Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPMNT436 Mapping and Delivery Guide
Test and commission wind turbine control systems

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPMNT436 - Test and commission wind turbine control systems
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to conduct testing and commissioning of wind turbine control systems.Commissioning and testing is the process of ensuring that all aspects of the wind turbine control system which directs and regulates the behaviour of equipment, devices and systems is working efficiently and is meeting operational requirements.Competency in this unit requires the ability to plan work, test wind turbine control system equipment, test wind turbine control system, commission wind turbine control system and complete all work tasks. Individuals will, in general, work under supervision in an electrical, electronic and/or mechanical equipment repair workshop or on site. Power generation maintenance personnel are typically trained and authorised to receive permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Maintenance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Test system
  • Isolations are confirmed, where appropriate, in accordance with workplace procedures
  • Wind turbine control system is visually inspected to ensure absence of any damage, defects or deterioration, in accordance with workplace procedures and commissioning plan
  • Wind turbine control system is tested using appropriate plans, drawings and manuals, in accordance with workplace procedures and commissioning plan
  • Wind turbine control system is tested, in conjunction with other related systems and equipment, in accordance with workplace procedures and commissioning plan
  • Wind turbine control system test results are interpreted and documented, in accordance with workplace procedures, to confirm compliance with commissioning plan
       
Element: Commission system
  • Isolations are confirmed, where appropriate, in accordance with workplace procedures
  • Wind turbine control system plant and equipment is set up, in accordance with workplace procedures, to meet operational requirements and manufacturers' specifications
  • Wind turbine control system is set up, in accordance with workplace procedures, to meet operational requirements and manufacturers' specifications
  • Wind turbine control system plans, drawings and manuals are used, in accordance with workplace procedures and commissioning plan
  • Wind turbine control system equipment is commissioned, in accordance with workplace procedures and commissioning plan
  • Faulty wind turbine control system equipment is repaired, or reported, in accordance with workplace procedures
  • Final inspection is carried out, in accordance with workplace procedures
       
Element: Complete work
  • Wind turbine control system commissioning is completed, and appropriate personnel are notified, in accordance with workplace procedures
  • Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
  • Tools and equipment are maintained and stored, in accordance with workplace procedures
  • Work completion details are finalised in accordance with workplace procedures
       
Element: Plan and prepare for work
  • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
       
Element: Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
       
Element: Resources are obtained and inspected for compliance with job specification
       
Element: Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
       
Element: Correct materials and components for work are obtained and inspected for compliance with job specification
       
Element: Plan for commissioning of wind turbine control system is developed, in accordance with workplace procedures, including sequencing and prioritising
       
Element: Potential hazards are identified and risk control measures are implemented, in accordance with workplace procedures
       
Element: Work area is prepared in accordance with workplace procedures
       
Element: Test systems equipment
  • Isolations are confirmed, where appropriate, in accordance with workplace procedures
       
Element: Wind turbine control system equipment is visually inspected to ensure absence of any damage, defects or deterioration, in accordance with workplace procedures and commissioning plan
       
Element: Wind turbine control system equipment is tested, in conjunction with other related systems and equipment, to ensure correct operation, in accordance with workplace procedures and commissioning plan
       
Element: Wind turbine control system wiring system is checked and tested, in conjunction with other related systems and equipment, in accordance with workplace procedures and commissioning plan
  • Isolations are confirmed, where appropriate, in accordance with workplace procedures
       
Element: Wind turbine control system is visually inspected to ensure absence of any damage, defects or deterioration, in accordance with workplace procedures and commissioning plan
       
Element: Wind turbine control system is tested using appropriate plans, drawings and manuals, in accordance with workplace procedures and commissioning plan
       
Element: Wind turbine control system is tested, in conjunction with other related systems and equipment, in accordance with workplace procedures and commissioning plan
       
Element: Wind turbine control system test results are interpreted and documented, in accordance with workplace procedures, to confirm compliance with commissioning plan
  • Isolations are confirmed, where appropriate, in accordance with workplace procedures
       
Element: Wind turbine control system plant and equipment is set up, in accordance with workplace procedures, to meet operational requirements and manufacturers' specifications
       
Element: Wind turbine control system is set up, in accordance with workplace procedures, to meet operational requirements and manufacturers' specifications
       
Element: Wind turbine control system plans, drawings and manuals are used, in accordance with workplace procedures and commissioning plan
       
Element: Wind turbine control system equipment is commissioned, in accordance with workplace procedures and commissioning plan
       
Element: Faulty wind turbine control system equipment is repaired, or reported, in accordance with workplace procedures
       
Element: Final inspection is carried out, in accordance with workplace procedures
  • Wind turbine control system commissioning is completed, and appropriate personnel are notified, in accordance with workplace procedures
       
Element: Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
       
Element: Tools and equipment are maintained and stored, in accordance with workplace procedures
       
Element: Work completion details are finalised in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Isolations are confirmed, where appropriate, in accordance with workplace procedures 
Wind turbine control system is visually inspected to ensure absence of any damage, defects or deterioration, in accordance with workplace procedures and commissioning plan 
Wind turbine control system is tested using appropriate plans, drawings and manuals, in accordance with workplace procedures and commissioning plan 
Wind turbine control system is tested, in conjunction with other related systems and equipment, in accordance with workplace procedures and commissioning plan 
Wind turbine control system test results are interpreted and documented, in accordance with workplace procedures, to confirm compliance with commissioning plan 
Isolations are confirmed, where appropriate, in accordance with workplace procedures 
Wind turbine control system plant and equipment is set up, in accordance with workplace procedures, to meet operational requirements and manufacturers' specifications 
Wind turbine control system is set up, in accordance with workplace procedures, to meet operational requirements and manufacturers' specifications 
Wind turbine control system plans, drawings and manuals are used, in accordance with workplace procedures and commissioning plan 
Wind turbine control system equipment is commissioned, in accordance with workplace procedures and commissioning plan 
Faulty wind turbine control system equipment is repaired, or reported, in accordance with workplace procedures 
Final inspection is carried out, in accordance with workplace procedures 
Wind turbine control system commissioning is completed, and appropriate personnel are notified, in accordance with workplace procedures 
Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures 
Tools and equipment are maintained and stored, in accordance with workplace procedures 
Work completion details are finalised in accordance with workplace procedures 
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures 
 
 
 
 
 
 
 
Isolations are confirmed, where appropriate, in accordance with workplace procedures 
 
 
Isolations are confirmed, where appropriate, in accordance with workplace procedures 
 
 
 
Isolations are confirmed, where appropriate, in accordance with workplace procedures 
 
 
 
 
 
Wind turbine control system commissioning is completed, and appropriate personnel are notified, in accordance with workplace procedures 
 
 
 

Forms

Assessment Cover Sheet

UEPMNT436 - Test and commission wind turbine control systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPMNT436 - Test and commission wind turbine control systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: