- MSAPMSUP172A - Identify and minimise environmental hazards
MSAPMSUP172A
Identify and minimise environmental hazards
Application
Application of this unit
This competency is performed by all operators in all plants. It reflects the regulatory requirements and the industry's concern to operate in an environmentally friendly manner.
The operator will:
identify activities/materials likely to be an environmental issue
take the appropriate action on environmental issues as required.
Prerequisites
Prerequisites
This unit has no prerequisites.
Individual organisations may choose to add prerequisites and co-requisites relevant to their processes.
Elements and Performance Criteria
ELEMENT ELEMENT | PERFORMANCE CRITERIA Performance Criteria describe the required performance needed to demonstrate achievement of the Element. Assessment of performance is to be consistent with the Evidence Guide. |
1. Identify potential environmental threats. | 1.1 Recognise the type and severity of environmental threat posed by the materials and processes used for own work. 1.2. Identify ways materials used may enter the environment. 1.3. Identify sensitive features of the local environment and their impact on work practice and procedures. |
2. Identify workplace procedures and policies to minimise environmental threats. | 2.1 Identify workplace policy for environmental protection. 2.2. Identify in relevant standard operating procedures environmental protection measures appropriate for work. 2.3. Explain contact procedures for personnel involved in environmental response teams. 2.4. Recognise abnormal or unacceptable emission levels. |
3. Follow procedures to minimise environmental threats. | 3.1 Implement environmental protection measures in relevant procedures. 3.2. Report abnormal emissions/environmental issues to appropriate personnel. 3.3. Apply containment procedures in accordance with SOPs where appropriate. 3.4. Implement approved waste management procedures and practices. 3.5. Follow approved safety procedures and use personal protective equipment as specified in procedures. |
Required Skills
This describes the essential skills and knowledge and their level required for this unit.
Knowledge and understanding is required of organisation environment protection systems, procedures and equipment sufficient to for work activities.
Knowledge is required of organisation standard procedures and work instructions and relevant regulatory requirements, along with the ability to implement them within appropriate time constraints and in a manner relevant to the operation of the system.
Competenceincludes an awareness of:
internal environmental control standards
severity of environmental risks from materials and work processes used
likely impact on the environment of materials and process.
Competency also includes an awareness of the local environment and environmental issues such as:
sensitive waterways/wetlands
flows from the plant to the environment (eg through sandy soil, local creek)
particular environmental threats posed by materials and processes used and the work practices required to minimise these threats.
Also required is the ability to:
communicate using in-plant reporting systems - verbal, electronic and written
initiate first response to an environmental incident in accordance with SOPs
use containment equipment
use personal protective equipment
use other required resources.
Language, literacy and numeracy requirements
This unit requires the ability to read and understand typical product specifications, job sheets, procedures and work instructions, material labels and safety information as provided to operators.
Writing is required to the level of completing workplace forms.
Basic numeracy is required to the extent required by work instructions and procedures.
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required skills and knowledge, the Range Statement and the Assessment Guidelines for this Training Package.
Overview of assessment
A holistic approach should be taken to the assessment.
Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability toidentify actual and potential environmental breaches as appropriate to the job level.
Consistent performance should be demonstrated. For example, look to see that:
standard procedures are followed
deviations from desired conditions are recognised
action specified in the standard procedures is carried out
the impact of work practices/actions on the environment is understood.
Assessment method and context
Assessment will occur using a simulation and will occur in a work like environment.
Competence in this unit may be assessed:
by observation over time on a processing plant
in a situation allowing the generation of evidence of the ability to respond to problems
by using a suitable simulation and/or a range of case studies/scenarios
through a combination of these techniques.
In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.
Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.
Specific resources for assessment
This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.
Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.
Range Statement
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.
Context
This competency applies to all work environments and sectors in the industries. Responses are restricted to a 'first response' approach, including the notifying of appropriate organisation personnel.
Procedures
All operations are performed in accordance with procedures.
Procedures include all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.
Tools and equipment
This competency includes use of equipment and tools such as:
PPE
spill kits.
Hazards
Typical workplace hazards include:
chemicals and hazardous materials
gases and liquids under pressure
moving machinery
materials handling.
Emissions/discharges
Typical emissions/discharges include:
noise
light
odour
gas
smoke vapour
liquid and solids
particulates
fumes.
Problems
Respond to routine problems means 'apply known solutions to a limited range of predictable problems'. Typical problems include:
required information/materials not available
required tool/equipment not available
Appropriate action for non-routine problems may be reported to designated person or other action specified in the procedures.
Sectors
Not applicable.
Employability Skills
This unit contains employability skills.
Licensing Information
Not applicable.