- MSAPMOPS404A - Co-ordinate maintenance
MSAPMOPS404A
Co-ordinate maintenance
Application
Application of this unit
This competency applies to supervisors and technicians who are required to apply knowledge of equipment operating principles, service requirements and workplace production operations to the coordination of maintenance activities. The key factors are the coordination of maintenance activities to meet the objectives of restoring the plant/equipment condition, consistent with production requirements.
The technician will:
identify and plan maintenance work consistent with production requirements
interpret data and information on equipment
develop and monitor workplans for the maintenance activities
organise materials, consumables and personnel to meet the maintenance objectives
check tools, equipment, materials and output for conformity to job requirements
complete logs and reports.
Prerequisites
Prerequisites
This unit has no prerequisites.
Elements and Performance Criteria
ELEMENT ELEMENT | PERFORMANCE CRITERIA Performance Criteria describe the required performance needed to demonstrate achievement of the Element. Assessment of performance is to be consistent with the evidence guide. |
1. Plan maintenance. | 1.1 Develop work plans for scheduled routine maintenance activities. 1.2 Develop maintenance plans for unscheduled maintenance activities. 1.3 Source maintenance providers (internal/external). 1.4 Develop costings for maintenance work. 1.5 Implement measures to control identified hazards in line with procedures and duty of care. 1.6 Document and record required production interruptions, processes and procedures. 1.7 Obtain clearances for the maintenance work. |
2. Organise maintenance. | 2.1 Schedule maintenance activities, with reference to production requirements and availability of resources. 2.2 Review available maintenance expertise and arrange appropriate training and assessment where necessary. 2.3 Obtain approvals for maintenance schedule as necessary to coordinate with production requirements. |
3. Assemble maintenance requirements. | 3.1 Determine resources required (equipment, personnel and consumables) to meet maintenance schedule. 3.2 Locate and coordinate supply of consumables, equipment and expertise to meet maintenance schedule. 3.3 Purchase equipment, consumables and expertise as required. |
4. Complete maintenance. | 4.1 Complete maintenance schedule. 4.2 Make appropriate readings, measurements and recordings and compare to equipment, product and other relevant specifications. 4.3 Identify areas requiring further testing and recommend appropriate procedures to supervisory staff. 4.4 Make appropriate adjustments to the maintenance schedule. 4.5 Complete records as required, noting areas where changes to equipment operation or routine maintenance are required. |
Required Skills
This describes the essential skills and knowledge and their level required for this unit.
Application of knowledge and understanding of equipment operation, planning and maintenance practices sufficient to plan for maintenance requirements in standard and non-standard situations and then determine appropriate action which is consistent with operation guidelines is required.
Knowledge of the enterprise's procedures and relevant regulatory requirements along with the ability to implement them within appropriate time constraints and work standards.
Application of the knowledge of managing risks using the hierarchy of controls applied to the process. Application of approved hazard control, safety procedures and the use of PPE in relation to handling materials, equipment operation and clean up.
Knowledge as a basis for solving processing and material problems, including:
characteristics and capabilities of equipment, materials and processes used
functions and troubleshooting of internal components and their problems
routine and non-routine causes of equipment failures and the service conditions which may increase maintenance
urgency and timeliness factors in planning maintenance activities in relation to production requirements
proactive, predictive, preventative and reactive maintenance principles
implications of maintenance for production and work activities
source requirements for maintenance
safety procedures and the use of PPE in relation to handling materials, equipment operation and cleanup
the hierarchy of control including engineering controls.
Competence also includes the ability to:
identify factors in production schedules, time and resource requirements (including external sources) in scheduling maintenance activities
schedule maintenance functions in the most timely and cost effective manner
apply relevant agreements, codes of practice or other legislative requirements
ensure workplace is safe for maintenance activities.
Language, literacy and numeracy requirements
This unit requires the ability to read and interpret typical manufacturer specifications, equipment procedures, production schedules and material labels as provided to coordinators.
Writing is required to the level of completing workplace reports and proposals.
Numeracy is also required, eg analysing statistical information/historical data in the form of tables and graphs
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required skills and knowledge, the Range Statement and the Assessment Guidelines for this Training Package.
Overview of assessment
A holistic approach should be taken to the assessment.
Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
It is essential that competence is demonstrated in the ability to:
recognise potential situations requiring action
implement appropriate action.
Consistent performance should be demonstrated. For example, look to see that:
early warning signs of equipment in need of attention/with potential problems are recognised
planned work sequences are logical and conform with production schedules and work rosters
maintenance schedules for reactive, planned and proactive maintenance are coordinated based upon the most appropriate and cost effective method to ensure equipment reliability and optimum performance
plans are initiated and monitored, with activities modified for variations in workplace contexts and the environment, until final resolution has occurred.
Assessment method and context
It is preferred that assessment takes place in an industrial work environment.
Competence in this unit may be assessed:
on a processing plant allowing for operation under all normal and a range of abnormal conditions
in a situation allowing the generation of evidence of the ability to recognise, anticipate and solve problems
using a suitable simulation and/or a range of case studies/scenarios
through a combination of these techniques.
In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.
Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.
Specific resources for assessment
This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.
Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.
Range Statement
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.
Context
This competency applies to all work environments and sectors within the manufacturing industry. It does not include maintenance which would require trade level skills. It is not intended that this competency would cover performing maintenance which is carried on in a workshop.
This may include:
predictive and preventative operational maintenance
proactive maintenance
reactive maintenance.
Procedures
All operations are performed in accordance with procedures.
Procedures include all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.
Tools and equipment
This competency includes use of equipment and tools such as:
hand tools specific for the task
testing equipment
measuring and aligning equipment
computer equipment
relevant personal protective equipment.
Hazards
Typical hazards to be considered, include:
isolations of energy sources, motive power and process materials
manual handling of machinery components and the need for lifting devices
hot, cold or components containing dangerous materials
external hazards (eg traffic into a maintenance area)
Problems
Respond to/rectify 'non-routine problems' means 'apply known solutions to a variety of predictable problems'.
Typical process and product problems which may require maintenance, include:
equipment performance outside of specification or requirements
equipment breakdown
equipment wear and tear.
Variables
Key variables to be monitored include:
relationship of maintenance plan to production requirements
costs of maintenance
availability of materials and services
documentation and record keeping.
Data and Records
Typical information sources, observed data and plant records may include:
plant data
log sheets
production schedules
operational and performance reports
physical aspects such as noise, smell, feel and pressure
condition monitoring information
planned maintenance schedules
standard operating procedures
manufacturer instructions, specifications and service manuals
machine circuit diagrams for hydraulic/pneumatic and electrical/electronic circuits
plant description manuals.
Sectors
Not applicable.
Employability Skills
This unit contains employability skills.
Licensing Information
Not applicable.