Application
The unit involves the visual assessment of materials in a variety of work settings including forest environment, saw mill, wood chip mill, veneer mill. board/plywood mill, timber treatment plants, downstream processing of timber, forest products factory, forest products sales and service, horticultural, domestic, local council, emergency services environment The skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority |
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare for assessing | 1.1. Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to the visual assessment of materials are identified and followed 1.2. Work order is reviewed and clarified with appropriate personnel 1.3. Visual assessment processes are planned in line with site procedures 1.4. Type and quantity of material to be visually assessed is acquired from the storage location 1.5. Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations 1.6. Communication with others is established and maintained in line with OHS requirements |
2. Visually assess material | 2.1. Material requirements for storage or subsequent processing operations are selected 2.2. Characteristics and defects of material are visually assessed against industry standards 2.3. Defects are clearly marked for treatment or sawing in line with site requirements 2.4. Assessment outcomes and distribution problems are recorded and reported in line with workplace procedures |
3. Distribute material | 3.1. Material is directed and moved to storage or processing operations in line with site requirements 3.2. Sub-standard materials are rejected and disposed of in line with site requirements 3.3. On-site movement of material is monitored to ensure intended flow is achieved 3.4. Storage locations are labelled in line with site systems |
Required Skills
This describes the essential skills and knowledge and their level required for this unit |
Required skills |
Technical skills sufficient to use and maintain relevant tools, machinery and equipment; recognise and mark defects and sub-standard materials; assess materials to industry standards Communication skills and interpersonal techniques sufficient to interact appropriately with colleagues and others in the workplace Literacy skills sufficient to accurately record and report workplace information and maintain documentation Numeracy skills sufficient to estimate, measure and calculate time required to complete a task Problem solving skills sufficient to identify problems and equipment faults and demonstrate appropriate response procedures |
Required knowledge |
Applicable Commonwealth, State or Territory legislation, regulations, standards, codes of practice and established safe practices relevant to the full range of processes for visually assessing materials Environmental protection requirements, including the safe disposal of waste material Organisational and site standards, requirements, policies and procedures relevant to visually assessing materials Environmental risks and hazard prevention Methods of visual estimation and assessment, colour identification and tagging Typical material defects and characteristics Distribution processes for assessed materials Storage systems and labelling Established communication channels and protocols Problem identification and resolution strategies and common fault finding techniques Types of tools and equipment and procedures for their safe use and maintenance Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks Procedures for recording and reporting workplace information |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to provide evidence that they can visually assess materials |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of: following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to the visual assessment of materials following organisational policies and procedures relevant to the visual assessment of materials visual assessment of a full range of materials in readiness for storage and/or processing distribution of materials using designated equipment effective communication and safe work practices |
Context of and specific resources for assessment | Competency is to be assessed in the workplace or realistically simulated workplace Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context Assessment is to follow relevant regulatory or Australian Standards requirements The following resources should be made available: workplace location or simulated workplace materials and equipment relevant to undertaking work applicable to this unit specifications and work instructions |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge Assessment may be applied under project-related conditions (real or simulated) and require evidence of process Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances Assessment may be in conjunction with assessment of other units of competency The assessment environment should not disadvantage the candidate Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English Where the participant has a disability, reasonable adjustment may be applied during assessment Language and literacy demands of the assessment task should not be higher than those of the work role |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
OHS requirements: | are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include: personal protective equipment and clothing safety equipment first aid equipment fire fighting equipment hazard and risk control fatigue management elimination of hazardous materials and substances safe forest practices including required actions relating to forest fire manual handling including shifting, lifting and carrying |
Environmental requirements may include: | legislation organisational policies and procedures workplace practices |
Legislative requirements: | are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include: award and enterprise agreements industrial relations Australian Standards confidentiality and privacy OHS the environment equal opportunity anti-discrimination relevant industry codes of practice duty of care |
Organisational requirements may include: | legal organisational and site guidelines policies and procedures relating to own role and responsibility quality assurance procedural manuals quality and continuous improvement processes and standards OHS, emergency and evacuation procedures ethical standards recording and reporting requirements equipment use and maintenance and storage requirements environmental management requirements (waste disposal, recycling and re-use guidelines) |
Materials may include: | hardwood and softwood logs and timber boards panels veneer laminated veneer imported species native species recently felled or stored materials wood chips plywood particle board fibreboard medium density fibreboard |
Work order is to include: | instructions for the environmental monitoring of work and procedures instructions for the receipt/despatch and visual assessment of materials to/from the designated storage location or processing operations and may include: type size quantity environmental care requirements relevant to the work |
Appropriate personnel may include: | supervisors suppliers clients colleagues managers |
Assessment is to include: | visually assessing the quality of materials for characteristics, defects and imperfections and may include: measuring the amount of moisture contained in a log to determine if it falls within specifications for conversion and drying or other processing operations |
Storage locations may include: | storage racks storage bays bins stacks pallet boxes modularised storage components temporary stacking bays (stand, frame or ground) and may be divided into: standard product classification product designation size dimension stack number weight grade shelf life stock rotation position |
Equipment may include: | moisture meters lifting equipment for the movement of materials |
Communication may include: | verbal and non-verbal language constructive feedback active listening questioning to clarify and confirm understanding use of positive, confident and cooperative language use of language and concepts appropriate to individual social and cultural differences control of tone of voice body language |
Processing operations may include: | sawmilling panel production wood chipping pulp and paper production |
Defects may include: | water damage chips splits warp wane cupping shakes insect defects or attack resin pockets contamination burls cracks dry rot wet rot breakage from felling dents loose surface lifting coatings poor adhesion thin or missing coatings chipped edges surface bubbles pin holes grain angles gum veins loose or missing knots |
Treatment may include: | chemical treatment of materials to eradicate insect attack or other defects |
Sawing may include: | cutting out sections of the material (if practical) to retain good quality sections |
Records and reports may include: | product type size visual inspection labelling outcomes storage locations quality outcomes hazards incidents equipment malfunctions and may be: manual using a computer-based system or another appropriate organisational communication system |
Disposing of rejected sub-standard materials may include: | environmentally effective, efficient and safe waste management, recycling and re-use practices and guidelines |
On-site movement of material: | lifting equipment may include: fork lifts slings trolley jacks gantry cranes loaders assistance with lifting may include: the involvement of two or more personnel to lift materials manually or to guide the movement of mechanical equipment |
Sectors
Not Applicable
Competency Field
Core |
Employability Skills
This unit contains employability skills |
Licensing Information
Refer to Unit Descriptor