 
Work completion details are finalised, in accordance with workplace procedures 
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures 
 
 
 
 
 
 
Isolations for work are confirmed, in accordance with workplace procedures 
 
 
 
 
Work is completed and appropriate personnel are notified, in accordance with workplace procedures 
 
 
 

Forms

Assessment Cover Sheet

UEPMNT402 - Conduct complex levelling and alignment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPMNT402 - Conduct complex levelling and alignment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: