Application
The unit involves preparing for timber treatment operations in a forest products factory setting The skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan for treating | 1.1. Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to preparing for timber treatment operations are identified and followed 1.2. Work order is reviewed and checked with appropriate personnel 1.3. Type and quantity of timber to be treated and chemicals to be used are assessed and acquired from the storage location 1.4. Equipment is prepared for work requirements and checked for operational effectiveness in line with manufacturer's recommendations 1.5. Communication with others is established and maintained in line with OHS requirements |
2. Prepare for timber treatment | 2.1. Pre start-up checks are carried out on equipment in line with site requirements 2.2. Timber supply to the treatment process is monitored and maintained 2.3. Water requirements are identified and checked in line with organisational procedures and environmental requirements 2.4. Moisture content of timber is tested in line with organisational procedures 2.5. Preservative solution strength is checked and maintained for specified strength and volume in line with environmental requirements 2.6. Treated timber is safely handled and transferred to storage location 2.7. Timber treatment preparation processes and equipment faults are recorded and reported to the appropriate personnel 2.8. Chemicals are handled and stored in line with regulatory and environmental requirements, and stock levels reported 2.9. Treating area is kept clear of dust, shavings and debris in line with OHS requirements |
Required Skills
This describes the essential skills and knowledge and their level required for this unit |
Required skills |
Technical skills sufficient to use and maintain relevant tools, machinery and equipment; efficiently and safely prepare for timber treatment operations Communication skills and interpersonal techniques sufficient to interact appropriately with colleagues and others in the workplace Literacy skills sufficient to accurately locate, record and report information Numeracy skills sufficient to estimate, measure and calculate time required to complete a task Problem solving skills sufficient to review and accurately identify work requirements; identify problems and equipment faults and demonstrate appropriate response procedures |
Required knowledge |
Applicable Commonwealth, State or Territory legislation, regulations, standards, codes of practice and established safe practices relevant to the full range of processes for preparing for timber treatment operations Environmental protection requirements, including the safe disposal of waste material, the safe use and storage of chemicals, minimising carbon emissions and the cleaning of plant, tools and equipment Organisational and site standards, requirements, policies and procedures for preparing for timber treatment operations Environmental risks and hazards Timber treating procedures Handling of treated products and chemicals Methods of visual inspection Characteristics of timber and chemicals Storage systems and labelling Established communication channels and protocols Problem identification and resolution strategies and common fault finding techniques Types of tools and equipment and procedures for their safe use, operation and maintenance Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks Procedures for recording and reporting workplace information |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently prepare for timber treatment operations in line with organisational requirements |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of: following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to preparing for timber treatment operations following organisational policies and procedures relevant to preparing for timber treatment operations preparing for timber treatment operations in readiness for storage and processing |
Context of and specific resources for assessment | Competency is to be assessed in the workplace or realistically simulated workplace Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context Assessment is to follow relevant regulatory or Australian Standards requirements The following resources should be made available: workplace location or simulated workplace materials and equipment relevant to undertaking work applicable to this unit specifications and work instructions |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge Assessment may be applied under project-related conditions (real or simulated) and require evidence of process Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances Assessment may be in conjunction with assessment of other units of competency The assessment environment should not disadvantage the candidate Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English Where the participant has a disability, reasonable adjustment may be applied during assessment Language and literacy demands of the assessment task should not be higher than those of the work role |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
OHS requirements: | are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include: personal protective equipment and clothing safety equipment first aid equipment fire fighting equipment hazard and risk control fatigue management elimination of hazardous materials and substances safe forest practices including required actions relating to forest fire manual handling including shifting, lifting and carrying machine isolation and guarding |
Environmental requirements may include: | legislation organisational policies and procedures workplace practices |
Legislative requirements: | are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include: award and enterprise agreements industrial relations Australian Standards confidentiality and privacy OHS the environment equal opportunity anti-discrimination relevant industry codes of practice duty of care |
Organisational requirements may include: | legal organisational and site guidelines policies and procedures relating to own role and responsibility quality assurance procedural manuals quality and continuous improvement processes and standards OHS, emergency and evacuation procedures ethical standards recording and reporting requirements equipment use and maintenance and storage requirements environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines) |
Work order is to include: | instructions for the preparation of timber treatment operations and may include: timber supplies chemical supplies equipment set up instructions for the environmental monitoring of work and procedures environmental care requirements relevant to the work |
Appropriate personnel may include: | supervisors suppliers clients colleagues managers |
Timber may include: | native timber species imported timber species dressed timber in-the-rough timber stress and non-stress graded timber sleepers logs rounded poles beams laminated beams |
Treating | is the process of impregnating preservative solution filled with chemicals in to the timber to provide it with a durable resistance to weather and insect attack and may include: full cell modified cell empty cell double vacuum dip diffusion vat and sprays other processes developed by the enterprise and is to include: handling techniques for products and chemicals in line with OHS regulations and environmental laws |
Chemicals may include: | those specified by the enterprise and that follow regulatory requirements and may include: light organic solvents |
Storage locations may include: | storage racks storage bays bins stacks pallet boxes modularised storage components temporary stacking bays (stand, frame or ground) and may be divided into: standard product classification product designation size dimension stack number weight grade shelf life stock rotation position |
Equipment may include: | treaters vats ovens resin tanks effluent tanks and is to include: procedures for equipment lock-out such as protecting operators and co-workers from accidental injury by isolating the machine from the power source |
Communication may include: | verbal and non-verbal language constructive feedback active listening questioning to clarify and confirm understanding use of positive, confident and cooperative language use of language and concepts appropriate to individual social and cultural differences control of tone of voice body language |
Pre start-up checks | are conducted to ensure: equipment has been set-up correctly systems are performing accurately and operating to optimum performance |
Water may include: | stormwater contaminated water bore water recycled dam water town mains water |
Moisture content | is the amount of moisture maintained in timber or timber products after kiln drying or to avoid cracking and deforming in Australia generally ranges between 10% in warmer, more humid climates to 14% in cooler climates |
Preservative solution may include: | water-borne solutions oil-based solutions solvent-based solutions |
Records and reports may include: | treatment preparation requirements charge records product type size inspection grading outcomes storage locations quality outcomes hazards incidents equipment malfunctions and may be: manual using a computer-based system or other appropriate organisational communication system |
Sectors
Unit sector | No sector assigned |
Competency Field
Sawmilling and Processing |
Employability Skills
This unit contains employability skills |
Licensing Information
Refer to Unit Descriptor