Application
This unit of competency covers the skills and knowledge required to comply with work health and safety (WHS) regulations and work safely in aircraft maintenance areas. It requires application of WHS practices relevant to aviation maintenance workplaces in order to ensure own safety and that of others in the workplace.
Workplaces include the flight line or tarmac, hangars and workshops. Maintenance activities include all scheduled and unscheduled maintenance on fixed or rotary wing aircraft and on the components thereof. Work may be performed individually or as part of a team.
The unit is used in workplaces that operate under the airworthiness regulatory systems of the Australian Defence Force (ADF) and the Civil Aviation Safety Authority (CASA).
Where a CASA licensing outcome is sought this unit forms part of the CASA requirement for the granting of the chosen maintenance certification licence under Civil Aviation Safety Regulation (CASR) Part 66, in accordance with the licensing provisions in the Companion Volume Implementation Guide.
Elements and Performance Criteria
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. | ||
1. | Interpret safe work practices | 1.1 | Relevant regulatory and enterprise policies and procedures that identify the requirements for conduct of safe work are interpreted and understood |
1.2 | Workplace housekeeping measures are identified in accordance with standard enterprise procedures | ||
1.3 | Use of personal protective equipment (PPE) is identified and understood and maintenance measures are interpreted and understood according to regulatory and enterprise procedures | ||
1.4 | Safety signs and symbols are interpreted and understood, and their directions observed in accordance with enterprise and safety requirements | ||
2. | Interpret reporting procedures for workplace hazards | 2.1 | Workplace hazards are correctly identified and reporting procedures interpreted and understood according to standard enterprise procedures |
3. | Interpret emergency procedures | 3.1 | Method of contacting the appropriate personnel and emergency services in the event of an accident is appropriate to enterprise requirements |
3.2 | Emergency and evacuation procedures are interpreted and understood to ensure safe conduct of personnel according to enterprise procedures | ||
3.3 | Use of emergency equipment is correctly identified to comply with regulatory or enterprise procedures |
Evidence of Performance
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:
correctly interpreting WHS regulations, instructions and procedures relevant to the requirements for conduct of safe work listed in the Range of Conditions
recognising and adhering to aerospace industry signage, including aircraft systems plumbing markings
recognising and reporting to designated personnel hazardous situations in the workplace
risk assessment and control
selecting appropriate PPE for the maintenance activity being undertaken
correct interpretation of enterprise and regulatory emergency procedures
correct identification and operation of enterprise/industry-specific workplace emergency equipment.
This unit must be related in its assessment and application to all other units. The relationship between general workplace WHS requirements, as included in enterprise procedures, and the relevant federal and/or state and territory legislation must be clearly linked.
Evidence of knowledge and skills associated with the application of WHS standards is required to supplement evidence of ability to interpret and apply specific safe practices in the workplace.
Evidence of Knowledge
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
the applicable sources of WHS requirements and procedures and their application in requirements for conduct of safe work as listed in the Range of Conditions
how to recognise and report hazardous situations in the workplace
methods of risk assessment and control
the preferred order of ways to control risks (known as the hierarchy of control)
work operations to control risks, e.g. permit to work systems, such as confined space entry and isolation procedures
how to determine requirements for PPE associated with maintenance activities
the correct selection and use of workplace emergency equipment
action to be taken in emergency situations.
Assessment Conditions
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is, the candidate is not in productive work, an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. Should a demonstration of skill application be necessary, the candidate must have access to all necessary tools, equipment, materials and relevant documentation. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency under routine supervision on at least one item from each of:
applying general duty of care under WHS legislation and common law
fluid and gas high and low pressure systems, including fluid handling (for example, hydraulic fluids, lubricants, compressed air, nitrogen and oxygen)
fuelling/defuelling and working on fuel systems
using and handling chemicals, including solvents and battery acids
electrical systems, outlets and leads
noise hazard areas and aircraft safety zones
aircraft handling, towing, jacking, ground equipment operation and signage
personal protection
housekeeping and cleaning, waste disposal and FOD prevention practices and procedures.
Also, where applicable to the enterprise, the following:
confined space entry
aircraft strobe lighting
ionising, non-ionising radiation equipment
This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide. The relationship between general workplace WHS requirements, as included in enterprise procedures, and the relevant federal and/or state and territory legislation must be clearly linked.
Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Range Statement
This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. | ||
Requirements for conduct of safe work include: | Applying general duty of care under WHS legislation and common law Fluid and gas high and low pressure systems, including fluid handling (for example, hydraulic fluids, lubricants, compressed air, nitrogen and oxygen) Fuelling/defuelling and working on fuel systems Using and handling chemicals, including solvents and battery acids Electrical systems, outlets and leads Noise hazard areas and aircraft safety zones Aircraft handling, towing, jacking, ground equipment operation and signage Personal protection Housekeeping and cleaning, waste disposal and foreign object damage (FOD) prevention practices and procedures Confined space entry (where applicable to the enterprise) Aircraft strobe lighting (where applicable to the enterprise) Ionising and non-ionising radiation equipment (where applicable to the enterprise) | |
Relevant regulatory and enterprise policies and procedures are found in: | Commonwealth, State and Territory WHS Acts, regulations and codes of practice, including regulations and codes of practice relating to hazards present in the workplace or industry Organisational safety manuals that specify provisions relating to roles and responsibilities of health and safety representatives and/or WHS committees and provisions relating to WHS issue resolution Maintenance organisation manuals Procedures manuals Work instructions Relevant Defence instructions Civil Aviation Safety Regulations (CASRs) | |
Personal protective equipment (PPE) requirements are found in: | Material safety data sheets (MSDS) Safety manuals Procedures manuals Maintenance manuals Work instructions Relevant Defence instructions | |
Workplace hazard identification includes: | Checking equipment or the work area before work commences and during work Workplace inspections Housekeeping |
Sectors
Competency Field
Aviation maintenance