This unit applies to the operation of a range of automatic and semi-automatic sand moulding and core making machines in a foundry using a range of moulding media such as green sand, shell sand, chemically bonded media.

Band: A

Unit Weight: 8

ELEMENT

PERFORMANCE CRITERIA

1. Determine job requirements

1.1. Instructions and specifications are interpreted correctly.

2. Conduct pre-operational checks

2.1. Pattern/core box is selected and inspected to specifications and cleaned as required. Damaged patterns/core boxes are identified for repair or replacement to standard operating procedures.

2.2. Pattern/core box is set up in bolster and core box according to standard operating procedures.

3. Operate machine to produce mould/cores

3.1. Appropriate moulding media is selected to produce mould and core to specification.

3.2. Moulds/cores are filled to specification according to standard operating procedures.

3.3. Machine is operated in accordance with standard operating procedures.

3.4. Machine is unloaded safely to standard operating procedures.

3.5. Moulds/cores are stripped, inspected and painted as required according to standard operating procedures.

4. Assemble moulds/cores

4.1. Moulds/cores are dried, glued and vented as required to specification and closed in accordance with standard operating procedures.

4.2. Runner bush is set to specification as required.

5. Clean and restore work area

5.1. All material/debris is cleared and work site is cleaned and left in a safe state.

5.2. Unwanted treated sand is disposed of according to standard operating procedures.

Required skills

Look for evidence that confirms skills in:

interpreting written instructions and specifications

preparing and installing pattern or core box

programming operating parameters

operating and monitoring moulding and core making machines

assembling moulds and cores

inserting cores (in moulding machines)

inserting runner bushes

maintaining integrity of mould or core

maintaining integration of interrelated metal melting, core making and sand mixing processes

maintaining operational capability of moulding and core making machines

entering routine and familiar information onto proformas and standard workplace forms

Required knowledge

Look for evidence that confirms knowledge of:

characteristics and applications of sand and binding agents

machine operation, fault identification, analysis and rectification procedures

core selection and loading procedures

use and application of personal protective equipment

safe work practices and procedures

hazards and control measures associated with operating sand moulding and core making machines

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to operate a sand moulding and core making machine.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with operation of sand moulding and core making machines or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Moulding media

Shell, chemically bonded or green sand as appropriate for the particular machine

Machine

Automatic, semi-automatic, moulding and core making

Unit sector

Casting and moulding

This unit contains employability skills.