Elements

Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Identify work requirements

1.1 Identify and follow work health and safety, legislative and organisational requirements

1.2 Read work documentation and identify job requirements

1.3 Inspect subfloors against requirements of Australian Standards to ensure that they are dry, smooth, plane, and sound and confirm extent of required preparation and work

1.4 Select and check tools, equipment and materials for suitability, serviceability and safety prior to use

2. Inspect subfloors to determine irregularities

2.1 Inspect and confirm construction type, structure and sub-structure

2.2 Run and check datum lines and confirm accurate dimensions

2.3 Inspect and identify nature and extent of surface irregularities

2.4 Check subfloors and walls for contamination, moisture content, plane, smooth and suitable preparation

2.5 Clean surface using suitable floor preparation equipment and or cleaning agents in accordance with manufacturer recommendation

3. Select primers, additives and cementitious compounds

3.1 Determine suitability of the primers and compounds for compatibility and levelling requirements through trial applications

3.2 Select suitable primers, additives and cementitious compounds based on their functions in accordance with the needs of the job

3.3 Select method of application based on job requirements

3.4 Apply selected primers to the subfloor in accordance with manufacturer instructions

4. Prepare additives and cementitious compounds

4.1 Establish mixing station and mix selected cementitious compounds and additives in accordance with safety management requirements and manufacturer instructions

4.2 Plan a sequence of work that ensures the application of cementitious compounds and additives in logical order

5. Apply cementitious compounds and additives

5.1 Establish working lines and select starting point

5.2 Apply prepared compounds and additives to the surface in accordance with manufacturer instructions

5.3 Inspect completed applications and identify and address deficiencies

6. Complete housekeeping

6.1 Store and recycle unused materials in accordance with workplace procedures

6.2 Check, clean and store tools and equipment in accordance with workplace procedures

6.3 Clean work area and dispose of rubbish safely

6.4 Accurately complete required workplace documentation