Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEPOPS511 Mapping and Delivery Guide
Tune process plant and equipment
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEPOPS511 - Tune process plant and equipment |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | This unit involves the skills and knowledge required to complete the investigation, nomination and adjustment of tuning parameters associated with power generation process plant and equipment Tuning is a method in which one or moreparametersof power generation plant and equipment are adjusted up or down to achieve an improved or specified result. Tuning will include testing and reviewing power generation process plant and equipment to identify faults.Competency in this unit requires the ability to plan and prepare to tune generation process plant and equipment, testing and implementing process plant tuning and completing documentation. Individuals will, in general, work under supervision as an operator, in a power generation facility.Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | |||
Competency Field | Operations |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Plan and preparework |
| |||||||
Element: Resource and equipment requirements are identified, in accordance with workplace procedures | ||||||||
Element: Process plant availability, capability and limitations are identified, in accordance with workplace procedures | ||||||||
Element: Testing and monitoring equipment are connected, in accordance with workplace procedures, testing requirements and process plant integrity | ||||||||
Element: Initial operating state for process plant is maintained for testing, in accordance with workplace procedures, legislative requirements and industry standards | ||||||||
Element: Test procedures are identified and recording documentation or equipment is prepared, in accordance with workplace procedures | ||||||||
Element: Testing equipment is calibrated, in accordance with workplace procedures, industry standards and manufacturers' specifications | ||||||||
Element: Test plant and implement tuning | ||||||||
Element: Testing and tuning is performed, in accordance with workplace procedures and tuning program requirements | ||||||||
Element: Variations are reassessed and accommodated to enable test objectives to be met | ||||||||
Element: Testing results are analysed with reference to desired outcomes, and new settings for process plant are determined, in accordance with workplace procedures | ||||||||
Element: Accuracy of test results is assessed through analysis of test data, in accordance with workplace procedures | ||||||||
Element: Process plant is retuned to achieve desired outcomes, in accordance with workplace procedures | ||||||||
Element: Complete documentation |
| |||||||
Element: Changes to equipment operational settings are recommended to appropriate personnel, in accordance with workplace procedures | ||||||||
Element: Implementation of recommendations are monitored, in accordance with workplace procedures |