Application
The unit includes identification and confirmation of work requirement, preparation for work, inspections/testing and analysis of outcomes and completion of repair actions and work finalisation processes, including clean-up and documentation. This unit of competence applies to the following and should be contextualised to the qualification to which it is being applied: motorcycles and outdoor power equipment. Work involves wheeled vehicles, including chain drive vehicles. Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment. Work is carried out in accordance with award provisions. |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare to undertake repairs to suspension systems and associated components | 1.1. Nature and scope of work requirements are identified and confirmed 1.2. OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work 1.3. Procedures and information such as workshop manuals and specifications, and tooling, are sourced 1.4. Method options are analysed and those most appropriate to the circumstances are selected and prepared 1.5. Technical and/or measurement requirements for suspension systems are sourced and support equipment is identified and prepared 1.6. Warnings in relation to working with wheeled are observed |
2. Conduct inspection/test and analysis | 2.1. Methods for inspection/test procedures and manufacturer/ component supplier specifications 2.2. Inspection/test results are compared with manufacturer/ component supplier specifications to indicate compliance or non-compliance 2.3. Results are documented with evidence and supporting information and recommendation(s) made 2.4. Report is forwarded to persons for action in accordance with workplace procedures |
3. Carry out repairs | 3.1. OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work 3.2. Procedures and information are identified and sourced 3.3. Technical and tool requirements for repair are identified and support equipment is identified and prepared 3.4. Methods for repair are implemented in accordance with workplace procedures and manufacturer/component supplier specifications 3.5. Adjustments made during the repair are in accordance with manufacturer/component supplier specifications |
4. Prepare vehicle for use or storage | 4.1. Repair schedule documentation is completed 4.2. Final inspection is made to ensure protective guards, safety features and cowlings are in place 4.3. Final inspection is made to ensure work is to workplace expectations 4.4. Vehicle/equipment is cleaned for use or storage to workplace expectations 4.5. Job card is processed in accordance with workplace procedures |
Required Skills
Required skills |
apply research and interpretive skills sufficient to locate, interpret and apply manufacturer/component supplier procedures, workplace policies and procedures apply analytical skills for identification and analysis of technical information apply plain English literacy and communication skills in relation to dealing with customers and team members apply questioning and active listening skills for example when obtaining information from customers apply oral communication skills sufficient to convey information and concepts to customers apply planning and organising skills to own work activities, including making good use of time and resources, sorting out priorities and monitoring own performance interact effectively with other persons both on a one-to-one basis and in groups, including understanding and responding to the needs of a customer and working effectively as a member of a team to achieve a shared goal establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and avoid wastage use mathematical ideas and techniques to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks use workplace technology, including the use of measuring equipment, computerised technology and communication devices and the documenting/recording of results |
Required knowledge |
A working knowledge of: OH&S and environmental regulations/requirements, equipment, material and personal safety requirements the types, characteristics, uses and limitations of commonly encountered suspension systems dangers of working with equipment on chassis types and layout of service/repair manuals (hard copy and electronic) repair procedures enterprise quality procedures work organisation and planning processes |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | It is essential that competence in this unit signifies ability to transfer competence to changing circumstances and to respond to unusual circumstances in the critical aspects of: observing safety procedures and requirements communicating effectively with others involved in or affected by the work selecting methods and techniques appropriate to the circumstances completing preparatory activity in a systematic manner interpreting inspection/test results conducting repair of a range of systems in accordance with manufacturer/component supplier and workplace requirements completing repairs within workplace timeframes vehicle/equipment presentation to customer in compliance with workplace requirements |
Context of, and specific resources for assessment | Application of competence is to be assessed in the workplace or simulated worksite Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints Assessment is to comply with regulatory requirements, including Australian Standards The following resources should be made available: workplace location or simulated workplace material relevant to the repair of suspensions systems equipment, hand and power tooling appropriate to the repair of suspensions systems activities covering mandatory task requirements specifications and work instructions |
Method of assessment | Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies Assessment may be applied under project related conditions and require evidence of process Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role |
Guidance information for assessment |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Suspension systems | Suspension systems may be gas, hydraulic, mechanical or rubber suspension Suspension systems may include: lateral and longitudinal arms, independent suspension ball joints, rose joints self-levelling device, ride control, height control |
Repair methods | Methods are to include: functional testing, pressure testing, electrical testing visual, aural and functional assessments (including: damage, corrosion, fluid levels, fluid leaks, wear, alignment) adjustment of shock absorbers |
OH&S | OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances |
Personal protective equipment | Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices |
Safe operating procedures | Safe operating procedures are to include, but are not limited to operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors |
Emergency procedures | Emergency procedures related to this unit are to include but may not be limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation |
Environmental requirements | Environmental requirements are to include but are not limited to waste management, noise, dust and clean-up management |
Quality requirements | Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures |
Statutory/regulatory authorities | Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice |
Tooling and equipment | Tooling and equipment may include hand tooling, meters, gauges, load testing devices, computerised diagnostic equipment and shock absorber testers |
Materials | Materials may include spare parts, lubricants, fluids and cleaning materials |
Communications | Communications are to include, but are not limited to verbal and visual instructions and fault documenting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers |
Information/documents | Sources of information/documents may include: verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches safe work procedures related to the repair of suspension systems regulatory/legislative requirements pertaining to automotive industry, including Australian Design Rules engineer's design specifications and instructions organisation work specifications and requirements instructions issued by authorised enterprise or external persons Australian Standards |
Sectors
Unit sector | Technical |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not Applicable