Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPMNT411 Mapping and Delivery Guide
Diagnose and repair faults in complex electrical equipment

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPMNT411 - Diagnose and repair faults in complex electrical equipment
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to diagnose and repair faults in complex and High Voltage (H.V.) electrical equipment, this may involve work being carried out with equipment online.Diagnosing and repairing faults includes the inspection, testing and verification of the operation and reliability of complex and H.V. electrical equipment used in a power generation facility.Competency in this unit requires the ability to plan work, verify complex electrical equipment faults, find complex electrical equipment faults, determine cause of complex electrical equipment fault, repair complex electrical equipment fault and to report on all completed work tasks. Individuals will, in general, work under supervision in an electrical, electronic and/or mechanical equipment repair workshop or on site. Power generation maintenance personnel are typically trained and authorised to receive permits to work. No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Maintenance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Complete work
  • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
  • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
  • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
  • Work completion details are finalised, in accordance with workplace procedures
       
Element: Plan and prepare forwork
  • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
       
Element: Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
       
Element: Resources are obtained and inspected for compliance with job specification
       
Element: Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
       
Element: Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
       
Element: Work is planned, sequenced and prioritised, in accordance with workplace procedures
       
Element: Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
       
Element: Work area is prepared, in accordance with workplace procedures
       
Element: Diagnose complex electricalfault
  • Normal performance and function of complex and High Voltage electrical equipment is reviewed, in accordance with workplace procedures
       
Element: Complex and High Voltage electrical equipment fault indicators and technical information are used, in accordance with workplace procedures, to diagnose and verify reported faults
       
Element: Complex and High Voltage electrical equipment symptoms are reproduced and monitored, if possible, in accordance with workplace procedures
       
Element: Find complex electrical equipmentfault
  • Isolations for work are confirmed, where appropriate, in accordance with workplace procedures
       
Element: Complex electrical equipment components, wires, cables, terminations and support fixings are inspected, in accordance with workplace procedures, for faults
       
Element: Diagnostic techniques are selected and used to determine complex electrical equipment faults, in accordance with workplace procedures
       
Element: Components are disconnected, in accordance with workplace procedures, to enable test measurements of suspected faulty components whilst ensuring no back feed readings occur
       
Element: Test and measurement instruments are used, in accordance with workplace procedures and manufacturers' specifications
       
Element: Determine cause of complex electrical equipmentfault
  • Appropriate personnel are consulted, if required, in accordance with workplace procedures
       
Element: Information from fault indicators and maintenance records are used, in accordance with workplace procedures
       
Element: Conclusions about the nature and cause of the fault from analysis of evidence is undertaken, in accordance with workplace procedures
       
Element: Repair complex electrical equipment fault
  • Faulty, worn or damaged complex electrical equipment components are repaired, in accordance with workplace procedures
       
Element: Complex electrical equipment components disconnected for testing are reconnected, in accordance with workplace procedures, with terminations checked to ensure they are electrically and mechanically sound
       
Element: All faults are repaired, in accordance with workplace procedures
       
Element: Final inspection of complex electrical equipment is performed, in accordance with workplace procedures
  • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
       
Element: Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
       
Element: Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
       
Element: Work completion details are finalised, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work is completed and appropriate personnel are notified, in accordance with workplace procedures 
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures 
Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures 
Work completion details are finalised, in accordance with workplace procedures 
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures 
 
 
 
 
 
 
 
Normal performance and function of complex and High Voltage electrical equipment is reviewed, in accordance with workplace procedures 
 
 
Isolations for work are confirmed, where appropriate, in accordance with workplace procedures 
 
 
 
 
Appropriate personnel are consulted, if required, in accordance with workplace procedures 
 
 
Faulty, worn or damaged complex electrical equipment components are repaired, in accordance with workplace procedures 
 
 
Work is completed and appropriate personnel are notified, in accordance with workplace procedures 
 
 
 

Forms

Assessment Cover Sheet

UEPMNT411 - Diagnose and repair faults in complex electrical equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPMNT411 - Diagnose and repair faults in complex electrical equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: