- LMFFM2001B - Use furniture making sector hand and power tools
LMFFM2001B
Use furniture making sector hand and power tools
Prerequisites
Nil | ||
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Identify hand and power tools | 1.1. Types of hand and power tools and their functions identified 1.2. Workplace health and safety requirements, including personal protection needs, are observed throughout the work 1.3. Sources of power supply recognised |
2. Select hand tools | 2.1. Hand tools selected are consistent with needs of the job 2.2. Selected hand tools are checked for serviceability and safety and any faults reported to supervisor 2.3. Equipment is selected to hold or support material for hand tools application where applicable |
3. Use hand tools | 3.1. Material is located and held in position for hand tool application 3.2. Hand tools are safely and effectively used according to their intended use 3.3. Hand tools are safely located when not in immediate use |
4. Select power tools | 4.1. Power tools are selected consistent with needs of the job in accordance with conventional work practice 4.2. Power tools are visually checked for serviceability and safety in accordance with OH&S requirements and any faults reported to supervisor 4.3. Equipment is selected to hold or support materials for power tool application as applicable |
5. Use power tools | 5.1. Material is located and held in position for power tool application as applicable 5.2. Power tools are safely and effectively used in application processes 5.3. Power tools are safely located when not in use |
6. Clean up work area and tools | 6.1. All tools are cleaned, maintained and stored 6.2. Equipment is cleaned, maintained and stored 6.3. Work area is cleared and waste removed |
Required Skills
|
Required skills |
collect, organise and understand information related to hand and power tools, work orders, maintenance systems and safety procedures communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems plan and organise activities, including the preparation and layout of the worksite to avoid any back tracking, workflow interruptions or wastage work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity use mathematical ideas and techniques to correctly complete measurements and estimate material requirements use pre-checking and inspection techniques to anticipate problems, avoid reworking and avoid wastage use workplace technology related to the operation and maintenance of hand and power tools |
Required knowledge |
types, characteristics, uses, limitations and maintenance requirements of hand tools commonly used in furniture production types, characteristics, uses, limitations and maintenance requirements of power tools commonly used in furniture production workplace safety requirements and OHS legislation workflow within the workplace |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Critical Aspects of Evidence | Locate and apply relevant information related to hand and power tools Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment Follow work instructions, operating procedures and inspection practices to: minimise the risk of injury to self or others prevent damage to goods, tools, equipment or products maintain required production output and product quality Adopt and carry out correct procedures prior to and during use of the range of hand and power tools stipulated in the range statement Carry out operator maintenance on hand and power tools, including the grinding of: chisels hard plane blades or irons drill bits Work effectively with others Modify activities to cater for variations in workplace contexts and environment |
Resource Implications | Furniture making sector hand and power tools. Materials used in the manufacturing and/or installation of furnishing products. |
Method of Assessment | Assessment should be by direct observation of tasks and questioning on underpinning knowledge. Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts. Assessment may be in conjunction with assessment of other relevant units of competency. |
Context of Assessment | Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Hand tools for furniture making are to include, but not be limited to: | hand planes chisels hand saws spokeshave hammer mallet marking-out tools files rasps scraper screwdrivers and hand drill |
Power tools for furniture making are to include, but not be limited to: | drop saw circular power saw planer drill jig saw router trimmer biscuit machine brad/nail and staple gun and sanders |
Unit scope | Work requires individuals to demonstrate skill, accuracy and dexterity in the application of tools to perform work tasks which should include dressing materials, cutting joints, finishing surfaces, cutting straight and compound angles, jointing materials, edge trimming and the basic grinding of cutting tools |
Unit context | OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements |
Fault reporting | Reporting of faults in the operation of hand and power tools may be verbal or written |
Personal protective equipment | Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices |
Information and procedures | Workplace procedures relating to the use of tools and equipment Work instructions, including job sheets, cutting lists, plans, drawings and designs Workplace procedures relating to reporting and communication Manufacturers' specifications and operational procedures |
Sectors
Unit sector | Furniture Making |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.