Application
Work applies to the minor adjustments of motorcycles in the motorcycle retail, service and repair environment. Work requires individuals to demonstrate some judgement and problem-solving skills in managing own work activities and contributing to a productive team environment. |
Prerequisites
Not applicable.
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare for work | 1.1. Workplace instructions are used to determine job requirements relating to adjusting motorcycles 1.2. Workplace health and safety (WHS) requirements are identified and applied 1.3. Work areas are cleared to allow set-up and activities to take place according to workplace policies and procedures |
2. Inspect motorcycle and determine work requirement | 2.1. Inspection is carried out to determine adjustment requirements according to workplace procedures and manufacturer and component supplier specifications and without causing damage to components or systems 2.2. Inspection findings are reported according to workplace procedures, including recommendations for necessary minor adjustments |
3. Perform minor adjustments | 3.1. Adjustment options are analysed and those most appropriate to the circumstances are selected 3.2. Appropriate tools, techniques and materials are selected and prepared 3.3. Adjustments are carried out according to workplace procedures and manufacturer and component supplier specifications and without causing damage to components or systems 3.4. Post-adjustment testing is carried out to ensure safe and correct operation of the motorcycle |
4. Clean up work area and finalise work processes | 4.1. Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use 4.2. Tools and equipment are checked and stored according to workplace expectations 4.3. Documentation is completed according to workplace procedures |
Required Skills
Required skills |
communication skills to: clarify workplace instructions and determine job requirements gain information from appropriate persons and assistance as required literacy skills: reading skills to the level required to understand information relating to work orders, including common industry terminology, work plans and safety procedures writing skills to prepare reports and interpret technical information and specifications numeracy skills to correctly interpret metric and non-metric systems of measurement planning and organising skills to: identify risk factors to minimise risk to self and others contribute to activities which implement and follow standard workplace procedures problem-solving skills to: identify technical and procedural problems refer problems outside area of responsibility to appropriate person self-management skills to: locate and identify appropriate tools and equipment recognise limitations and seek timely advice follow basic workplace documentation, such as maintenance procedures teamwork skills to: work with others and in a team by cooperating with team members technical skills to: apply technical information related to motorcycle componentry and maintenance procedures select and use appropriate tools and equipment technology skills to: use workplace technology to assist with work practices |
Required knowledge |
WHS regulations, requirements, equipment and material, and personal safety requirements motorcycle terminology methods of sourcing information relevant to adjusting motorcycles motorcycle inspection procedures motorcycle adjustment procedures, including the use of tools and equipment motorcycle post-adjustment testing procedures |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge. A person who demonstrates competency in this unit must be able to: observe safety procedures and requirements select methods and techniques appropriate to the circumstances preform a range of adjustment tasks on a minimum of three different motorcycles with real or simulated adjustment requirements according to workplace, manufacturer and component supplier requirements complete workplace documentation present motorcycle in a condition that complies with workplace requirements. |
Context of, and specific resources for assessment | Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting. Assessment is to occur: using standard workplace practices and procedures following safety requirements applying environmental constraints. Assessment is to comply with relevant: regulatory requirements Australian standards industry codes of practice. The following resources should be made available: workplace location or simulated workplace motorcycles and motorcycle components equipment, hand and power tools and specialised repair tools and equipment appropriate to adjusting motorcycle specifications and workplace instructions. |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of this Training Package. Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge. Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application. Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role. Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients. Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Workplace instructions may include: | computer-generated instructions verbal instructions written instructions. |
Job requirements may include: | motorcycle inspection and adjustment methods, processes and equipment. |
Motorcycles may include: | road and touring enduro agricultural motocross trials scooters and mopeds 2 stroke and 4 stroke. |
Workplace health and safety (WHS) requirements: | are those prescribed under legislation, regulations, codes of practice, and workplace policies and procedures may include: protective clothing and equipment use of tools and equipment handling of material use of fire-fighting equipment first aid equipment hazard control, including control of hazardous materials and toxic substances. |
Minor adjustments may include: | brakes clutch suspension and steering engine, attachments and controls chain tension foot controls handlebars and controls accessories. |
Appropriate tools may include | hand tools hand, power and air tools specialised motorcycle repair tools floor stands, workbench. |
Documentation may include: | warranty information job card or work order workplace computerised or written customer records and invoice. |
Sectors
Mechanical - Motorcycle | |
Unit sector | Technical |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.