Application
This unit of competency supports demolition workers who perform demolition tasks, such as removing fixtures and fittings, ceilings, walls, floors and floor support systems of all types of buildings using hand tools and equipment.
Prerequisites
Apply OHS requirements, policies and procedures in the construction industry |
Elements and Performance Criteria
1 | Plan and prepare. | 1.1 | Work instructions are obtained using relevant information, confirmed with colleagues or supervisor, and applied to planning and preparation. |
1.2 | Work health and safety (WHS) requirements are identified and applied to task planning according to safety plans and policies and work site requirements. | ||
1.3 | Environmental requirements are identified and applied according to environmental plans and regulatory obligations. |
2 | Identify and check tools and equipment. | 2.1 | Hand tools and equipment to be used in the demolition process are identified and checked for serviceability, and faults are rectified and reported. |
2.2 | Functions and methods of operation of demolition tools and equipment are identified from specifications, standards and manufacturer instructions. | ||
2.3 | Specific WHS requirements for the selected tools and equipment are identified and applied. |
3 | Complete demolition tasks. | 3.1 | Work site inspection is conducted and hazards associated with individual demolition tasks are assessed immediately prior to commencing work according to workplace procedures. |
3.2 | Safe demolition work method is amended if required and confirmed with colleagues or supervisor. | ||
3.3 | Work area is prepared for the use of demolition tools and equipment. | ||
3.4 | Tools and equipment that meet the requirements of the demolition task are selected. | ||
3.5 | Pre-operational checks are completed according to manufacturer recommendations. | ||
3.6 | Tools and equipment are used for their intended purpose in demolition tasks according to regulations, standards, codes of practice and workplace requirements. | ||
3.7 | Work progress and hazards or issues arising during work tasks are communicated with work team according to workplace requirements. | ||
3.8 | Tools and equipment are placed in safe locations when not in immediate use. |
4 | Clean up. | 4.1 | Work area is cleared and materials are sorted for reuse or recycling and removed, and waste is disposed of using safe manual handling techniques and according to workplace procedures, regulations, codes of practice, and job specifications |
4.2 | Tools and equipment are cleaned, checked, maintained and stored according to manufacturer recommendations and standard work practices. |
Required Skills
Required skills |
learning skills to: evaluate own actions and make judgements about performance and necessary improvements recognise signs indicating undiscovered hazards on a demolition site, for example presence of termites respond to change, such as differences in current work site environmental and sustainability requirements numeracy skills to: check levels of lubricants in equipment perform measurements and calculations associated with work, such as when determining specified length of wall to be removed oral communication skills to: enable clear and direct communication, using questioning to identify and confirm requirements, and share information report hazards on the work site, including faults in tools, equipment and materials use language and concepts appropriate to cultural differences reading skills to: interpret documentation, including drawings and specifications understand written instructions, procedures and signage writing skills to complete pre-operational checklists and simple equipment fault forms |
Required knowledge |
general construction terminology hazards that may exist or arise on demolition sites, including those associated with the use of demolition tools and equipment procedures for: environmentally friendly waste management managing risks and hazards on demolition sites sorting and storing reusable and recyclable materials types of information required to plan and prepare for safe and effective completion of demolition tasks types of portable power tools, hand tools and equipment applicable to demolition tasks, including: applications of each tool or piece of equipment maintenance requirements safe methods of operation for different demolition tasks |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | This unit of competency could be assessed in the workplace by observation of the selection and use of hand tools and equipment and completion of on-site demolition tasks as part of a team. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person should demonstrate the ability to: complete five on-site demolition tasks safely and effectively, using appropriate combinations of tools and equipment, to perform at least one of each of the following tasks: knocking down structures loading out rubbish pulling apart equipment removing fixtures and fittings locate, interpret and apply relevant information, standards and specifications comply with site safety plan and requirements of WHS legislation, regulations and codes of practice applicable to workplace operations comply with organisational policies and procedures, including quality requirements communicate and work effectively and safely with others follow work instructions, operating procedures and inspection practices to safely and effectively use demolition tools and equipment for their appropriate application, ensuring: there is no damage to tools or equipment work is completed to specification compliance with regulations, standards and organisational quality procedures and processes. |
