Application
This unit applies to individuals who undertake servicing of diesel fuel injection systems and completion of work finalisation processes, including clean-up and documentation. |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare to service diesel fuel system components | 1.1. Determine job requirements, including method, processes and equipment 1.2. Read and interpret job specifications 1.3. Access and interpret information from manufacturer/component supplier specifications and workshop manuals 1.4. Identify and prepare equipment, resources and tooling and check for safe and effective operation 1.5. Determine procedures to minimise task time |
2. Carry out service | 2.1. Observe occupational health and safety (OHS) requirements, including individual state/territory regulatory requirements and warnings, in relation to working with diesel fuel injection systems throughout the work 2.2. Observe National Environmental Protection Measures for Diesel Vehicles (Guidelines) throughout the work, as applicable to tasks 2.3. Perform service in accordance with workplace procedures and manufacturer/component supplier specifications 2.4. Select and use appropriate tooling, techniques and materials 2.5. Make adjustments in accordance with manufacturer/component supplier specifications |
3. Prepare equipment/ engine for use or storage | 3.1. Complete servicing schedule documentation 3.2. Make final inspection to ensure work is to workplace expectations 3.3. Remove waste and scrap following workplace procedures 3.4. Clean equipment and work area in accordance with workplace procedures 3.5. Maintain and store tooling and equipment in accordance with workplace procedures 3.6. Process job card in accordance with workplace procedures |
Required Skills
Required skills |
Required skills include: technical skills to the level required to use workplace technology and tools related servicing diesel fuel injection systems, including the use of specialist tooling and equipment, measuring equipment, computerised technology and communication devices communication skills to the level required to confirm work requirements and specifications, to communicate effectively regarding work requirements with supervisor, other workers and customers, to apply common industry terminology, to report work outcomes and problems, and to relate to people from a range of social, cultural and ethnic backgrounds and of varying physical and mental abilities literacy skills to the level required to understand information related to work orders and to locate, interpret and apply manufacturer/component supplier technical information and specifications, workplace policies and safety procedures numeracy skills to the level required to correctly calculate time, complete tests and measurements to determine repair/replacement requirements, calculate material requirements and establish quality checks problem-solving skills to the level required to plan and organise activities and establish safe and effective work processes which anticipate and/or resolve problems and downtime, and to systematically develop solutions to avoid or minimise reworking and avoid wastage team skills to the level required to work effectively and cooperatively with others to optimise workflow and productivity organisational skills to the level required to plan and organise activities, including preparation and layout of worksite, and obtaining equipment and materials to avoid backtracking or workflow interruptions |
Required knowledge |
Required knowledge includes: OHS and environmental regulations/requirements, equipment, material and personal safety requirements National Environmental Protection Measures for Diesel Vehicles (Guidelines) dangers of working with diesel fuel injection systems identification of application, purpose and operating principles types and layout of service/repair manuals (hard copy and electronic) engine starting procedures bleeding procedures selection, checking and use of tooling and equipment manufacturer and/or component supplier specifications applicable commonwealth, state or territory legislation, regulations, standards and codes of practice, including OHS and environment, relevant to servicing diesel fuel injection systems organisational policies and procedures, including quality requirements, reporting and recording procedures, and work organisation and planning processes, related to servicing diesel fuel injection systems |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors must be satisfied that the candidate can competently and consistently: observe safety procedures and requirements communicate effectively with others involved in or affected by the work select methods and techniques appropriate to the circumstances complete preparatory activity in a systematic manner identify application, purpose and operating principles conduct inspection, servicing and operational testing in accordance with workplace and manufacturer/component supplier specifications complete service of diesel fuel system and associated components within workplace timeframes. |
Context of, and specific resources for assessment | The application of competency is to be assessed in the workplace or a simulated environment that reflects as far as possible the actual working environment. Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints. Assessment is to comply with relevant regulatory requirements, including specified Australian standards. Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability. The following resources should be made available: a range of diesel fuel injection and components relevant to the application materials relevant to servicing diesel fuel injection systems equipment, hand and power tooling appropriate to servicing diesel fuel injection systems specifications and work instructions. |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of this Training Package. Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of Required Skills and Knowledge. Assessment methods must be by direct observation of tasks and include questioning on Required Skills and Knowledge to ensure its correct interpretation and application. Assessment may be applied under project-related conditions (real or simulated) and require evidence of process. Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances. Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role. |
Guidance information for assessment | Assessment processes and techniques must be culturally sensitive and appropriate to the language and literacy capacity of the candidate and the work being performed. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Servicing | Servicing is to include: fluids filters adjustments and operational testing visual inspections and documents injector (pop) testing spill timing |
Tooling and equipment | Tooling and equipment may include: hand tooling gauges calibration and pressure testing equipment |
Materials | Materials may include: lubricants spare parts cleaning materials |
Information/documents | Information/documents may include: verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets (MSDS), diagrams or sketches safe work procedures related to servicing diesel fuel injection systems regulatory/legislative requirements pertaining to servicing diesel fuel injection systems engineer's design specifications and instructions organisation work specifications and requirements instructions issued by authorised enterprise or external persons Australian standards |
OHS requirements | OHS requirements are to be in accordance with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include: personal protective equipment and clothing safety equipment first aid equipment hazard and risk control electrical safety elimination of hazardous materials and substances manual handling, including shifting, lifting and carrying emergency procedures |
Legislative requirements | Legislative requirements are to be in accordance with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include: award and enterprise agreements industrial relations Australian standards Australian Design Rules Environment Protection Regulations (Diesel Fuels) National Environment Protection Measures for Diesel Vehicles (Guidelines) confidentiality and privacy OHS the environment equal opportunity anti-discrimination relevant industry codes of practice duty of care |
Environmental requirements | Environmental requirements may include: waste management pollution noise dust clean-up management |
Quality requirements | Quality requirements may include: regulations, including Australian standards internal organisational quality policies and procedures enterprise operations and procedures |
Organisational policies and procedures | Organisational policies and procedures may include: quality policies and procedures, including Australian standards OHS, sustainability, environment, equal opportunity and anti-discrimination manufacturer specifications and industry codes of practice safe work procedures reporting and recording procedures |
Sectors
Unit sector | Technical |
Employability Skills
This unit contains employability skills. |
Licensing Information
Refer to Unit Descriptor