Application
This unit involves cutting material to length and angle in a forest products factory setting The skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare for cutting | 1.1. Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to cutting material to length and angle are identified and followed 1.2. Work order is reviewed and checked with appropriate personnel 1.3. Type and quantity of material to be cut is acquired from the storage location 1.4. Equipment is selected appropriate to work order and checked for operational effectiveness in line with manufacturer's recommendations 1.5. Cutting list is interpreted in line with work order and site procedures 1.6. Material cutting patterns and saw set-up sequences are planned in line with site procedures 1.7. Communication with others is established and maintained in line with OHS requirements |
2. Cut material to length and angle | 2.1. Material is marked and stops set in preparation for cutting 2.2. Equipment and machinery are used in line with organisational procedures, manufacturer's instructions and environmental protection requirements 2.3. Cutting sequence and patterns are followed to produce the required quantity 2.4. Cuts are checked for length and angle within a set tolerance 2.5. Material with defects, incorrect cuts and off-cuts are disposed of in line with site procedures and environmental requirements 2.6. Processing and equipment faults are reported to the appropriate personnel 2.7. Material is safely stacked in a designated location in line with work order requirements |
3. Conduct operator maintenance | 3.1. Equipment lock-out procedures are followed in line with OHS legislation and site procedures 3.2. Saw blades are checked for blunt or damaged condition 3.3. Saw blades are removed and replaced in line with manufacturer's recommendations and used blades are disposed of in line with site procedures and environmental requirements 3.4. Saw area is kept clear of dust, off-cuts and debris in line with OHS and site requirements |
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Required Skills
This describes the essential skills and knowledge and their level required for this unit. |
Required skills |
Technical skills sufficient to use and maintain relevant tools, machinery and equipment and safely cut material to length and angle Communication skills and interpersonal techniques sufficient to interact appropriately with colleagues and others in the workplace Literacy skills sufficient to accurately locate, record and report information Numeracy skills sufficient to estimate, measure and calculate time required to complete a task and to calculate length and angle of material for cutting Problem solving skills sufficient to review and accurately identify work requirements, identify problems and equipment faults and demonstrate appropriate response procedures |
Required knowledge |
Applicable Commonwealth, State or Territory legislation, regulations, standards and codes of practice relevant to the full range of processes for cutting material to length and angle Environmental protection requirements, including the safe disposal of waste material, minimising carbon emissions and the cleaning of plant, tools and equipment Organisational and site standards, requirements, policies and procedures for cutting material to length and angle Environmental risks and hazards Characteristics of timber and timber defects Cutting patterns and sequences Saw blade condition assessment Industry standard cross-sections and lengths Storage systems and labelling Established communication channels and protocols Problem identification and resolution strategies and common fault finding techniques Types of tools and equipment and procedures for their safe use, operation and maintenance Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks Procedures for recording and reporting workplace information |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently cut materials to length and angle within organisational requirements |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements of this unit and include demonstration of: following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to cutting material to length and angle following organisational policies and procedures relevant to cutting material to length and angle effectively communicating and following safe work practices cutting material to length and angle in line with the work order and within prescribed organisational tolerances conducting operator maintenance on a docking saw stacking batches of cut material in line with organisational requirements and OHS regulations |
Context of and specific resources for assessment | Competency is to be assessed in the workplace or realistically simulated workplace Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context Assessment is to follow relevant regulatory or Australian Standards requirements The following resources should be made available: workplace location or simulated workplace materials and equipment relevant to undertaking work applicable to this unit specifications and work instructions |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge Assessment may be applied under project-related conditions (real or simulated) and require evidence of process Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances Assessment may be in conjunction with assessment of other units of competency The assessment environment should not disadvantage the candidate Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English Where the participant has a disability, reasonable adjustment may be applied during assessment Language and literacy demands of the assessment task should not be higher than those of the work role |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
OHSrequirements: | are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include: personal protective equipment and clothing safety equipment first aid equipment fire fighting equipment hazard and risk control fatigue management elimination of hazardous materials and substances manual handling including shifting, lifting and carrying |
Environmental requirements may include: | legislation organisational policies and procedures workplace practices |
Legislative requirements: | are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include: award and enterprise agreements industrial relations Australian Standards confidentiality and privacy OHS the environment equal opportunity anti-discrimination relevant industry codes of practice duty of care |
Organisationalrequirements may include: | legal organisational and site guidelines policies and procedures relating to own role and responsibility quality assurance procedural manuals quality and continuous improvement processes and standards OHS, emergency and evacuation procedures ethical standards recording and reporting requirements equipment use and maintenance and storage requirements environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines) |
Work order is to include: | instructions for the cutting and despatch of timber and timber products from the work site and may include: type size length angle quantity grade instructions for the environmental monitoring of work and procedures environmental care requirements relevant to the work |
Appropriate personnel may include: | supervisors suppliers clients colleagues managers |
Material may include: | native timber species imported timber species dressed timber in-the-rough timber stress and non-stress graded timber preservative treated timber medium density fibreboard laminated veneer chipboard fibreboard and other manufactured board products coated and/or treated timber products beams or laminated beams |
Storage locations may include: | storage racks storage bays bins stacks pallet boxes modularised storage components temporary stacking bays (stand, frame or ground) and may be divided into: standard product classification product designation size dimension stack number weight grade shelf life stock rotation position |
Equipment may include: | measuring equipment power operated manually controlled docking and trimming saws where the cutting angle is controlled relative to the board guides and clamps saws with adjustable angle saws with one blade radial arm saws table saws bench saws saws with automatic feed and is to include: procedures for saw lock-out, ie protecting operators and co-workers from accidental injury by isolating the machine from the power source |
Cutting patterns and saw set-up sequences are to include: | single and compound angles requiring one or two cutting passes |
Communication may include: | verbal and non-verbal language constructive feedback active listening questioning to clarify and confirm understanding use of positive, confident and cooperative language use of language and concepts appropriate to individual social and cultural differences control of tone of voice and body language |
Tolerances | are a set limit for cutting over or under the required length within a set margin of acceptance usually + or - 0.5 mm or in line with order or organisational requirements |
Defects may include: | warp wane cupping shakes insect defects knots resin pockets |
Disposing of may include: | recycling material with defects, incorrect cuts and off-cuts re-using material with defects, incorrect cuts and off-cuts |
Stacking may include: | preparing for transport categorising in common size, length and angle marking lots in line with work order and site requirements locating so as not to block access or passage |
Sectors
Unit sector | No sector assigned |
Competency Field
Timber Manufactured Products and Timber Merchandising |
Employability Skills
This unit contains employability skills |
Licensing Information
Refer to Unit Descriptor