Context of and specific resources for assessment | Assessment of this unit: must be in the context of the work environment must meet relevant compliance requirements. Resource implications for assessment include: an induction procedure realistic tasks covering the mandatory task requirements relevant specifications and work instructions hand tools and equipment appropriate to applying safe work practices support materials appropriate to activity workplace instructions relating to safe work practices and addressing hazards and emergencies information relevant to each task, such as safety data sheets. |
Method of assessment | Assessment for this unit must verify the practical application of the required skills and knowledge, using a combination of the following methods: direct observation of tasks in real work conditions questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application review of relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Guidance information for assessment | This unit could be assessed on its own or in combination with other units relevant to the job function. Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Information may include: | advice and guidelines relating to regulatory and legislative requirements for using demolition tools and equipment current Australian standards relating to using demolition hand tools and equipment diagrams or sketches instructions issued by authorised organisational or external personnel job safety analyses (JSA) memos plans, drawings and specifications procedures relating to the use of demolition tools and equipment quality requirements safe work method statements (SWMS) safety data sheets (SDS) signage verbal, written and graphical instructions, including manufacturer specifications and instructions where specified work bulletins work schedules, plans and specifications. |
Work health and safety requirements must comply with state or territory legislation and regulations and demolition project safety plan and may include: | emergency procedures, including extinguishing fires, organisational first aid requirements, and evacuation procedures manual handling activities that may require the assistance of others or the use of manual or mechanical lifting devices where size, weight or other issues, such as a disability are a factor hazard control identification of hazardous materials and substances and relevant safe handling or quarantining procedures for each, including: animal residue asbestos dust lead lead-based paints pesticide residue personal protective equipment (PPE) prescribed under legislation, regulations and workplace policies and practices use of safe operating procedures, including operational risk assessment and treatments associated with: equipment tagging fall protection identification and preparation of access and egress points identification of equipment guarding and cut-off switches lighting power cables, including overhead service trays, cables and conduits restricted access barriers surrounding structures traffic control trip hazards work site visitors and the public working at heights working in confined spaces working in proximity to others. |
Environmental requirements may include: | management of: clean-up dust energy use noise vibration waste water use sedimentation control stormwater quality. |
Hand tools and equipment may include: | hand tools, such as: bars: crow pinch bolt cutters hacksaws hammers handsaws jack hammers, electric and pneumatic picks and mattocks pliers power drills and saws shovels and spades sledge hammers spanners wrenches equipment, such as: brooms exhaust fans pallet trolleys safety equipment, including: barricades fall prevention PPE scaffolds signs props, such as: acrows trishores vacuums wheelbarrows. |
Hazards associated with individual demolition tasks may include: | hazards identified in project demolition plan unpredicted hazards uncovered as a result of prior work completed on site, such as: buried asbestos waste fire damage termite damage undocumented new or relocated services, including electrical wiring. |
Demolition tasks: | must include: knocking down structures loading out rubbish dismantling equipment removing fixtures and fittings may be performed: at ground level at heights in confined spaces on new construction sites on existing structures being removed, renovated or extended, which involves the complete or partial removal of components over water under water underground. |
Pre-operational checks may include: | hydraulic fluid levels of lubricants water. |
Communication with work team may include: | non-verbal communication, including immediate stop work flags or notices in the case of uncovered hazards that must be re-assessed verbal communication use of technological equipment. |
Sectors
Demolition
Employability Skills
This unit contains employability skills.
Licensing Information
Licensing, legislative, regulatory or certification requirements apply to demolition work in different States and Territories. Candidates are advised to consult with the relevant regulatory authorities.