Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPOPS368 Mapping and Delivery Guide
Operate manual systems

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPOPS368 - Operate manual systems
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to operate power generation plant in manual mode, in conjunction with coordinated systems, under the control of appropriate authorised personnel.Power generation plant may be manually controlled by an operator rather than automatically by a computer when required by circumstances. Competency in this unit requires the ability to plan and prepare work, operate plant and equipment manually and complete documentation. Individuals will, in general, work under supervision, as an operator in a power generation facility. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Operations
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare work
  • Safety issues are identified, in accordance with Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards and workplace procedures
  • Work requirements are identified from relevant personnel and documentation, in accordance with workplace procedures
  • Power generation plant status is identified and confirmed, in accordance with workplace procedures, site requirements and documentation
  • Preoperational checks are carried out on power generation plant, in accordance with manufacturers' recommendations and workplace procedures
       
Element: Work requirements are identified from relevant personnel and documentation, in accordance with workplace procedures
       
Element: Power generation plant status is identified and confirmed, in accordance with workplace procedures, site requirements and documentation
       
Element: Preoperational checks are carried out on power generation plant, in accordance with manufacturers' recommendations and workplace procedures
       
Element: Conduct manual operation of plant
  • Power generation plant to be manually controlled is identified and operated, in accordance with workplace operating procedures
       
Element: Power generation plant is manually operated within limits of its' design, in accordance with workplace procedures
       
Element: Power generation plant is monitored to detect deviations from normal operating conditions, in accordance with workplace procedures
       
Element: Corrective actions are taken to rectify power generation plant abnormalities, in accordance with manufacturers' recommendations and workplace procedures
       
Element: Complete documentation
  • Power generation plant problems, movements, and status are reported in accordance with workplace procedures
       
Element: Documentation is updated, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Safety issues are identified, in accordance with Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards and workplace procedures 
Work requirements are identified from relevant personnel and documentation, in accordance with workplace procedures 
Power generation plant status is identified and confirmed, in accordance with workplace procedures, site requirements and documentation 
Preoperational checks are carried out on power generation plant, in accordance with manufacturers' recommendations and workplace procedures 
 
 
 
Power generation plant to be manually controlled is identified and operated, in accordance with workplace operating procedures 
 
 
 
Power generation plant problems, movements, and status are reported in accordance with workplace procedures 
 

Forms

Assessment Cover Sheet

UEPOPS368 - Operate manual systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPOPS368 - Operate manual systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: