Application
This unit applies to production operators working in the pharmaceutical sector. This person would typically work within defined Good Manufacturing Practice (GMP) programs and procedures. This unit typically targets the production worker responsible for applying basic operating principles to the operation and monitoring of measuring and dispensing equipment. When batch or product changeover procedures are part of this work process, the procedures should be used to customise the application of this unit. Where more detailed changeovers are carried out, FDFOP2011A Conduct routine maintenance, should be considered. |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare to dispense raw materials | 1.1. Materials are inspected to confirm type, quality clearance, quantities and identify any obvious contamination or non-compliance 1.2. Measuring and weighing equipment is selected appropriate to dispensing requirements and checked to confirm readiness for use 1.3. Containers/bags and labels are available as required 1.4. Pre-start checks are carried out as required by workplace requirements |
2. Measure and/or weigh raw materials | 2.1. Non-bulk ingredients and additives are weighed/measured to meet production requirements 2.2. Dispensed ingredients are labelled according to workplace procedure 2.3. Accuracy of measuring/dispensing equipment is monitored to identify variation in operating conditions 2.4. Variation in equipment operation is identified and maintenance requirements are reported according to workplace reporting requirements 2.5. The work area is maintained according to housekeeping standards 2.6. Work is conducted in accordance with workplace environmental guidelines |
3. Shut down the dispensing process | 3.1. Dispensing equipment is cleaned according to workplace procedure 3.2. Unacceptable equipment/utensil condition is identified and reported 3.3. Dispensed materials are recorded and reconciled 3.4. Maintenance requirements are identified and reported |
Required Skills
|
Required skills |
Ability to: access workplace information to identify dispensing requirements select, fit and use personal protective clothing and/or equipment, such as breathing apparatus and fume cabinets as required confirm supply of necessary raw materials, such as checking raw material labels and codes, quantity and quality clearance conduct pre-start checks on equipment, such as inspecting the condition and cleanliness of equipment and utensils, taring scales and carrying out any related procedures to confirm that equipment is accurately calibrated and fit for use measure materials and additives within specified accuracy range to meet batch requirements calculate assay/potency adjustment verify accuracy of raw materials dispensed with raw materials records take corrective action in response to out-of-specification results pace dispensing to meet production requirements pack and label dispensed materials as required follow labelling procedures reconcile and record materials dispensed against materials released and return unused materials to storage as required stack dispensed materials for transfer to designated location ensuring required material segregation handle containers according to workplace procedures to maintain integrity of materials clean dispensing equipment and utensils according to workplace procedures respond to and/or report equipment failure within level of responsibility complete dispensing records as required by workplace recording system maintain work area to meet housekeeping standards collect samples and conduct test according to enterprise procedures use oral communication skills/language competence to fulfil the job role as specified by the organisation, including questioning, active listening, asking for clarification and seeking advice from supervisor work cooperatively within a culturally diverse workforce |
Required knowledge |
Knowledge of: purpose and basic principles of the dispensing process, including the characteristics of raw materials and related handling requirements dangerous goods handling requirements and procedures relevant legislative responsibilities and workplace systems for recording information on dispensed pharmaceutical materials and related workplace coding and labelling systems and purpose the relationship between the dispensing process and related operations, including an understanding of accuracy/tolerance and consequence of error purpose, measuring/accuracy capacity of instrumentation and related equipment calibration responsibilities and procedures control points in the dispensing process procedures for calculating assay and adjusting potency raw materials reconciliation purpose and procedures, such as reconciliation of S8 materials GMP requirements associated with the dispensing process and related control measures procedures for requisitioning, receiving and returning ingredients from stores typical equipment faults and related causes, including signs and symptoms of faulty equipment and early warning signs of potential problems occupational health and safety (OHS) hazards and controls, including the limitations of protective clothing and equipment relevant to the work process cleaning, care and storage of equipment and instrumentation used procedures and responsibility for reporting production and performance information environmental issues and controls relevant to the dispensing process, including waste/rework collection and handling procedures related to the process sampling and testing associated with process monitoring and control where relevant |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | Assessment must be carried out in a manner that recognises the cultural and literacy requirements of the assessee and is appropriate to the work performed. Competence in this unit must be achieved in accordance with food safety standards and regulations. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of ability to: weigh and measure materials to achieve required quantities start, operate, monitor and adjust dispensing equipment to achieve required quality outcomes take corrective action in response to typical faults and inconsistencies complete workplace records as required apply safe work practices and identify OHS hazards and controls apply food safety procedures to work practices. |
Context of and specific resources for assessment | Assessment must occur in a real or simulated workplace where assessee has access to: personal protective clothing and equipment work procedures, including advice on safe work practices, GMP, SOPs and environmental requirements information on equipment capacity and operating parameters dispensing schedule, batch instructions specifications, control points and processing parameters dispensing process and related equipment and services materials required for the dispensing process containers/bags, labelling and storage facilities sampling schedules and test procedures and equipment as required documentation and recording requirements and procedures cleaning procedures, materials and equipment as required. |
Method of assessment | This unit should be assessed together with core units and other units of competency relevant to the function or work role. Examples could be: FDFOP2004A Clean and sanitise equipment FDFOP2013A Apply sampling procedures MSL973001A Perform basic tests. |
Guidance information for assessment | To ensure consistency in one's performance, competency should be demonstrated on more than one occasion over a period of time in order to cover a variety of circumstances, cases and responsibilities, and where possible, over a number of assessment activities. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Policies and procedures | Work is carried out according to company policies and procedures, regulatory and licensing requirements, legislative requirements, and industrial awards and agreements |
Legislative requirements | Legislative requirements are typically reflected in procedures and specifications. Legislation relevant to this industry includes: relevant Good Manufacturing Practice (GMP) codes the Therapeutic Goods Act and/or other relevant legislation legislation covering environmental management, OHS, anti-discrimination and equal opportunity |
Workplace information | Workplace information may include: standard operating procedures (SOPs) specifications production/dispensing schedules and instructions batch/recipe instructions manufacturers' advice standard forms and reports |
Dispensing equipment | Dispensing equipment may include: scales pipettes calibrated measuring containers fume cabinets labels/printers and related dispensary instrumentation |
Raw materials | Raw materials may include: drugs of addiction classified as S8 |
Operation of equipment and processes | Operation of equipment and processes may require: the use of process control panels and systems |
Sectors
Unit sector | Pharmaceutical manufacturing |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.