This unit requires application of hand skills and maintenance documentation to dismantle, inspect, maintain and assemble aircraft mechanical components or parts under the guidance of a qualified person.

Applications include components or parts either attached to the aircraft or in a workshop.

MEA101B

Interpret occupational health and safety practices in aviation maintenance

MEA103B

Plan and organise aviation maintenance work activity

MEA105B

Apply quality standards applicable to aviation maintenance processes

MEA107B

Interpret and use aviation maintenance industry manuals and specifications

MEA108B

Complete aviation maintenance industry documentation

MEA109B

Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance

ELEMENT

PERFORMANCE CRITERIA

1. Prepare to dismantle, inspect, maintain and assemble basic mechanical components or parts.

1.1. Remove and/or disassemble components in accordance with enterprise procedures, relevant maintenance documentation and qualified person guidance.

1.2. Maintenance and/or repair requirements as defined by the qualified person, enterprise procedures and the relevant maintenance documentation are understood.

1.3. Tagging and repair instructions are accurately specified in accordance with enterprise procedures and qualified person directions for parts requiring specialist repair.

1.4. Appropriate materials, tools, equipment and assembly or fabrication jigs where applicable are selected and prepared for the particular maintenance and repair requirements in accordance with enterprise procedures and relevant maintenance documentation

2. Maintain and/or repair mechanical components or parts.

2.1. Routine maintenance, repair or modification procedures are carried out, as approved by relevant manufacturers' bulletins or procedures, in accordance with required enterprise procedures and specifications.

2.2. Mechanical component parts are assembled within specified tolerances in accordance with enterprise procedures and the appropriate maintenance documents.

2.3. Where applicable and as required by the qualified person, assist in the final adjustment of components to confirm serviceability.

3. Complete maintenance/repair activities.

3.1. Required documentation is completed and processed in accordance with standard enterprise procedures.

3.2. Maintained/repaired or modified components are tagged, sealed and packaged within specified procedures.

Required skills

Look for evidence that confirms skills in:

application of relevant OH&S procedures

the use of relevant maintenance documentation, specifications and aircraft/component manuals to:

recognise state of serviceability and standard/routine repair requirements for the range of mechanical components listed in the Range Statement

identify requirements under the guidance of a qualified person and complete routine repairs and/or modifications

adjust components under qualified person guidance as required

where post-assembly testing is applicable, under guidance and in the training environment, set up components for testing and perform tests

Correctly tag, seal and package completed components

Required knowledge

Look for evidence that confirms knowledge of:

component operation at a basic level

standard/routine repair procedures and processes

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to dismantle, inspect, maintain and assemble aircraft mechanical components or parts under qualified person guidance while observing all relevant safety precautions.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The underlying skills inherent in this unit should be transferable across a range of maintenance and repair applications associated with aircraft components. It is essential that the relevant enterprise procedures are interpreted and applied to ensure quality and safety standards are achieved.

Evidence of transferability of skills and knowledge related to enterprise procedures for maintenance and repair is essential. This may be demonstrated through application across a number of different aircraft components. Ability to assess component serviceability under qualified person guidance and interpret parts requirements will be necessary before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.

A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the Unit of Competency are being achieved under qualified person guidance on a representative range of components or parts listed in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry .

Context of and specific resources for assessment

Competency should be assessed in the work environment or simulated work environment, using tools and equipment specified in maintenance documentation. It is also expected that general and special purpose tools found in most routine situations would be used where appropriate.

Method of assessment

Guidance information for assessment

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Work is undertaken:

Routine work

Routine work is carried out using basic operational knowledge and a defined range of skills ('routine' work is that which follows a customary or regular course of procedure).

Outcomes

Outcomes are achieved by applying known solutions chosen from a limited range of pre-determined options consistent with enterprise procedures. This includes accepting responsibility for own work in terms of quality of outcomes using pre-determined specifications of quality.

Maintain and/or repair/modify basic components

Maintain and/or repair/modify basic components such as cables, pulleys, chains, sprockets, gear drives, control rods, bellcranks and links.

Scope of work

Note that the scope of any repair or modification and the procedure to be followed will be provided by the qualified person, and be within the scope of the skills and knowledge included in the Unit of Competency MEA109B

Repair

Repair comprises replacement of parts such as eye-ends, tubes, bearings, and bushes

Maintain

Maintain involves cleaning, inspection for wear or damage and routine adjustment and lubrication where applicable in accordance with enterprise procedures

Work can relate to:

routine scheduled or unscheduled maintenance activities performed under qualified person guidance in accordance with enterprise procedures and applicable maintenance documentation

tasks performed either autonomously or as part of a team and under the guidance of a qualified person

Procedures and requirements

Refer to procedures specified by manufacturers, regulatory authorities or the enterprise

Unit sector

Aviation maintenance

This unit contains employability skills.