Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPOPS402 Mapping and Delivery Guide
Conduct multiple energy source isolation procedures for permit to work

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEPOPS402 - Conduct multiple energy source isolation procedures for permit to work
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required for the application of permit to work procedures where multiple energy sources require isolation for safe access to high voltage, low voltage or mechanical apparatus.Permits to workare a formal system used to control high risk activities in power generation facilities. They specify the control measures that will be put in place to minimise risks. Permits ensure that all hazards and precautions have been considered beforeany hazardous workbegins.Competency in this unit requires the ability to plan and prepare for isolation, de-isolation and restoration, perform isolationand perform de-isolation and restoration. Individuals will, in general, work as an operator in a power generation facility. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication. Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Operations
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for multiple energy source isolation
  • Work requirements, including permit to work, are identified and confirmed, in accordance with workplace procedures, with appropriate personnel or by site inspection
       
Element: Safety issues, Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations and industry standards are identified, in accordance with workplace procedures
       
Element: Materials, tools, equipment and resources to satisfy job plan and permit to work requirements are requisitioned and inspected for compliance, in accordance with workplace procedures
       
Element: Isolation work is planned sequenced and prioritised, in accordance with workplace procedures and permit requirements
       
Element: Permit to work and risk assessment are coordinated with other personnel involved in, or affected by isolations, in accordance with workplace procedures
       
Element: Personnel participating in work are briefed and roles and responsibilities are confirmed, in accordance with workplace procedures
       
Element: Perform multiple energy sourceisolation
  • Multiple energy source to be isolated is correctly identified, in accordance with workplace procedures
       
Element: Isolation is performed, in accordance with workplace procedures and permit to work requirements
       
Element: Verification of isolation, dissipation and restraint of energy sources is performed, in accordance with workplace procedures
       
Element: Isolation is confirmed, in accordance with workplace procedures
       
Element: Perform multiple energy sourcede-isolation and restoration
  • Multiple energy source de-isolation and restorations are performed, in accordance with workplace procedures and permit to work requirements
       
Element: Multiple energy source de-isolations are confirmed, in accordance with workplace procedures
       
Element: Work completion details are finalised, in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work requirements, including permit to work, are identified and confirmed, in accordance with workplace procedures, with appropriate personnel or by site inspection 
 
 
 
 
 
Multiple energy source to be isolated is correctly identified, in accordance with workplace procedures 
 
 
 
Multiple energy source de-isolation and restorations are performed, in accordance with workplace procedures and permit to work requirements 
 
 

Forms

Assessment Cover Sheet

UEPOPS402 - Conduct multiple energy source isolation procedures for permit to work
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPOPS402 - Conduct multiple energy source isolation procedures for permit to work

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: