Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPMNT406 Mapping and Delivery Guide
Install and maintain a steam turbine

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPMNT406 - Install and maintain a steam turbine
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to install High Pressure (HP), Intermediate Pressure (IP), Low Pressure (LP) and Steam Driven Feed Pump Turbine (SFPT) cylinders, rotors and steam units. Installation is the process of making cylinders, rotors and steam units ready for use in a power generation facility. Maintenance includes the use of strategies and procedures to preserve and extend the service life of the steam turbine. Competency in this unit requires the ability to plan work, disassemble steam turbine, inspect steam turbine components, repair steam turbine and components,reassemble steam turbine and complete all work tasks. Individuals will, in general, work under supervision in an electrical, electronic and/or mechanical equipment repair workshop or on site. Power generation maintenance personnel are typically trained and authorised to receive permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Maintenance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Complete work
  • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
  • Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
  • Tools and equipment are maintained and stored, in accordance with workplace procedures
  • Work completion details are finalised, in accordance with workplace procedures
       
Element: Plan and prepare forwork
  • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
       
Element: Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are reviewed in preparation for work
       
Element: Resources are obtained and inspected for compliance with job specifications
       
Element: Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
       
Element: Correct materials and components for work are obtained and inspected for compliance with job specifications
       
Element: Work is planned, sequenced and prioritised, in accordance with workplace procedures
       
Element: Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
       
Element: Work area is prepared, in accordance with workplace procedures
       
Element: Disassemblesteam turbine
  • Isolations for work are confirmed, in accordance with workplace procedures
       
Element: Steam turbine is disassembled, in accordance with manufacturers' specifications and workplace procedures
       
Element: Steam turbine components are removed, in priority, in accordance with manufacturers' specifications and workplace procedures
       
Element: Disassembly is carried out to facilitate reassembly, in accordance with workplace procedures
       
Element: Components are measured and clearances are taken to determine conformity to manufacturer’s limits and to ensure assembly is in accordance with manufacturers' specifications and workplace procedures
       
Element: Measurements and clearances are recorded, in accordance with workplace procedures and manufacturers' specifications
       
Element: Inspect steamturbine components
  • Components are cleaned and inspected, in accordance with workplace procedures
       
Element: Faults are identified and recorded, in accordance with workplace procedures
       
Element: New components are inspected for compliance to manufacturers' specifications, in accordance with workplace procedures
       
Element: New components are prepared for assembly, in accordance with workplace procedures plan
       
Element: Repair steam turbinecomponents
  • Repairs are carried out in accordance with workplace procedures
       
Element: Repairs are tested and results are analysed to ensure conformance to manufacturers' specifications, in accordance with workplace procedures
       
Element: Data from testing is recorded, in accordance with workplace procedures
       
Element: Reassemble steamturbine
  • Equipment and plant is prepared for reassembly of steam turbine, in accordance with workplace procedures
       
Element: Components are refitted, in accordance with workplace procedures and manufacturers' specifications
       
Element: Steam turbine is assembled, in accordance with workplace procedures and manufacturers' specifications
       
Element: Steam turbine is test run and operating characteristics are monitored to ensure compliance with manufacturers specifications and workplace procedures and requirements
  • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
       
Element: Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
       
Element: Tools and equipment are maintained and stored, in accordance with workplace procedures
       
Element: Work completion details are finalised, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work is completed and appropriate personnel are notified, in accordance with workplace procedures 
Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures 
Tools and equipment are maintained and stored, in accordance with workplace procedures 
Work completion details are finalised, in accordance with workplace procedures 
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures 
 
 
 
 
 
 
 
Isolations for work are confirmed, in accordance with workplace procedures 
 
 
 
 
 
Components are cleaned and inspected, in accordance with workplace procedures 
 
 
 
Repairs are carried out in accordance with workplace procedures 
 
 
Equipment and plant is prepared for reassembly of steam turbine, in accordance with workplace procedures 
 
 
Work is completed and appropriate personnel are notified, in accordance with workplace procedures 
 
 
 

Forms

Assessment Cover Sheet

UEPMNT406 - Install and maintain a steam turbine
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPMNT406 - Install and maintain a steam turbine

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: