Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Match fuels and additives to marine applications

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Select and use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Select fuels to match the engine or appliance

1.5

Consider alternative fuel applications

1.6

Select fuel additives and lubricants based on vessel/appliance use and manufacturer requirements

2

Identify fuel handling risk, precautions and regulatory requirements

2.1

Identify dangers of volatile fuel liquids and vapours

2.2

Identify precautions for minimising risks associated with volatile liquids in workplace procedures

2.3

Identify procedures to prevent build up of volatile vapours and gases

2.4

Identify regulatory requirements for refilling portable fuel containers

3

Identify safety and environmental requirements for fuel refill areas

3.1

Use correct locations for refuelling activities

3.2

Apply workplace strategies/procedures to limit danger from static electricity and other sources of ignition

3.3

Identify protection systems that provide physical barriers to minimise accidental collision with fuelling facilities and use to prevent spills entering drains or the water environment

3.4

Use appropriate ventilation

3.5

Identify signage for public safety needs and Hazchem requirements

3.6

Identify emergency stops and shut-off devices and describe activation methods

4

Refill fuel containers

4.1

Refill portable liquid fuel tanks and appliances

4.2

Refill gas cylinders

4.3

Refill on-board fuel tanks

4.4

Check fuel levels for each method of storage

4.5

Identify emergency procedures for leaks, spills and fire

4.6

Replace gas cylinders if required

5

Contain and clean up spills

5.1

Identify potential for spills

5.2

Follow procedures for notification of spills

5.3

Follow workplace procedures to contain spill and minimise any environment or safety dangers

5.4

Identify clean up equipment and use

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Fuels include one (1) or more of the following:

petrol (gasoline), including premixed two stroke fuel

diesel (distillate)

kerosene

methylated spirits

lighter fluid/white spirits

liquefied petroleum gas (LPG)

Appliances include one ((1) or more of the following:

stoves

refrigerators

heaters

lights

Replacement of gas cylinders includes the following:

turn off appliances and pilot light

vent gas lines in a safe manner after closing gas valves

leak test fittings after fitting cylinders

refit and adjust bottle restraining devices

following emergency procedures for leaks and fire

PPE includes one (1) or more of the following:

goggles/face shields

masks or respirators

gloves and appropriate clothes/garments

Contain spill includes one (1) or more of the following:

bunding and drain covers

chemical dispersal agents

absorptive materials

containment booms and portable bunding