Application
This unit involves the skills and knowledge required to carry out calculations related to fuel consumption, fuel storage and engine performance that conform to accepted engineering tolerances. It includes calculating fuel consumption and storage and completing calculations related to engine performance. This unit applies to people working in the maritime industry in the capacity of: Chief Engineer on vessels with inboard engines less than 1500 kW within the exclusive economic zone (EEZ) Second Engineer on vessels with inboard engines less than 3000 kW within the EEZ Chief or Second Engineer on vessels with outboard engines with unlimited propulsion power within the EEZ assistant under the direct supervision of the chief engineer worker in the engine room of a vessel less than 80 metres in length with propulsion power less than 3000 kW. Legislative and regulatory requirements are applicable to this unit. This unit is one of the requirements to obtain Australian Maritime Safety Authority (AMSA) certification as a Marine Engine Driver Grade 1 Near Coastal, as defined in the National Standard for Commercial Vessels (NSCV) Part D. |
Elements and Performance Criteria
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. | ||
Information required for calculations related to fuel consumption and storage is obtained from relevant sources | |||
Calculations are completed to accepted working tolerances | |||
Results of calculations are verified | |||
Results of calculations are applied to managing fuel, as required | |||
Information required for calculations related to engine performance is obtained from relevant sources | |||
Calculations are completed to accepted working tolerances | |||
Results of calculations are verified | |||
Results of calculations are applied to managing engine performance, as required |
Evidence of Performance
Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include: calculating: area and circumference of a circle consumption of fuel and lubricating oil for a particular voyage, using quantity in litres and mass in tonnes and specified regular shaped tanks distances covered hourly fuel and lubricating oil consumption mechanical advantage, load, force and moments remaining steaming times and engine performance specific fuel consumption, power, speed and range stress, strain and safe working load (SWL) tank capacities and pumping capacities for tank filling and emptying velocity ratio and efficiency of simple machines volume and capacity of regular shaped tanks calculations fuel consumption and storage: using calibration tables to measure quantities in tanks using relative density/specific gravity to convert quantity in litres and volume to mass converting: fractions to decimals units to multiples of base units. |
Evidence of Knowledge
Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of: area and circumference of a circle calibration tables common International System of Units (SI), such as kilogram, tonne, Newton, Newton metre, Pascal, joule, watt and metre relationship between theoretical vessel speed, propeller pitch and revolutions per minute (r.p.m.) terminology of: material technology simple levers volumes of regular shaped tanks work health and safety (WHS)/occupational health and safety (OHS) requirements and work practices. |
Assessment Conditions
Assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment. As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment. Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate. Practical assessment must occur in a workplace, or realistic simulated workplace, under the normal range of workplace conditions. Simulations and scenarios may be used where situations cannot be provided in the workplace or may occur only rarely, in particular for situations relating to emergency procedures and adverse weather conditions where assessment would be unsafe, impractical or may lead to environmental damage. Resources for assessment must include access to: applicable documentation, such as legislation, regulations, codes of practice, workplace procedures and operational manuals tools, equipment, machinery, materials and personal protective equipment (PPE) currently used in industry. |
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency. |
Range Statement
Range is restricted to essential operating conditions and any other variables essential to the work environment. |
Sectors
Not applicable. |
Competency Field
L - Marine Engineering |