Application
This unit describes the performance outcomes required to select and use adhesives with a range of automotive and marine surfaces. It involves preparing for the task, selecting and using tools and equipment, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry. The adhesives include those used with automotive, marine, motorcycle, aircraft or recreational vehicle materials.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
Elements Elements describe the essential outcomes. | Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section. |
1. Prepare for work | 1.1 Job requirements are determined from workplace instructions 1.2 Adhesive information is accessed and interpreted 1.3 Hazards associated with the work are identified and risks are managed 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability 1.5 Work area is prepared and work is planned to minimise waste and use time efficiently |
2. Select adhesive | 2.1 Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures 2.2 Specific safety data sheet (SDS) information for selected adhesive is identified and followed |
3. Apply adhesive to prepared surfaces | 3.1 Surfaces are cleaned and prepared according to adhesive manufacturer specifications 3.2 Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components |
4. Complete work processes | 4.1 Final adhesive selection is made and presented for use 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 4.3 Tools and equipment are checked and stored according to workplace procedures 4.4 Workplace documentation is processed according to workplace procedures |
Evidence of Performance
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
select and apply adhesives to three different automotive or marine components, in which the work must involve one door trim.
Evidence of Knowledge
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to selecting and applying adhesives in automotive and marine service and repair work, including procedures for:
selecting and using PPE
using safety data sheets (SDS) for adhesives
using specialist tools and equipment
storing adhesives
environmental requirements, including procedures for trapping, storing and disposing of adhesives and waste materials
adhesive manufacturer specifications
adhesive types required for different automotive and marine materials
adhesive application techniques and procedures, including:
surface preparation
application
cleaning and disposal
procedures for protecting vehicle, vessel and components when applying adhesives
procedures for final inspection of applied adhesive.
Assessment Conditions
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the adhesives they have selected and used on vehicles, vessels and components, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive or marine trimming workplace or simulated workplace
workplace instructions
instructions relating to the selection and use of adhesives
SDS for adhesives
adhesives
PPE required to use adhesives
three different automotive or marine components as specified in the performance evidence requiring the use of adhesives
tools, equipment and materials appropriate for applying adhesives.
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.
Skills | Description |
Learning skills to: | locate appropriate sources of information efficiently. |
Writing skills to: | legibly and accurately fill out workplace documentation. |
Oral communication skills to: | clarify instructions and procedures clearly report quality issues and job outcomes. |
Planning and organising skills to: | plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed within workplace timeframes. |
Technology skills to: | use specialist adhesive tools and equipment. |
Range Statement
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Adhesive information must include: | adhesive-specific specifications adhesive-specific application and removal instructions and processes SDS information manufacturer specifications. |
Safety and environmental requirements must include: | work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for: selecting and using PPE using SDS for adhesives using specialist tools and equipment storing adhesives environmental requirements, including procedures for trapping, storing and disposing of adhesives and waste materials. |
Sectors
Technical - Trimming and Upholstery
Competency Field
Vehicle Body