- MEM30024A - Participate in quality assurance techniques
MEM30024A
Participate in quality assurance techniques
Application
This unit applies to all fields of engineering. Skills are applied to working in teams and work is carried out under supervision. Band: 0 Unit Weight: 0 |
Prerequisites
Path 1 | Perform basic statistical quality control | |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Interpret and apply quality standards and procedures | 1.1. Quality standards and procedures are interpreted and applied to individual and teamwork in accordance with standard operating procedures. |
2. Monitor and report on quality | 2.1. Quality of all received, in-work and finished materials and products is monitored as required in accordance with standard operating procedures. 2.2. Designated process improvement tools are used either individually or in a team to identify and solve design, development and production quality problems. 2.3. Designated analytical tools are used to evaluate principal causes of process variation in consultation with the team or other subject experts. 2.4. Further action to improve quality is recommended, where required, using standard operating procedures. |
3. Assist in implementing approved improvement strategy or strategies | 3.1. Key indicators and performance measures are established and agreed in consultation with the team or other subject experts. 3.2. Process, product output is measured against key indicators in consultation with the team or other subject experts. 3.3. Steps are taken to lock in improvements in accordance with standard operating procedures. |
Required Skills
Required skills |
Look for evidence that confirms skills in: undertaking problem solving undertaking basic arithmetic calculations interpreting known data using standard texts and references undertaking simple report writing reading and interpreting engineering specifications |
Required knowledge |
Look for evidence that confirms knowledge of: the importance of quality the key principles of quality improvement programs the influence of variation use and application of Australian standards/ ISO 9000 etc. quality policy quality manuals quality procedures quality definitions purpose of quality audits simple sampling techniques and possible sources of sampling error and bias simple statistical tools problem solving techniques including: process flow charts, interpretation and construction of simple case cause and effect diagrams, fault trees etc. root cause analysis Pareto diagrams |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to participate in quality assurance techniques - basic. Competency in this unit cannot be claimed until all prerequisites have been satisfied. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts. |
Context of and specific resources for assessment | This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate. This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with participating in quality assurance techniques - basic, or other units requiring the exercise of the skills and knowledge covered by this unit. |
Method of assessment | Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials. |
Guidance information for assessment |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Quality standards and procedures | Includes quality programs such as TQC, six sigma etc., quality policy, quality manuals, ISO 9000 and associated quality standards |
Process improvement tools | Includes process flow charts, cause and effect diagrams, brainstorming sessions, Pareto diagrams, check sheets, run chart, scatter diagrams etc. |
Analytical tools | Can include statistical analysis, critical incident analysis, root cause analysis etc. |
Sectors
Unit sector |
Competency Field
Engineering technician |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not Applicable