MEM23004A

Apply technical mathematics

MEM23006A

Apply fluid and thermodynamics principles in engineering

1

Establish scope of hydrodynamic system

1.1

Determine fluid systems and system components to be evaluated

1.2

Identify stakeholders to be consulted on evaluation tasks

1.3

Confirm that appropriate support, including technical and professional assistance, is available

1.4

Determine WHS and regulatory requirements, risk management and organisational procedures

1.5

Investigate sustainability implications of hydrodynamic applications

2

Apply principles and techniques required for evaluation of hydrodynamic system and components

2.1

Review features and functions of hydrodynamic system and components

2.2

Determine hydrodynamic principles and techniques required to evaluate system and select and optimise components

2.3

Determine appropriate analysis techniques, software and software validation techniques

3

Evaluate hydrodynamic system and components

3.1

Assess components and system compatibility with fluid properties

3.2

Assess suitability of pumps and pump performance in hydrodynamic system

3.3

Assess forces on bends and section changes in piping systems and confirm they are within specification

3.4

Assess hydrodynamic performance of components, such as fittings, valves and hoses

3.5

Assess open channel systems and optimise for required flow rates

3.6

Evaluate collar and cylindrical bearings subject to boundary, transitional and hydrodynamic lubrication

4

Report results

4.1

Record outcomes of evaluation

4.2

Provide documentation, such as calculations, component and system layouts, and functional diagrams

Required skills

Required skills include:

determining parameters and context of tasks

identifying WHS and regulatory requirements

identifying risk management and organisational procedures

reviewing sustainability implications, features and functions of hydrodynamic systems and components

identifying hydrodynamic principles and techniques, analysis techniques, software and software validation techniques

ensuring compatibility of units in calculations

evaluating components and system compatibility with fluid properties, pumps, turbines, piping forces, hydrodynamic performance of components, open channel systems, collar and cylindrical bearing lubrication

selecting equipment and instruments for use in evaluation considering properties and compatibility

reporting and documenting results of scoping, principles and techniques identification, evaluation of applications, calculations, component and system layouts, and functional diagrams

Required knowledge

Required knowledge includes:

WHS and regulatory requirements, codes of practice, standards, risk management and registration requirements

availability of professional and technical assistance for engineering specialisations

current options and tends in performance analysis software, including underpinning program techniques and software validation techniques

properties of fluids:

fluid types

relevant units of measurement

chemical properties

sustainability issues:

hydrodynamic energy, generation and consumption

environmental effects of manufacturing and use

fluid statics

fluid dynamics, including:

flow

velocity

viscosity

pressure

fluid power

hydrodynamic forces

hydrodynamic system components

head loss in pipes and fittings

pumping systems, including components and methods for determining efficiency

forces developed by flowing fluids

open channel flow

oiled bearings

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to evaluate hydrodynamic systems, including evaluation of system performance, selection of components and calculation of fluid force.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently:

determine parameters and context of evaluation task

determine WHS, regulatory requirements, risk management and organisational procedures

identify features, functions and components of a range of hydrodynamic systems

investigate and review sustainability implications, features and functions of hydrodynamic systems and components

apply correct hydrodynamic principles and techniques for particular hydrodynamic systems

evaluate components and systems to determine safety, efficiency and fitness for purpose

report and document results.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job then a simulated working environment must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the MEM05 Metal and Engineering Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application.

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is not only able to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Assessment may be in conjunction with assessment of other units of competency where required.

Guidance information for assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Hydrodynamic systems

Hydrodynamic systems include:

fluid vessels (e.g. static dams, tanks and pools, and vessel in dynamic applications)

pumping systems (e.g. industrial wash, fire prevention and irrigation)

turbines for hydro-electric power generation

components, such as fluid containers, ducts, pipes, valves, pumps, turbines and fluid measuring devices

open channels for liquid transfer

Sustainability

Sustainability is used to mean the entire sustainable performance of the organisation/plant, including:

meeting all regulatory requirements

conforming to all industry covenants, protocols and best practice guides

minimising ecological and environmental footprint of process, plant and product

maximising economic benefit of process plant and product to the organisation and the community

minimising the negative WHS impact on employees, community and customer

Appropriate licensed technical and professional assistance

Appropriate technical and professional assistance may include:

technical support and advice relating to elements which have intrinsic dangers, such as:

high pressure

energised fluid vessels

high temperatures and heat energy capacity

wiring with high current control voltages above extra low voltage

professional support for technologies, such as:

specialist electric motor drives and controllers

specialist materials, plastics, metal alloys and nano materials

special processes, foundry, alloy welding, heat treatment, sealing and fastening

WHS, regulatory requirements and enterprise procedures

WHS, regulatory requirements and enterprise procedures may include:

WHS Acts and regulations

relevant standards

codes of practice from Australian and overseas engineering and technical associations and societies

risk assessments

registration requirements

safe work practices

state and territory regulatory requirements applying to electrical work

Standards and codes

Standards and codes refers to all relevant Australian and international standards and codes applicable to a particular hydrodynamic system task

Unit sector

Engineering science