Application
This unit supports the attainment of skills and knowledge required for competent workplace performance in leadlight and stained glass operations. The requirement to remove heritage leadlight and stained glass panels applies to an on-site environment and involves application of skills and knowledge at an artisan level. These skills and knowledge are to be used within the scope of the individual’s job and authority.
Prerequisites
Not applicable.
Elements and Performance Criteria
1 | Identify removal requirements | 1.1 | Applicable occupational health and safety (OHS), legislative and organisational requirements relevant to heritage leadlight and stained glass operations are verified and complied with |
1.2 | Purpose of the removal is established confirmed and clarified with appropriate personnel | ||
1.3 | Removal outcomes are identified and confirmed |
2 | Plan removal processes | 2.1 | Location of the leadlight and stained glass panel to be removed is identified and observed |
2.2 | Removal sequence is identified and a work plan is developed | ||
2.3 | Tools and equipment required for the removal are identified | ||
2.4 | Approval of removal plan is obtained as required by agreed procedures |
3 | Prepare for removal | 3.1 | Tools and equipment are assembled, positioned and checked prior to use to ensure they are appropriate for the removal, serviceable and in a safe condition |
3.2 | Supporting frames and storage materials are prepared and positioned | ||
3.3 | Plans and other documents are assembled and positioned to allow for confirmation of the panel structure and placement | ||
3.4 | Photographs are taken of the panel for later reference |
4 | Remove the panel | 4.1 | Supporting frames are secured to the panel |
4.2 | Panel structural supports are removed and stored | ||
4.3 | Panel is removed and placed in the storage area or crated for transport | ||
4.4 | Structural damage is identified and noted |
5 | Finalise and report on the removal | 5.1 | Removed panel is inspected |
5.2 | Tools and equipment are removed | ||
5.3 | Removal area is cleaned and rubbish disposed of | ||
5.4 | Removal report is prepared and provided |
Required Skills
Required skills include: collecting, organising and understanding materials technology and information related to heritage leadlight and stained glass using communication skills to the level required to confirm work requirements and specifications; communicate effectively regarding work requirements with supervisors, other workers and customers; report work outcomes and problems; and relate to people from a range of social, cultural and ethnic backgrounds, and of varying physical and mental abilities using literacy skills to the level required to understand information related to work orders, including common industry terminology, plans and safety procedures; prepare reports; and interpret technical information and specifications maintaining quality records related to heritage leadlight and stained glass working with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity identifying, anticipating and responding to faults in heritage leadlight and stained glass recognising and responding to circumstances outside instructions or personal competence planning and organising activities, including the preparation and layout of own worksite, and the obtaining and use of tools and materials to avoid any backtracking, work flow interruptions or wastage using mathematical ideas and techniques to correctly complete measurements, calculate area and volume, and estimate work and material requirements clarifying and confirming work instructions planning own work within the given task parameters accepting responsibility for given tasks setting, monitoring and satisfying personal work goals maintaining current knowledge of tools and materials maintaining current knowledge of heritage leadlight and stained glass seeking learning opportunities using workplace technology related to the removal of heritage leadlight and stained glass components, including computers, measuring devices and recording systems |
Required knowledge includes: state or territory OHS legislation, regulations, standards and codes of practice relevant to the full range of processes for leadlight and stained glass operations leadlight and stained glass panels construction and repair terminology and techniques the principles and guidelines of the Burra Charter, the Australia International Council on Monuments and Sites (ICOMOS) Charter for Places of Cultural Significance organisational and site standards, requirements, policies and procedures for the removal of heritage leadlight and stained glass panels types of glass and other materials, historically used in the leadlight and stained glass industry, their characteristics, properties, uses and limitations heritage requirements specific to leadlight and stained glass engineering aspects of supporting leadlight and stained glass panels during the removal process established communication channels and protocols problem identification and resolution for heritage leadlight and stained glass storage systems and labelling procedures for the recording, reporting and maintenance of workplace records and information appropriate mathematical procedures for estimation and measurement |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors must be satisfied that the candidate can competently and consistently: read and interpret work/job specifications identify and interpret heritage legislation as it applies to leadlight and stained glass panels identify historical leadlight and stained glass panel construction methods identify framing, structural and construction techniques relevant to leadlight and stained glass panels identify removal methodologies remove a heritage leadlight and stained glass installation and store it to meet conservation requirements comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for the removal of heritage leadlight and stained glass panels communicate effectively and work safely with others in the work area. |
Context of, and specific resources for assessment | The application of competency is to be assessed in the workplace or realistically simulated workplace. Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian Standard requirements. The following resources should be made available: workplace location or simulated workplace materials and equipment relevant to the removal of heritage leadlight and stained glass panels to meet conservation requirements specifications and work instructions. |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package. Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge. Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application. Assessment may be applied under project-related conditions (real or simulated) and require evidence of process. Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances. Assessment may be in conjunction with assessment of other units of competency. |
Guidance information for assessment |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
OHS requirements | Commonwealth, state or territory legislation and regulations, organisational safety policies and procedures. Requirements may include, but are not limited to: the use of personal protective equipment and clothing fire fighting equipment first aid equipment hazard and risk control and elimination of hazardous materials and substances manual handling, including lifting and carrying |
Legislative requirements | applicable legislation from all levels of government that affect organisational operation. Requirements may include, but are not limited to: award and enterprise agreements industrial relations Australian Standards confidentiality and privacy OHS requirements the environment equal opportunity anti-discrimination relevant industry codes of practice duty of care and heritage |
Organisational requirements may include, but are not limited to: | legal, organisational and site guidelines, policies and procedures relating to own role and responsibility quality assurance procedural manuals quality and continuous improvement processes and standards OHS procedures emergency and evacuation ethical standards recording and reporting access and equity principles and practices equipment use, maintenance and storage environmental management (waste disposal, recycling and reuse guidelines) |
Appropriate personnel may include, but are not limited to: | clients architects engineers construction supervisors members of heritage committees government agencies other specialist artisans, such as stonemasons |
Removal outcomes may include, but are not limited to: | the requirement to dismantle, move and store leadlight or stained glass panels prior to any conservation work being undertaken |
Tools and equipment may include: | work benches ladders and scaffolding cameras magnifying glasses lights cranes forklifts general hand tools |
Supporting frames may include: | wooden or metal frames that support the leadlight and stained glass panels during the removal process |
Storage materials may include: | boxes frames, crates and other materials used to store and protect the leadlight and stained glass panel following removal and while being transported |
Plans and other documents | original architectural plans original drawings, cartoons, cut lines of the glass panel historical photographs, charcoal rubbings and sketches |
Removal is the requirement to: | dismantle the panel without further damage as it is being removed |
Removal report | the client or other bodies and may include such aspects as: the extent of any damage to the surrounding building or fixture any damage to the panel any recommendations as to future requirements |
Sectors
Leadlight and stained glass
Employability Skills
This unit contains employability skills.
Licensing Information
Not applicable.