Application
This unit of competency defines the skills and knowledge required to set a range of non-numerical control (NC) and non-computer numerical control (CNC) equipment, including manual, semi-automatic and automatic machines.
Where setting skills for NC/CNC is required unit MEM07015 Set computer controlled machines and processes should also be selected.
Where setting automated assembly processes is required unit MEM07040 Set multistage integrated processes should also be selected.
Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.
Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Band: A
Unit Weight: 4
Elements and Performance Criteria
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. | ||
1 | Determine job requirements | 1.1 | Follow standard operating procedures (SOPs) |
1.2 | Comply with work health and safety (WHS) requirements at all times | ||
1.3 | Use appropriate personal protective equipment (PPE) in accordance with SOPs | ||
1.4 | Identify job requirements from specifications, job sheets or work instructions | ||
2 | Set machine | 2.1 | Set up machine in accordance with defined procedures |
2.2 | Adjust machine to meet specifications and operational requirements | ||
2.3 | Measure first-off samples for compliance with specifications | ||
2.4 | Identify worn or damaged tooling and change, as required | ||
2.5 | Instruct machine operator, if necessary, on sequencing settings and any required safety procedures | ||
Foundation Skills
This section describes those required skills (reading, writing, oral communication and numeracy) that are essential to workplace performance in this unit of competency.
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Range Statement
This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, accessibility of the item, and local industry and regional contexts) are included. | |
Machining operations include one (1) or more of the following: | removing metal bending rolling joining extruding pressing moulding and die casting on a range of materials, including metals, plastics and fibre |
Competency Field
Machine and process operations