Application
This unit of competency supports the application of communication, interpersonal and teamwork skills, and the use of technology. The skills and knowledge acquired upon completion of this unit would support the needs of employees in the SSIS industry sector in positions such as field coordination and data collection.
Prerequisites
Nil
Elements and Performance Criteria
1 | Plan and prepare for support task. | 1.1 | Requirements of the job are clarified with relevant personnel according to organisational guidelines. |
1.2 | Tools, equipment and supplies appropriate to the environment are selected and prepared according to specifications. | ||
1.3 | Safety requirements for the protection of site personnel and the public are determined with regard to the field support services and their effect on the environment. | ||
1.4 | Plans are examined to determine the location of services. | ||
1.5 | Personal protective equipment is used according to OHS guidelines. |
2 | Execute support tasks. | 2.1 | Barricades, protective works and signs are erected, when required according to organisational guidelines. |
2.2 | Surface positions are determined and marked according to accepted standards using information available from site drawings and references, and relevant personnel. | ||
2.3 | Support tasks are carried out under direction and according to specifications. |
3 | Finalise the task. | 3.1 | Site is restored as near as practicable to original condition and any waste generated is disposed of in an environmentally friendly manner. |
3.2 | Tools and equipment are cleaned and stored in a secure location. | ||
3.3 | Repair work is organised for unsafe or faulty tools and equipment. | ||
3.4 | Required spatial business documentation is completed accurately and promptly according to organisational guidelines. |
Required Skills
This section describes the essential skills and knowledge and their level, required for this unit. |
Required skills ability to select and use required tools appropriately communication skills to: discuss vocational issues effectively with colleagues impart knowledge and ideas through oral, written and visual means interpersonal skills e.g. cooperation and flexibility literacy skills to: assess and use workplace information read and record data numeracy skills to: accurately record and collate undertake basic computations organisational skills to prioritise daily activities spatial skills to apply understanding of height, depth, breadth, dimension and position to actual operational activity and virtual representation Required knowledge industry ethics and practices relating to field activity OHS requirements relating to field activity spatial data measuring and recording work allocation procedures |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, the range statement and the Assessment Guidelines for this Training Package. | |
Overview of assessment | This unit of competency could be assessed on its own or in combination with other units relevant to the job function, for example CPPSIS3017A |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person who demonstrates competency in this unit must be able to provide evidence of: selecting equipment demonstrating critical aspects of working safely providing support in determining and marking positions knowledge of the required spatial tools and equipment. |
Specific resources for assessment | Resource implications for assessment include access to: assessment instruments, including personal planner and assessment record book assignment instructions, work plans and schedules, policy documents and duty statements registered training provider of assessment services relevant guidelines, regulations and codes of practice suitable venue and equipment. Access must be provided to appropriate learning and assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities. |
Context of assessment | Holistic: based on the performance criteria, evidence guide, range statement, and required skills and knowledge. |
Method of assessment | Demonstrated over a period of time and observed by the assessor (or assessment team working together to conduct the assessment). Demonstrated competency in a range of situations, that may include customer/workplace interruptions and involvement in related activities normally experienced in the workplace. Obtained by observing activities in the field and reviewing induction information. If this is not practicable, observation in realistic simulated environments may be substituted. |
Guidance information for assessment | Assessment requires that the clients’ objectives and industry expectations are met. If the clients’ objectives are narrowly defined or not representative of industry needs, it may be necessary to refer to portfolio case studies of a variety of surveying and spatial information services requirements to assess competency. Oral questioning or written assessment and hypothetical situations (scenarios) may be used to assess underpinning knowledge (in assessment situations where the candidate is offered a preference between oral questioning or written assessment, questions are to be identical). Supplementary evidence may be obtained from relevant authenticated correspondence from existing supervisors, team leaders or specialist training staff. All practical demonstration must adhere to the safety and environmental regulations relevant to each State or Territory. Where assessment is for the purpose of recognition (recognition of current competencies [RCC] or recognition of prior learning [RPL]), the evidence provided will need to be authenticated and show that it represents competency demonstrated over a period of time. In all cases where practical assessment is used it will be combined with targeted questioning to assess the underpinning knowledge. Assessment processes will be appropriate to the language and literacy levels of the candidate and any cultural issues that may affect responses to the questions, and will reflect the requirements of the competency and the work being performed. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the performance criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts. | |
Relevant personnel may include: | colleagues staff or employee representatives supervisors or line managers suppliers users. |
Organisational guidelines may include: | code of ethics company guidelines legislation relevant to the work or service function manuals OHS policies and procedures personnel practices and guidelines outlining work roles and responsibilities. |
Equipment and supplies may include: | data recording equipment measuring instruments personal computer-based digitising boards tools vehicles. |
Specifications may include: | budget data capture methods personnel required project deliverables resources needed timelines. |
Personal protective equipment may include: | breathing apparatus gloves helmets overalls masks and respirators safety boots safety glasses safety vests sun protection equipment. |
OHS may include: | Australian standards development of site safety plan identification of potential hazards inspection of work sites training staff in OHS requirements use of equipment and signage. |
Accepted standards may include: | Environment Protection Authority (EPA) recommendations state, territory and federal legislative requirements manufacturer instructions and specifications OHS standards organisational guidelines relevant industry codes of practice. |
Support tasks may include: | equipment maintenance identifying, determining and marking positions obtaining supplies recording data driving. |
Environmentally friendly manner may include: | placing hazardous material such as chemical-based products, paint cans and used oil into a designated bin and taking it to an appropriate disposal centre placing recyclable rubbish such as plastic, paper, cans, cardboard, glass and plastic bottles into a designated bin separating degradable and non-degradable waste. |
Spatial business documentation may include: | databases detailed technical description of the spatial data and its qualifiers emails and faxes quotations and estimates standard letters tax invoices statements. |
Sectors
Surveying and spatial information services
Employability Skills
This unit contains employability skills.
Licensing Information
No licensing, legislative and regulatory requirements apply to this unit at the time of endorsement.