Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UETTDRDS43 Mapping and Delivery Guide
Develop high voltage and low voltage distribution protection systems
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UETTDRDS43 - Develop high voltage and low voltage distribution protection systems |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | This unit covers the development of appropriate protection systems for high voltage (HV) and low voltage (LV) distribution networks, including calculations of fault levels, selection of appropriate protection devices and automation requirements, and protection coordination schemes. It also includes recommendations to support the calculations and must ensure conformance to specific organisational operational and system planning requirements, and compliance with national or supply authority codes.The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace subject to regulations for undertaking of electrical work. Other conditions may apply under state and territory legislative and regulatory licencing requirements which must be confirmed prior to commencing this unit. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | |||
Competency Field | Design |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Plan and coordinate for the development of HV and LV protection systems |
| |||||||
Element: Purpose of the development is established and expected outcomes of the work are confirmed with appropriate personnel | ||||||||
Element: Organisational established procedures on policies and specifications for the development are obtained or established with appropriate personnel | ||||||||
Element: Equipment/tools and personal protective equipment (PPE) are selected and coordinated based on specified requirements and established procedures | ||||||||
Element: Work is prioritised and sequenced for the most efficient and effective outcome following consultation with others for completion within acceptable timeframes, to a quality standard and in accordance with established procedures | ||||||||
Element: Risk control measures are identified, prioritised and evaluated against the work schedule | ||||||||
Element: Relevant work permits are secured to coordinate the performance of work according to requirements and/or established procedures | ||||||||
Element: Resources, including personnel, equipment, tools and PPE, required for the job are identified, scheduled and coordinated and confirmed safe and in technical working order | ||||||||
Element: Liaison and communication issues with others/authorised personnel, authorities, clients and land owners are resolved and activities coordinated to carry out work | ||||||||
Element: Site is prepared according to the work schedule and to minimise risk and damage to property, commerce and individuals in accordance with established procedures | ||||||||
Element: Personnel participating in the work, including plant operators and contractors, are fully briefed and respective responsibilities coordinated and authorised, where applicable, in accordance with established procedures | ||||||||
Element: Carry out and coordinate the development of HV and LV protection systems |
| |||||||
Element: WHS/OHS and sustainable energy principles, functionality and practices to reduce the incidence of accidents and minimise waste are incorporated into the project in accordance with requirements and/or established procedures | ||||||||
Element: System design decisions are made on the basis of safety and effective outcomes according to requirements and/or established procedures | ||||||||
Element: Mathematical models of the HV and LV protection systems are used to analyse the effectiveness of the finished project in accordance with requirements and established procedures | ||||||||
Element: Technical advice is given to potential hazards, safety risks and control measures so that monitoring and preventative action can be undertaken and/or appropriate authorities consulted, where necessary, in accordance with requirements and established procedures | ||||||||
Element: Essential knowledge and associated skills are applied to analyse specific data and compare it with compliance specifications to ensure completion of the project within an agreed timeframe according to requirements | ||||||||
Element: Solutions to non-routine problems are identified and actioned using acquired essential knowledge and associated skills according to requirements | ||||||||
Element: Quality of work is monitored against personal performance agreement and/or established organisational and professional standards | ||||||||
Element: Complete and coordinate the development of HV and LV protection systems |
| |||||||
Element: Appropriate personnel are notified of completion and reports and/or completion documents are finalised | ||||||||
Element: Reports and/or completion documents are submitted to relevant personnel/organisations for approval and, where applicable, statutory or regulatory approval | ||||||||
Element: Approved copies of design documents are issued and records are updated in accordance with established procedures |