This unit applies to the management and storage of enterprise-owned tooling, specialist tools and associated consumable items used in engineering applications and environments. This could include production manufacturing, specialist machining, maintenance and fabrication settings. Tooling may be permanent or disposable. The work would normally be undertaken in a specialist store or warehouse.

Engineering knowledge and drawing interpretation skills would often be required due to the specialised nature of engineering tools/tooling and should be accessed from appropriate units.

Band: A

Unit Weight: 4

Path 1

MEM11007B

Administer inventory procedures

MEM11011B

Undertake manual handling

MEM11013B

Undertake warehouse receival process

MEM12024A

Perform computations

ELEMENT

PERFORMANCE CRITERIA

1. Order tools/tooling

1.1. Tools/tooling requirements are identified and consolidated from order documentation, drawings, and liaison with trade and production personnel according to standard operating procedures.

1.2. Appropriate tools/tooling are identified from supplier catalogues and manuals, including correct size, hardness, quality etc.

1.3. Order is placed according to standard operating procedures.

2. Receive tool/tooling orders

2.1. Orders are received from main receival warehouse or direct from supplier according to standard operating procedures.

2.2. Orders are unpacked and stock placed in correct location.

2.3. Items are checked and confirmed against order.

2.4. Incorrect items are processed to standard procedures.

3. Maintain tooling

3.1. Tools/tooling are cleaned and protected as necessary.

3.2. Supplies are monitored to ensure maintenance of contingency stock.

4. Distribute tools/tooling

4.1. Tools/tooling are issued to users according to standard operating procedures.

4.2. Enterprise documentation procedures are followed.

4.3. Procedures against unauthorised use of tools/tooling are established and followed.

Required skills

Look for evidence that confirms skills in:

maintaining documentation

undertaking stock control

performing manual handling

packaging and storing engineering specialist tools and tooling

cleaning and maintaining engineering tools/tooling

interpreting specifications, data sheets, drawings, supplier catalogues and manuals for relevant tools/tooling information

checking and clarifying information

Required knowledge

Look for evidence that confirms knowledge of:

types and applications of engineering tooling and specialist engineering tools

methods of storing and protecting tools/tooling

ordering procedures

inventory systems

procedures for protecting store against unauthorised entry and use of tools/tooling

safe work practices and procedures

hazards and control measures associated with tool store activities

use and application of personal protective equipment

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to undertake tool store procedures in an engineering setting. Competency in this unit cannot be claimed until all prerequisites have been satisfied.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with undertaking tool store procedures or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Tools/tooling

Hand tools, cutting tips for lathes, mills and other machines for metal removal, grinding wheels, special steel etc.

Specialist tools include engineering power tools, specialised hand tools, mechanical and electro-mechanical devices (e.g. for lifting, clamping), measuring and marking equipment, templates, jigs etc.

Unit sector

Materials handling

This unit contains employability skills.