Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPOPS351 Mapping and Delivery Guide
Operate H.V. condition changing apparatus

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPOPS351 - Operate H.V. condition changing apparatus
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to undertake the operation of all High Voltage (H.V.) condition changing apparatus.H.V. condition changing apparatus can include on and off load transformer tap changers, capacitor banks, rotary converters, voltage regulators, reactors, current limiters, rectifiers and transformers. H.V. changing apparatus works within system parameters such as voltage, current, frequency, volt ampere reactive load and equipment capability. Competency in this unit requires the ability to plan and prepare work, operate H.V. condition change apparatus and report on H.V. condition during operation. Individuals will, in general, work under supervision, in a power generation facility as an operator.Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Operations
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepareto operate H.V. condition changing apparatus
  • Safety requirements for operating High Voltage (H.V.) condition changing apparatus are adhered to, in accordance with Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, manufacturers' specifications and workplace procedures
       
Element: Location of H.V. condition changing apparatus is determined from plans, drawings, system diagrams and maps, in accordance with workplace procedures
       
Element: H.V. condition changing apparatus to be operated, is identified and confirmed, with relevant personnel, in accordance with workplace procedures
       
Element: Condition and status of H.V. condition changing apparatus is determined visually, in accordance with workplace procedures
       
Element: H.V. condition changing apparatus is prepared for operation, in accordance with workplace procedures
       
Element: Conduct H.V. condition changing apparatus operation
  • Relevant personnel are advised of progress during H.V. condition changing apparatus operation, in accordance with workplace procedures
       
Element: Conditions are evaluated prior to H.V. changing apparatus operation, in accordance with workplace procedures
       
Element: H.V. condition changing apparatus is operated in accordance with workplace procedures and manufacturers' recommendations
       
Element: H.V. condition changing apparatus is controlled and adjusted to achieve desired outcomes, in accordance with workplace procedures
       
Element: H.V. condition changing apparatus is examined, in accordance with workplace procedures, to ensure it has functioned correctly
       
Element: Conditions are re-evaluated to confirm correct H.V. condition changing apparatus outcome, in accordance with workplace procedures
       
Element: H.V. condition changing apparatus is secured, in accordance with workplace procedures
       
Element: Status of H.V. condition changing apparatus is confirmed, in accordance with workplace procedures
       
Element: Complete documentation
  • Equipment problems, movements, and status are reported, in accordance with workplace procedures
       
Element: Documentation is updated, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Safety requirements for operating High Voltage (H.V.) condition changing apparatus are adhered to, in accordance with Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, manufacturers' specifications and workplace procedures 
 
 
 
 
Relevant personnel are advised of progress during H.V. condition changing apparatus operation, in accordance with workplace procedures 
 
 
 
 
 
 
 
Equipment problems, movements, and status are reported, in accordance with workplace procedures 
 

Forms

Assessment Cover Sheet

UEPOPS351 - Operate H.V. condition changing apparatus
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPOPS351 - Operate H.V. condition changing apparatus

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: