Application
Technicians or lineman installers whose work involves cut over of new customer premises systems and equipment apply the skills and knowledge in this unit. They may install or upgrade an existing customer installation to include applications in emerging technologies, including internet protocol (IP) based equipment, RFID units, IP security and computer networking. This unit applies to indoor and outdoor installation within customer premises and may be a domestic, commercial or industrial installation. |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare the system and equipment cut over | 1.1. Obtain relevant legislation, codes, regulations and standards 1.2. Scope the work by obtaining project plan from appropriate personnel and arrange for site access to comply with security arrangements 1.3. Notify appropriate personnel of identified safety hazards at the worksite 1.4. Determine cable route and type of cable and equipment from project plan and identify and avoid other services 1.5. Obtain plant, tools and safety equipment and material to perform tasks safely and efficiently 1.6. Prepare an implementation plan with cut over tasks based on identified nature of job and seek customer approval 1.7. Notify customer and network carrier of proposed cut over details and arrange for customer representation |
2. Cut over the system or equipment into service | 2.1. Perform cut over tasks and connect network facilities as with approved plan following occupational health and safety (OHS) and environmental requirements for the given work 2.2. Test all cable connections, equipment and facilities as instructed in technical manuals and specifications 2.3. Evaluate test results to ensure proper system operation and performance and rectify if required |
3. Complete project documentation | 3.1. Record test results for future reference and complete reports on cut over installation and design amendments according to enterprise requirements 3.2. Recover obsolete materials and equipment and return to appropriate point for disposal 3.3. Restore site according to the requirements of enterprise or approving authority and to customer satisfaction 3.4. Notify appropriate personnel of job completion and obtain sign off |
Required Skills
Required skills |
analytical skills to evaluate test results communication skills to liaise with internal and external personnel on technical and operational matters literacy skills to interpret technical documentation, such as equipment manuals and specifications numeracy skills to take and analyse measurements planning and organisational skills to: organise and maintain equipment scope work and develop implementation plan for cut over project safety awareness skills to: apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities select and use required personal protective equipment conforming to industry and OHS standards task management skills to work systematically with required attention to detail and adherence to all safety requirements technology skills to: perform fault clearance use diagnostic equipment use hand and power tools |
Required knowledge |
cabling types, connectors and cabling structures legislation, codes of practice and other formal agreements that impact on the work activity manufacturer's requirements for safe operation of equipment overview knowledge of customer premise equipment specific OHS requirements relating to the activity and site conditions test methods and performance requirements, including features and operating requirements of test equipment typical issues and challenges that occur on site |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of the ability to: read and interpret plans develop and implement a cut over work plan install customer premises equipment configure and test systems and equipment apply relevant regulations and standards. |
Context of, and specific resources for assessment | Assessment must ensure: sites where installation of systems and equipment involving cut over may be conducted use of installation equipment currently used in industry relevant regulatory and equipment documentation that impact on work activities. |
Methods of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: direct observation of the candidate performing cut over of systems and equipment review of plans and reports completed by the candidate outlining system and equipment cut over and test results oral or written questioning to assess knowledge of planning, types of systems and issues associated with cut over. |
Guidance information for assessment | Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example: ICTCBL2068A Install telecommunications service to a building ICTCBL3067A Modify and cut over cable. Aboriginal people and other people from a non-English speaking background may have second language issues. Access must be provided to appropriate learning and assessment support when required. Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed. In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. Where applicable, physical resources should include equipment modified for people with special needs. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Relevant legislation, codes, regulations and standards may include: | Australian Communications Industry Forum (ACIF) standards and codes appropriate licences: crane EWP forklift winch AS Communications Cabling Manual (CCM) AS/NZS 3000:2007 AS/NZS 3080:2003 AS/NZS 3084:2003 AS/NZS 3085.1:2004 AS/NZS IEC 61935.1:2006 AS/NZS IEC 61935.2:2006 AS/NZS ISO/IEC 14763.3:2007 AS/NZS ISO/IEC 15018:2005 AS/NZS ISO/IEC 24702:2007 cabling security codes and regulations Environmental Protection Acts ISO Draft 11801 (International) OHS regulated or industry codes of practice and include appropriate ACMA standards relevant Institute of Electrical and Electronics Engineers (IEEE) standards road and traffic control legislation and codes technical standards AS/ACIF S008:2006 and AS/ACIF S009:2006. |
Appropriate personnel may be: | consultant project engineer site supervisor. |
Safety hazards may refer to: | access points that may contain: hazardous light (non-visible laser) radio frequency (RF) emission contact with remote power feed electrical supply and areas of earth potential rise (EPR) that require mandatory separation from communications cable hazardous conduit as according to AS 1345: 1995 conduit colours associated with a hazardous service unsafe support structures: condemned poles visible signs of decay or stress unsafe weather: heavy rains high winds severe heat or cold thunderstorms. |
Cable may include: | coaxial data cabling distribution cable lead-in cable multipair copper optical fibre radio feeder. |
Equipment may include: | cable TV (CATV) unit internet protocol TV (IPTV) unit network equipment: data switch gateway router server private automatic branch exchange (PABX) pay TV unit RFID unit security panel wireless access point. |
Other services may include: | availability and suitability of existing cabling trays and fixing systems fire sprinkler systems gas and water mains high voltage (HV) power. |
Plant, tools and safety equipment may include: | plant: elevated platform vehicle ladders scissor lifts wire raising tool (insulated) safety equipment: flashing lights gas and other hazard detection equipment personal protective clothing: earmuffs fall arrest systems gloves head protection kneepads masks protective suits safety boots safety glasses safety barriers trench guards warning signs and tapes test equipment: cable tester continuity tester LAN Cat tester network analyser passive optical network (PON) meter protocol analyser tools: auger fixing brackets spanner. |
Cut over tasks may include: | cable jumpering of distribution frames installing new cable and equipment job preparation for cut over activity loading of new software saving and backing up existing system configurations splicing new optical fibre. |
Cut over details may include: | back up support from vendor or supplier contingency plan date, time and duration nature and type of work involved request for customer representation. |
OHS and environmental requirements may relate to: | decommissioning and isolating worksite and lines prior to commencement identifying other services, including power and gas personal protective clothing: earmuffs gloves: leather plastic rubber head protection kneepads masks protective suits safety boots safety glasses safety harness safety line safe working practices, such as the safe use and handling of: asbestos chemicals materials tools and equipment work platforms safety equipment: flashing lights gas and other hazard detection equipment safety barriers trench guards warning signs and tapes witches hats special access requirements suitable light and ventilation environmental considerations: clean-up protection stormwater protection waste management. |
Test may include: | ability to make and receive a call connectivity end to end performance test programme checks qualitative test software diagnostics toll and metering functions traffic flow. |
Sectors
Unit sector | Telecommunications |
Competency Field
Cabling |
Employability Skills
This unit contains employability skills. |
Licensing Information
Refer to Unit Descriptor