Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPOPS339 Mapping and Delivery Guide
Operate and monitor a boiler unit

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPOPS339 - Operate and monitor a boiler unit
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to operate and monitor an in-service boiler unit capable of supplying steam.Boilersare used to createsteamby applyingheat towater, the steam expands and turns the turbines and these in turn drive the generators in power generation facilities.Competency in this unit requires the ability to plan work, operate boiler unit plant, test boiler unit plant, analyse boiler unit plant faults, monitor and inspect boiler unit and complete all documentation. Individuals will, in general, work under supervision, in a power generation facility as an operator.Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication. Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Operations
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare work
  • Safety issues related to operating and monitoring boiler unit plant are identified, in accordance with workplace procedures and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations and legislative requirements
  • Work requirements are identified, in accordance with workplace procedures, from relevant personnel and documentation
  • Preoperational checks are carried out on boiler unit plant, in accordance with workplace procedures, manufacturers' recommendations and site requirements
       
Element: Work requirements are identified, in accordance with workplace procedures, from relevant personnel and documentation
       
Element: Preoperational checks are carried out on boiler unit plant, in accordance with workplace procedures, manufacturers' recommendations and site requirements
       
Element: Operate boiler unitplant
  • Combustion is established and fuel consumption at minimum levels is supported, in accordance with workplace procedures, manufacturers' recommendations and site requirements
       
Element: Fuel and air feed flows are adjusted to achieve required steam conditions and demand, in accordance with workplace procedures, and observation of operating requirements
       
Element: Boiler unit plant is operated within the limits of its' design, in accordance with workplace procedures and site requirements
       
Element: Boiler unit plant is monitored and observed, in accordance with workplace procedures, to detect deviations from required operating conditions
       
Element: Corrective actions are taken to rectify boiler unit abnormalities, in accordance with workplace procedures and manufacturers' recommendations
       
Element: Test boiler unitplant operation
  • Operational tests are performed, in accordance with workplace procedures
       
Element: Boiler unit plant is observed for correct operational response, in accordance with workplace procedures
       
Element: Corrective action is taken, in accordance with workplace procedures, when response does not meet with documentation, boiler unit plant integrity or personnel safety requirements
       
Element: Boiler unit plant is returned to required operational status upon completion of test, in accordance with workplace procedures
       
Element: Analyse boiler unitplantfaults
  • Causes of abnormal boiler unit plant operating conditions are identified, in accordance with workplace procedures, and by analysing technical and operational information
       
Element: Corrective action is taken, in accordance with workplace procedures
       
Element: Boiler unit plant integrity and personnel safety is maintained, in accordance with workplace procedures, and in consultation with appropriate personnel and technical and operational documentation
       
Element: Appropriate personnel are notified when defects are detected, in accordance with workplace procedures
       
Element: Monitor boiler unitplant
  • Boiler unit plant to be monitored is identified, in accordance with workplace procedures
       
Element: Boiler unit plant is monitored for normal operation or to detect deviations, in accordance with workplace procedures
       
Element: Complete documentation
  • Boiler unit plant problems, movements, abnormalities and status is reported, in accordance with workplace procedures
       
Element: Documentation is updated, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Safety issues related to operating and monitoring boiler unit plant are identified, in accordance with workplace procedures and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations and legislative requirements 
Work requirements are identified, in accordance with workplace procedures, from relevant personnel and documentation 
Preoperational checks are carried out on boiler unit plant, in accordance with workplace procedures, manufacturers' recommendations and site requirements 
 
 
Combustion is established and fuel consumption at minimum levels is supported, in accordance with workplace procedures, manufacturers' recommendations and site requirements 
 
 
 
 
Operational tests are performed, in accordance with workplace procedures 
 
 
 
Causes of abnormal boiler unit plant operating conditions are identified, in accordance with workplace procedures, and by analysing technical and operational information 
 
 
 
Boiler unit plant to be monitored is identified, in accordance with workplace procedures 
 
Boiler unit plant problems, movements, abnormalities and status is reported, in accordance with workplace procedures 
 

Forms

Assessment Cover Sheet

UEPOPS339 - Operate and monitor a boiler unit
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPOPS339 - Operate and monitor a boiler unit

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: